Product Data Sheet
Amphenol® Industrial Amphe-PPM
Quick Disconnect Connectors
No. 195
The Amphe-PPM is a rapid mate, push/pull
connector which provides positive mating in
limited space and ease of use. The design
features of the Amphe-PPM allow consumers
to save cost in space savings and in installa-
tion.
Amphe-PPM, the high performance signal and
power interconnection solution, is ideally suited
to many commercial and industrial applications
including, but not limited to:
Medical Equipment
Instrumentation/Test & Measurement
Communication Equipment
The Amphe-PPM continues Amphenol’s
commitment of providing new products to meet
customer and market demands for new emerg-
ing technologies and advancing applications.
Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and
reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such
use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not
apply to all connectors.
AMPHENOL is a registered trademark of Amphenol Corporation.
@2006 Amphenol Corporation Printed in U.S.A. 4/2006
Amphenol
Features and Benefits of Amphe-PPM Connectors
Push/pull rapid mate connector system - high performance of 500 + mating cycles
Sealed or non-sealed connector versions -
NON-SEALED VERSION:
Available in 12mm and 16mm shell sizes
From 2 up to 12 contacts of 1.0mm to 2.5mm diameter (see back side for insert arrangement charts)
Jam nut receptacle and straight plug are available with a rubber boot or standard
cable clamp rear accessory
Non-reflective nickel or black epoxy finish
IP55 rated
SEALED VERSION:
Available in 10mm, 12mm, 16mm and 18mm shell sizes
From 2 up to 14 contacts of 0.8mm to 2.5mm diameter (see back side for insert arrangement charts)
Jam nut receptacle and straight plug come with jacketed cable PG sealing gland
Non-reflective nickel finish only
IP67 rated
Three shell styles available: box mount and jam nut receptacles and a straight plug
Designed to IEC 61984
Inserts have a UL94V-0 flammability rating
Operating temperature: –40° to 100°C
Solder contacts standard, crimp by special request
Non-magnetic product standard
HOW TO ORDER
Amphe-PPM Sealed Connectors
APS D S A 6 E1
Sealing Range:
Diameters in mm
Series E1 E2
C N/A N/A 3 - 6.5 PG7
D 3 - 6.5 PG7 4 - 8 PG9
E 4 - 8 PG9 7 - 12 PG13.5
F 7 - 12 PG13.5 10 - 14 PG16
Shell Style:
2 ...... designates square flange receptacle
6 ...... designates straight plug
7 ...... designates jam nut receptacle
APS
designates Amphe-PPM
Sealed Series Connectors
Shell Size:
C ..... designates 10mm shell size
D ..... designates 12mm shell size
E ...... designates 16mm shell size
F ...... designates 18mm shell size
Contact Type:
P ...... designates pin contacts
S ...... designates socket contacts
Insert Arrangement Designator
See Insert Arrangement Tables 1, 2, 3, 4
Table 1
Shell Size “C” 10mm
Contact
Insert Diameter No. of
Arrangement (mm) Contacts
A12
B13
C 0.8 4
D 0.8 5
Table 2
Shell Size “D” 12mm
Contact
Insert Diameter No. of
Arrangement (mm) Contacts
A 1.6 2
B13
C14
D15
E16
F17
Table 3
Shell Size “E” 16mm
Contact
Insert Diameter No. of
Arrangement (mm) Contacts
A 1.5 2
B 2.5 2
C13
D 1.5 3
E14
F 1.5 4
G15
H17
I19
J112
Table 4
Shell Size “F” 18mm
Contact
Insert Diameter No. of
Arrangement (mm) Contacts
A 2.5 3
B 1.5 5
C 1.5 (3 contacts), 1 (5 contacts) 8
D1 5
HOW TO ORDER
Amphe-PPM Non-Sealed Connectors
APN A S A 6 N R
Rear Accessory:
R ..... designates with rubber boot
C ..... designates with cable clamp
Shell Finish:
N ..... designate non-reflective nickel finish
B ...... designates black epoxy finish
Shell Style:
2 ...... designates square flange receptacle
6 ...... designates straight plug
7 ...... designates jam nut receptacle
APN
designates Amphe-PPM
Non-Sealed Series Connectors
Shell Size:
A ...... designates 12mm shell size
B ...... designates 16mm shell size
Contact Type:
P ...... designates pin contacts
S ...... designates socket contacts
Insert Arrangement Designator
See Insert Arrangement Tables 5 & 6
Table 5
Shell Size “A” 12mm
Contact
Insert Diameter No. of
Arrangement (mm) Contacts
A 1.6 2
B13
C14
D15
E16
F17
Table 6
Shell Size “B” 16mm
Contact
Insert Diameter No. of
Arrangement (mm) Contacts
A 1.5 2
B 2.5 2
C13
D 1.5 3
E14
F 1.5 4
G15
H17
I19
J112
For additional information on the Amphe-PPM connectors consult Amphenol Industrial Operations.
For further information on your individual application requirements, contact:
Amphenol Corporation
Amphenol Industrial Operations
40-60 Delaware Avenue
Sidney, NY 13838-1395
Phone: 1-607-563-5011 Fax: 1-607-563-5351
Internet: www.amphenol-industrial.com