SPECIFICATION CONTROL DRAWING
THERMOFIT
DEVICES Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE: SOLDERSLEEVE* DEVICE
SHIELD TERMINATION WITH BRAID
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE IN BETWEEN BRACKETS. DOCUMENT NO.: S03-0X-R-9035
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should
evaluate the suitability of the product for
their application.
DCR NUMBER:
D982097 REPLACES:
D981107
DRAWN BY:
M. FORONDA DATE:
19-Jan-99 REV.:
SEE TABLE DOC ISSUE:
2 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revisions Component Dimensions Shall Accommodate
Cable with Dimensions
Product
Name Ident.
Code L±1.75
(L±0.07) øB
min øC
min H
min øE
max øF
min øD
max
S03-01-R-9035 A 1-HB 16.5
(0.650) 1.9
(0.075) 2.65
(0.105) 8.25
(0.325) 2.65
(0.105) 0.90
(0.035) 1.9
(0.075)
S03-02-R-9035 A 2-HB 16.5
(0.650) 2.65
(0.105) 3.68
(0.145) 8.25
(0.325) 3.68
(0.145) 1.40
(0.055) 2.65
(0.105)
S03-03-R-9035 A 3-HB 16.5
(0.650) 4.3
(0.170) 5.08
(0.200) 8.25
(0.325) 5.08
(0.195) 2.15
(0.085) 4.3
(0.170)
S03-04-R-9035 A 4-HB 19.1
(0.750) 5.95
(0.235) 6.45
(0.255) 8.25
(0.325) 6.45
(0.255) 3.30
(0.130) 5.95
(0.235)
S03-05-R-9035 A 5-HB 19.1
(0.750) 7.0
(0.275) 7.6
(0.300) 8.25
(0.325) 7.6
(0.300) 4.30
(0.170) 7.0
(0.275)
MATERIAL
1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI J-STD-004.
THERMAL INDICATOR: Color change violet to colorless.
3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: blue.
4. PRE-INSTALLED BRAID: Tin plated copper strands. CMA 1000.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting
the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material.
For compatible insulations, see MIL-S-83519/2 or consult Raychem.
2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification
RT-1404 and MIL-S-83519/2 which do not require electrical testing while parts are immersed in water.
3. Temperature range: -55°C to +175°C.
4. Parts shall be marked with identification code per table.
For best results, prepare
the cable as shown:
*A trademark of Raychem Corpor ation.
