CL50 Column Light
Multi-Color General Purpose or Audible Indicators
Features
•Rugged, cost-effective and easy-to-install multi-color indicators
•Illuminated light provides easy-to-see operator guidance and
indication of equipment status
•1, 2, or 3 color models available
•Optional audible function with variable intensity
•Compact devices are completely self-contained — no controller
needed
•Immune to ambient light, EMI and RFI interference
•18 to 30V dc operation
•No assembly required
Multi-Color General-Purpose Models
InputsConnection**
LED Function* – Lights Independently
Selected
ColorsModel Color 3Color 2Color 1
PNP
4-pin Euro
integral QD
connector
––Green
1
CL50GXXPQ
NPN––GreenCL50GXXNQ
PNP–Red–CL50XRXPQ
NPN–Red–CL50XRXNQ
PNP–RedGreen
2
CL50GRXPQ
NPN–RedGreenCL50GRXNQ
PNPYellowRedGreen
3
CL50GRYPQ
NPNYellowRedGreenCL50GRYNQ
0 145315 7
10/2009P/N 145315 rev. C
Multi-Color Audible Models
InputsConnection**
LED Function* – Lights
Independently Selected
ColorsModel Color 3Color 2Color 1
PNP
5-pin Euro integral
QD connector
––Green
1
CL50GXXAPQ
NPN––GreenCL50GXXANQ
PNP–Red–CL50XRXAPQ
NPN–Red–CL50XRXANQ
PNP–RedGreen
2
CL50GRXAPQ
NPN–RedGreenCL50GRXANQ
PNPYellowRedGreen
3
CL50GRYAPQ
NPNYellowRedGreenCL50GRYANQ
* Contact factory for other colors and color combinations.
** Integral QD models are listed.
•For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, CL50GRYPQP).
•For 2 m (6.5’) cable, omit suffix Q from model number (example, CL50GRYP).
•A model with a QD requires a mating cable (see Quick-Disconnect (QD) Cordsets on page 7).
Model Key*
Blank= 2mcable
Q= Integral EuroQD
QP= Europigtail QD
Audible–5-wire
Non-audible–4-wire
G= Green
R= Red
Y= Yellow
B= Blue
X= NoColor
A=Steadytone
Blank=Noalarm
Color Audible
Housing C1 C2 C3 Alarm Input Connection
P=PNP(Sourcing)
N=NPN(Sinking)
CL50 A Q
*Create your own model according to this key if the standard selection from page 1 does not meet y our requirements.
Consult factory for availability.
P/N 145315 rev. CBanner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
2
145315
Specifications
DescriptionFeature
18 to 30V dc (10% max. ripple)
Supply Voltage and
Current Indicators: @ 100 mA max. current at 18V dc; 70 mA max. current at 30V dc
Audible Alarm: @ 25 mA max. current at 18 to 30V dc
LEDs or audible alarm are independently selected: Green, Red, Yellow; 1-3 colors
depending on model
Indicators
Indicator ON/OFF: 10 ms (max.)Input Response Time
2.7 KHz ± 500 Hz
Oscillation Frequency
( Audible only ) Max. Intensity (typical): 95 db @ 1 meter
The audible intensity can be adjusted by unscrewing the cover.The cover should not
be unscrewed more than one and a half turns or it may detach during operation. For
max. intensity, remove the center plug by rotating it 180° counterclockwise.
