4.75 0.4 M3 x 0.5 1.8 1.4 #4-40 0.4 UNC 5.8 11.8 1.4 #4-40 0.4 UNC 5.8 11.8 XM4Z-0013 4.75 0.4 M3 x 0.5 1.8 3.25 0.35 5.8 1.98 1.98 #4-40 UNC 5.8 11.8 XM4Z-0012 4.75 #4-40 UNC XM4Z-0011 2.29 1.145 0.4 M3 x 0.5 1.8 4.75 #4-40 UNC 5.8 A min. 5.8 11.4 min. 6.4 min. 2. Applicable panel thickness is less than 1.2 mm. Note: 1. Two Anchors are required per Connector. 4-R2.5 2-R3.2 39.4 53.3 15 25 Note: 1. The XM4K and XM4L use 9-contact dimensions. 31.0 A 9 (See note.) No. of contacts (N) 5.8 11.8 #4-40 UNC 1.4 #4-40 0.4 UNC 5.8 10 XM4Z-0013 4.75 #4-40 UNC 0.4 5.8 11.8 2.7 XM4Z-0012 4.75 M2.6 x 0.45 4.8 2.2 4.75 #4-40 UNC 4.8 7 #4-40 UNC 0.4 11.8 #4-40 UNC 11.8 #4-40 0.4 UNC 1.4 11.8 4.8 XM4Z-0023 4.75 0.4 M3 x 0.5 1.3 XM4Z-0022 4.75 M2.6 x 0.45 XM4Z-0021 1.980.1 1.980.1 1.145 4.75 #4-40 UNC A0.1 B min. 10 11.4 min. A B 15 33.32 28.8 9 (See note.) 24.99 20.5 No. of contacts (N) 4.8 10.0 #4-40 UNC 10 1.4 #4-40 0.4 UNC 1047 47.04 42.5 Note: 1. Two Anchors are required 25 per Connector. Note: 1. The XM4K and XM4L use 92. Applicable panel contact thickness is less than 1.2 dimensions. mm. 4-R3.4 Two, 3.20.1 dia. 4.8 XM4Z-0023 4.75 0.4 M3 x 0.5 1.3 #4-40 UNC 0.4 4.8 10.0 2.2 XM4Z-0022 4.75 M2.6 x 0.45 -0 +0.1 dia. +0.1 dia. Two, 3.2 -0 XM4Z-0021 0.25 24.990.1 Mounting holes (t = 1.6 mm, bottom view) Dimensions: Panel Mounted (Using Anchor 3 or M3 Screws) Anchor 3 3.96 10.7 7 2.8 1.98 3.4 5.8 12.55 0.6 dia. 3.8 6.2 7.9 #4-40 UNC 19.23 6 11 1 0.25 30.8 24.99 16.33 XM4Z-0011 Dimensions: Not Panel Mounted (Using Anchor 2) Anchor 2 XM4L-1541-132 High-density D-sub Sockets with Straight DIP Terminals Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L Connectors