Cree(R) LMR2 LED Module Cree LED modules provide lighting designers and manufacturers with simple, easy-to-adopt LED lighting solutions that reduce fixture development time and speed time-to-market. The Cree LMR2 LED module is the ideal choice for enabling rapid fixture development where bright, beautiful, long-life lighting is required. The LMR series of modules incorporates a compact system of integrated driver electronics, optics and primary thermal management together with 80- and 90CRI options to address a wide range of residential and commercial lighting applications. This versatile LED lighting module jump starts the design process for 38" (76203 mm) downlights, wall sconces or pendant lights. CLM-DS05 LMR2 Rev 3E Product family data sheet Benefits for Luminaire Designers * * * * * Faster time-to-market and lower system cost with complete, compact light source solution Reduced development time with concurrently designed and tested optics, driver electronics, and primary thermal management Wide variety of design applications enabled with 2700 K, 3000 K, 3500 K and 4000 K correlated color temperatures Industry-leading 5-year limited warranty backed by patented, reliable Cree LED technology Rapid regulatory approval and voluntary qualification of final luminaire enabled by: UL(R) approval (120 V) California Title 24 compliance (120 V) LED LM-80 data for US ENERGY STAR(R) Compliance with CE and other international standards (230 V) Benefits for End Users * * * * * * www.cree.com/modules * Two color rendering options: 90 CRI for retail, museums and hospitality 80 CRI for general illumination Significant energy savings over traditional lighting through superior efficacy up to 72 lm/W Visually comfortable appearance whether the module is powered on or off Designed to last 35,000 hours at L70 Consistent light quality over time and temperature Dimming down to 5% of rated light output using standard incandescent and electronic low-voltage dimmers No UV or mercury units: mm Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and TrueWhite(R) are registered trademarks and the Cree logo and the Cree TrueWhite Technology logo are trademarks of Cree, Inc. ENERGY STAR(R) is a registered trademark of the U.S. Environmental Protection Agency. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 LMR2 LED Module Characteristics - 650 lumens (TrueWhite(R)) Nominal Luminous Flux (lm)* CCT (K) CRI 650 4000 > 90 650 3500 > 90 650 3000 > 90 650 2700 > 90 Input Power (W) Module Efficacy (lm/W) Input Voltage (V)/Frequency (Hz)** Power Factor Dimming Order Code 10 65 120/60 > .80 TRIAC LMR020-0650-40F9-10100TW 10.5 62 230/50 > .90 TRIAC LMR020-0650-40F9-20100TW 10 65 120/60 > .80 TRIAC LMR020-0650-35F9-10100TW 10.5 62 230/50 > .90 TRIAC LMR020-0650-35F9-20100TW 10 65 120/60 > .80 TRIAC LMR020-0650-30F9-10100TW 10.5 62 230/50 > .90 TRIAC LMR020-0650-30F9-20100TW 10 65 120/60 > .80 TRIAC LMR020-0650-27F9-10100TW 10.5 62 230/50 > .90 TRIAC LMR020-0650-27F9-20100TW Power Factor Dimming Order Code * Luminous flux measured at Tc = 55 C ** Input ranges are 110-130 V/60 Hz and 220-240 V/50 Hz * Maximum power = 12.1 W Note: Cree maintains a tolerance of 7% on flux and power measurements Characteristics - 750 lumens Nominal Luminous Flux (lm)* CCT (K) CRI Input Power (W) Module Efficacy (lm/W) Input Voltage (V)/Frequency (Hz)** 750 4000 > 80 11.5 65 120/60 > .90 TRIAC LMR020-0750-40F8-10100EW 750 3500 > 80 11.5 65 120/60 > .90 TRIAC LMR020-0750-35F8-10100EW 750 3000 > 80 11.5 65 120/60 > .90 TRIAC LMR020-0750-30F8-10100EW 750 2700 > 80 11.5 65 120/60 > .90 TRIAC LMR020-0750-27F8-10100EW * Luminous flux measured at Tc = 55 C ** Input range is 110-130 V/60 Hz * Maximum power = 13.5 W Note: Cree maintains a tolerance of 7% on flux and power measurements Chromaticity The Cree LMR2 LED module provides high color consistency around the specified color temperature. Individual LEDs are tested and matched in order to meet our designed chromaticity specification. Secondary optics can be added to the module but will reduce light output and may also alter the color characteristics of the final luminaire design. Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and TrueWhite(R) are registered trademarks and the Cree logo and the Cree TrueWhite Technology logo are trademarks of Cree, Inc. ENERGY STAR(R) is a registered trademark of the U.S. Environmental Protection Agency. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 2 LMR2 LED Module Photometry 750 Lumens 650 Lumens TrueWhite(R) Intensity (Candlepower) Angle Mean CP 0 5 Intensity (Candlepower) 90 90 Angle Mean CP 300 0 352 298 5 350 15 282 15 338 25 250 25 306 35 204 35 252 45 153 45 181 55 104 55 113 65 60 65 60 75 41 75 22 85 2 85 2 90 0 90 0 100 45 200 100 200 45 300 300 0 400 0 Zonal Lumens Zonal Lumens Zone Lumens % Zone Lumens % 0-30 222 34 0-30 269 34 0-40 350 54 0-40 425 54 0-60 562 86 0-60 668 86 0-90 650 100 0-90 757 100 Thermal management guidelines The Cree LMR2 LED module is designed to perform in a variety of environments. To achieve lifetime and performance estimates, and to maintain the warranty, the final luminaire design cannot allow the module case temperature (Tc) point shown on page one to exceed the maximum of the ranges shown below when the fixture is at thermal equilibrium. Follow the mechanical and thermal design guidelines listed in the Cree LMR2 LED Module Design Guide to ensure proper thermal management.proper thermal management. Operating Temperature (at Tc point) 650 Lumens TrueWhite Operating Temperature (at Tc point) 750 Lumens Optional Heat Sink Order Code 0-70 C 0-75 C LMR020-HS02-0000-0000001 Copyright (c) 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree(R) and TrueWhite(R) are registered trademarks and the Cree logo and the Cree TrueWhite Technology logo are trademarks of Cree, Inc. ENERGY STAR(R) is a registered trademark of the U.S. Environmental Protection Agency. UL(R) and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cree, Inc.: LMR020-0650-CCF9-1KIT2X LMR020-0650-CCF9-2KIT2X LMR020-HS02-0000-0000001 LMR020-0650-27F910100TW LMR020-0650-27F9-20100TW LMR020-0650-30F9-10100TW LMR020-0650-30F9-20100TW LMR0200650-35F9-10100TW LMR020-0650-35F9-20100TW LMR020-0650-40F9-10100TW LMR020-0650-40F9-20100TW LMR020-0750-35F8-10100EW LMR020-0750-30F8-10100EW LMR020-0750-40F8-10100EW LMR020-0750-27F810100EW