Audible Adjustments
Bases and Covers: ABS
Construction
Light Segment: Polycarbonate
General-Purpose: IEC IP67
Environmental Rating
Audible: IEC IP50
Integral 4-pin or 5-pin Euro-style QD, 150 mm PVC pigtail with QD, or 2 m (6.5’) integral
cable, depending on model
Connections
General-Purpose: −40° to +50° C (−40° to +122° F)
Operating Conditions
Audible: −20° to +50° C (−4° to +122° F)
Certifications
3Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 145315 rev. C
145315
Multi-Color General-Purpose Dimensions
M30x1.5
(mounting nut
included)
Internal Threads
1/2–14 NPSM
Max Torque 2.25 Nm
[20in–lbf]
50.0 [1.97"]
19.0 [0.75"]
8.3 [0.33"]
114.2 [4.50"]
Multi-Color Audible Dimensions
M30x1.5
(mounting nut
included)
Internal Threads
1/2–14 NPSM
Max Torque 2.25 Nm
[20in–lbf]
50.0 [1.97"]
19.0 [0.75"]
8.3 [0.33"]
145.3 [5.70"]*
P/N 145315 rev. CBanner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
4
145315
Hookups – Multi-Color General-Purpose Models
Key:Sinking (NPN) InputSourcing (PNP) Input
1 = Brown
KEY
1 = Brown
2 = White
3 = Blue
4 = Black
Indicator
Color
C2
C3
C1
3
4
1
2
18-30V dc
KEY
1 = Brown
2 = White
3 = Blue
4 = Black
Indicator
Color
C2
C3
C1
1
4
3
2
18-30V dc
2 = White
3 = Blue
4 = Black
C1 = Color 1
C2 = Color 2
C3 = Color 3
If there is an X in the model number, that corresponding wire will not be used
Hookups – Multi-Color Audible Models
Key:Sinking (NPN) InputSourcing (PNP) Input
1 = Brown
KEY
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
Indicator
Color
C2
C3
C1
A
1
4
3
5
2
18-30V dc
KEY
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
Indicator
Color
C2
C3
C1
A
3
4
1
5
2
18-30V dc
2 = White
3 = Blue
4 = Black
5 = Gray
C1 = Color 1
C2 = Color 2
C3 = Color 3
A = Audible
If there is an X in the model number, that corresponding wire will not be used
5Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 145315 rev. C
145315
Functional Truth Table: PNP Models
Pin 2 (White Wire)Pin 1 (Brown Wire)Pin 4 (Black Wire)LED Function
+VdcColor 1 ON
+VdcColor 2 ON
+VdcColor 3 ON
+Vdc+VdcColor 3 ON (color 3 inhibits color 1)
+Vdc+VdcColor 2 ON (color 2 inhibits color 1)
+Vdc+VdcColor 3 ON (color 3 inhibits color 2)
+Vdc+Vdc+VdcColor 3 ON (color 3 inhibits colors 1 & 2)
NOTES:
•Pin 3 (blue wire) connected to ground (–)
•Alarm models: Alarm function is independent of light functions
Functional Truth Table: NPN Models
Pin 2 (White Wire)Pin 3 (Blue Wire)Pin 4 (Black Wire)LED Function
–VdcColor 1 ON
–VdcColor 2 ON
–VdcColor 3 ON
–Vdc–VdcColor 3 ON (color 3 inhibits color 1)
–Vdc–VdcColor 2 ON (color 2 inhibits color 1)
–Vdc–VdcColor 3 ON (color 3 inhibits color 2)
–Vdc–Vdc–VdcColor 3 ON (color 3 inhibits colors 1 & 2)
NOTES:
•Pin 1 (brown wire) connected to +Vdc
•Alarm models: Alarm function is independent of light functions
P/N 145315 rev. CBanner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
6
145315
Quick-Disconnect (QD) Cordsets
4-Pin Euro-Style Cables – Single-Ended
PinoutDimensionsLengthModelStyle
4-Pin 4-Wire
1 = Brown
2 = White
3 = Blue
4 = Black
4-Pin Euro
2
3
4
1
M12 x 1
ø 15 mm
(0.6")
44 mm max.
(1.7")
2 m (6.5')
5 m (15')
9 m (30')
MQDC-406
MQDC-415
MQDC-430
4-pin
Euro-style
straight
1 = Brown
38 mm max.
(1.5")
M12 x 1
ø 15 mm
(0.6")
38 mm max.
(1.5")
2 m (6.5')
5 m (15')
9 m (30')
MQDC-406RA
MQDC-415RA
MQDC-430RA
4-pin
Euro-style
Right-angle
2 = White
3 = Blue
4 = Black
Quick-Disconnect (QD) Cordsets
5-Pin Euro-Style Cables – Single-Ended
PinoutDimensionsLengthModelStyle
Female
M12 x 1
ø 15 mm
(0.6")
44 mm max.
