Product Data Sheet Amphenol(R) Industrial Amphe-PPM Quick Disconnect Connectors No. 195 The Amphe-PPM is a rapid mate, push/pull connector which provides positive mating in limited space and ease of use. The design features of the Amphe-PPM allow consumers to save cost in space savings and in installation. Amphe-PPM, the high performance signal and power interconnection solution, is ideally suited to many commercial and industrial applications including, but not limited to: * Medical Equipment * Instrumentation/Test & Measurement * Communication Equipment The Amphe-PPM continues Amphenol's commitment of providing new products to meet customer and market demands for new emerging technologies and advancing applications. Features and Benefits of Amphe-PPM Connectors * Push/pull rapid mate connector system - high performance of 500 + mating cycles * Sealed or non-sealed connector versions NON-SEALED VERSION: * Available in 12mm and 16mm shell sizes * From 2 up to 12 contacts of 1.0mm to 2.5mm diameter (see back side for insert arrangement charts) * Jam nut receptacle and straight plug are available with a rubber boot or standard cable clamp rear accessory * Non-reflective nickel or black epoxy finish * IP55 rated SEALED VERSION: * Available in 10mm, 12mm, 16mm and 18mm shell sizes * From 2 up to 14 contacts of 0.8mm to 2.5mm diameter (see back side for insert arrangement charts) * Jam nut receptacle and straight plug come with jacketed cable PG sealing gland * Non-reflective nickel finish only * IP67 rated * Three shell styles available: box mount and jam nut receptacles and a straight plug * Designed to IEC 61984 * Inserts have a UL94V-0 flammability rating * Operating temperature: -40 to 100C * Solder contacts standard, crimp by special request * Non-magnetic product standard Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. AMPHENOL is a registered trademark of Amphenol Corporation. @2006 Amphenol Corporation Amphenol Printed in U.S.A. 4/2006 HOW TO ORDER Amphe-PPM Sealed Connectors APS D S A 6 E1 Sealing Range: APS designates Amphe-PPM Sealed Series Connectors Diameters in mm Series Shell Size: C ..... designates 10mm shell size D ..... designates 12mm shell size E ...... designates 16mm shell size F ...... designates 18mm shell size Contact Type: P ...... designates pin contacts S ...... designates socket contacts A B C D 1 1 0.8 0.8 2 3 4 5 Table 3 Shell Size "E" 16mm Contact Insert Diameter No. of Arrangement (mm) Contacts A B C D E F G H I J 1.5 2.5 1 1.5 1 1.5 1 1 1 1 2 2 3 3 4 4 5 7 9 12 E2 N/A N/A 3 - 6.5 D 3 - 6.5 PG7 4-8 PG9 E 4-8 PG9 7 - 12 PG13.5 F 7 - 12 PG13.5 10 - 14 PG16 Shell Style: 2 ...... designates square flange receptacle 6 ...... designates straight plug 7 ...... designates jam nut receptacle Insert Arrangement Designator See Insert Arrangement Tables 1, 2, 3, 4 Table 1 Shell Size "C" 10mm Contact Insert Diameter No. of Arrangement (mm) Contacts E1 C Table 2 Shell Size "D" 12mm Contact Insert Diameter No. of Arrangement (mm) Contacts A B C D E F Insert Arrangement A B C D 1.6 1 1 1 1 1 2 3 4 5 6 7 Table 4 Shell Size "F" 18mm Contact Diameter (mm) 2.5 1.5 1.5 (3 contacts), 1 (5 contacts) 1 No. of Contacts 3 5 8 5 PG7 HOW TO ORDER Amphe-PPM Non-Sealed Connectors APN A S A 6 N R APN designates Amphe-PPM Non-Sealed Series Connectors Rear Accessory: R ..... designates with rubber boot C ..... designates with cable clamp Shell Size: A ...... designates 12mm shell size B ...... designates 16mm shell size Shell Finish: N ..... designate non-reflective nickel finish B ...... designates black epoxy finish Contact Type: P ...... designates pin contacts S ...... designates socket contacts Shell Style: 2 ...... designates square flange receptacle 6 ...... designates straight plug 7 ...... designates jam nut receptacle Insert Arrangement Designator See Insert Arrangement Tables 5 & 6 Table 5 Shell Size "A" 12mm Contact Insert Diameter No. of Arrangement (mm) Contacts A B C D E F 1.6 1 1 1 1 1 2 3 4 5 6 7 Table 6 Shell Size "B" 16mm Contact Insert Diameter No. of Arrangement (mm) Contacts A B C D E F G H I J 1.5 2.5 1 1.5 1 1.5 1 1 1 1 2 2 3 3 4 4 5 7 9 12 For additional information on the Amphe-PPM connectors consult Amphenol Industrial Operations. For further information on your individual application requirements, contact: Amphenol Corporation Amphenol Industrial Operations 40-60 Delaware Avenue Sidney, NY 13838-1395 Phone: 1-607-563-5011 Fax: 1-607-563-5351 Internet: www.amphenol-industrial.com