(1.7")
2 m (6.5')
5 m (15')
9 m (30')
MQDC1-506
MQDC1-515
MQDC1-530
5-pin Euro-style
Straight
2
3
4
1
5
1 = Brown
38 mm max.
(1.5")
M12 x 1
ø 15 mm
(0.6")
38 mm max.
(1.5")
2 m (6.5')
5 m (15')
9 m (30')
MQDC1-506RA
MQDC1-515RA
MQDC1-530RA
5-pin Euro-style
Right-Angle
2 = White
3 = Blue
4 = Black
5 = Gray
7Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 145315 rev. C
145315
Mounting Brackets
Dimensions (all measurements in mm)FeaturesModel
SMB30A
•Right-angle brac ket with curved slot f or v ersatile
orientation
•Clearance for M6 (¼") hardware
•30 mm mounting hole
•12-ga. stainless steel
Hole center spacing: A to B=40.0
Hole size: A=ø 6.3, B=27.3 x 6.3, C=ø
30.5
SMB30FA
•Swivel bracket with tilt and pan movement for
precision adjustment
•30 mm mounting hole
•12-ga. 304 stainless steel
A=3/8 - 16 x 50.8
Hole size: B=ø 30.1
SMB30MM
•12-ga. stainless steel bracket with curved
mounting slots for versatility and orientation
•Clearance for M6 (¼") hardware
•30 mm mounting hole Hole center spacing: A=51.0, A to
B=25.4
Hole size: A=42.6 x 7.0, B=ø 6.4, C=ø
30.1
SMB30SC
•Swivel bracket with 30 mm mounting hole
•Black reinforced thermoplastic polyester
•Stainless steel mounting and swivel locking
hardware included
P/N 145315 rev. CBanner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
8
145315
Dimensions (all measurements in mm)FeaturesModel
Hole center spacing: A to B=50.8
Hole size: A=ø 7.0
SMBAMS30P
•Flat SMBAMS series bracket
•30 mm mounting hole
•Articulation slots for 90+° rotation
•12-ga. 300 series stainless steel
Hole center spacing: A=26.0, A to
B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø
31.0
SMBAMS30RA
•Right-angle SMBAMS series bracket
•30 mm mounting hole
•Articulation slots for 90+° rotation
•12-ga. cold rolled stainless steel Hole center spacing: A=26.0, A to
B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø
31.0
9Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 145315 rev. C
145315
Mounting Systems - Elevated Mount
Mounting SystemFeaturesModel
SA-M30TE12 •Streamlined acetal stand-off pipe
adapter/cover
•Connects between TL50 Tower Light
and ½” NPSM/DN15 pipe
•Mounting hardware included
AluminumStainless Steel •Elevated-use stand-off pipe (½”
NPSM/DN15)
SOP-E12-150A
Length: 150 mm
(6")
SOP-E12-150SS
Length: 150 mm
(6")
•Polished 304 stainless steel or
anodized aluminum surface
•½ NPT thread at both ends
•Compatible with most industrial
environments
SOP-E12-300A
Length: 300 mm
(12")
SOP-E12-300SS
Length: 300 mm
(12")
SA-E12M30 •Streamlined acetal mounting base
adapter/cover
•Connects between ½” NPSM/DN15
pipe and 30 mm (1-3/16”) drilled hole
•Mounting hardware included
P/N 145315 rev. CBanner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
10
145315
11Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 145315 rev. C
145315
WARNING . . . Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so
could lead to serious injury or death
This product does NO T include the self-checking redundant circuitry necessary to allow its use in personnel saf ety
applications. A sensor f ailure or malfunction can cause either an energized or de-energized sensor output condition.
Consult your Banner Safety Products catalog for safety products that meet OSHA, ANSI and IEC standards for
personnel protection.
W arranty: Banner Engineering Corp. will repair or replace, free of charge , any product
of its manuf acture found to be def ectiv e at the time it is returned to the factory during
the warranty period.This warranty does not co ver damage or liability for the improper
application of Banner products.This warranty is in lieu of any other warranty either
expressed or implied.
145315
