EC10E 10mm Size Through Shaft Type A series of compact and long-life encoders with unique through shaft design Typical Specifications Items Specifications Encoders Rating 1mA 5V DC Operating life 100,000 cycles -5 to 45 -40 to 85For Automotive Operating temperature range Metal Shaft Product Line Detent torque mNm Mount height Hmm Number of detent Number of pulse Operating direction Minimum order unitpcs. Japan Product No. Export EC10E1220505 7 Insulated Shaft 53 9 EC10E1220501 24 12 11 Through Shaft Type 7 Horizontal 3,200 EC10E1220503 3,200 12 EC10E1260502 24 EC10E1260507 63 11 Packing Specifications Ring Type Bulk Number of packagespcs. 1 case /Japan 1 case /export packing Export package measurements mm 3,200 3,200 374x254x166 Dimensions Unit:mm PC board mounting hole dimensions (Viewed from mounting side) Style F (4.4) 0.6 F 3 3.5 A : Output signal A B : Output signal B 2 3.7 2 8 o2.9 6.1 Output Wave B signal V1=V2=2.5V max. OFF ON ON A signal B signal Test circuit OFF OFF ON R Terminal B 284 t V1 ON V2 Detent stability position CW direction Terminal C Measurement conditionRotation speed 360/s Detent stability position cannot be specified for B signal. t R Terminal A Encoder Detent stability position CW direction Output waveform 5V DC 5V EC10E1260 OFF 5 Sliding Noise EC10E1220 A signal A B C le A B C 0.5 6- ho 5 0.4 60 o1 Mounting surface 3-1.5 3-1.73 1.8 3- 3.5 H 10.8 1.7 2 3.2 2.4 o2.2 3.6 0.6 5 Shaft insert Detail E Shaft hole position will be at random. (o3.6) 9.8 E 2-2.1 H 7 9 11 Detent stability position cannot be specified for B signal. ON OFF ON Sliding direction t : Masking time to avoid chattering At R = 10k Chattering : 5ms max. Bounce : 5ms max. Refer to P.299 for soldering conditions. Encoders List of Varieties Ring type Through shaft type Type Series 5mm size 10mm size EC05E EC10E 21mm size EC21A EC21C Photo Encoders Output IncrementalTwo phase A and B Shaft types Ring type Through shaft Operating direction Vertical Horizontal Horizontal -- -- Metal Shaft Number of pulse / Number of detent 12/12 12/24 12/12 9/18 15/30 15/30 Features Surface mount type -- -- -- W Insulated Shaft Dimensions mm 5.7 7.5 9.8 22 21.6 D 6 3.3 4.4 H 2.7 7.25 10.6/12.6/14.6 4 -5 to + 45 -40 to + 85 For Automotive -40 to 85 Operating temperature range -30 to +85 Through Hollow Shaft Shaft Type Operating life Automotive use 21.6 100,000 cycles 50,000 cycles -- Rating 0.55mA 5.5V DC 1mA 5V DC 10mA 5V DC Max./min. operating currentResistive load 0.55mA / -- 10mA /1mA Life cycle (availability) Ring Type Electrical performance Insulation resistance 50M min. 50V DC Voltage proof 50V AC for 1 minute 100M min. 250V DC 300V AC for 1minute or 360V AC for 2s 300V AC for 1minute or 360V AC for 1s Rotational torque Without detent -- -- -- -- Detent torque 1.61.3mNm 53mNm 63mNm 75mNm 125mNm 167mNm 178mNmInitial 7 12- 4mNmAfter reflow Push-pull strength -- -- Mechanical performance Shaft configuration Ring type Through shaft Reflow Insertion Switch type -- -- -- -- Contact arrangement -- -- -- -- Travelmm -- -- -- -- Operating force N -- -- -- -- Rating -- -- -- -- Contact resistance -- -- -- -- Operating life -- -- -- -- 282 284 Terminal type Switch Specifications 100N Page Insertion 285 Encoders Soldering Conditions 299 Encoders Cautions 300 Notes 1. The operating temperature range for automotive applications can be raised upon Request. Please contact us for details. 2. Indicates applicability to all products in the series, while indicates applicability to some products in the series. 256 Encoders / Soldering Conditions Reference for Manual Soldering Tip temperature Soldering time No. of solders EC05E, EC09E, EC10E, EC111, EC11B, EC11E, EC11G, EC11K, EC11M, EC11N, EC12D, EC12E, EC18A, EC21A, EC28A, EC35A, EC35AH, EC40A, EC45A, EC50A, EC60B, EM11B, EC21C, EC28C, EC35CH 350 max. 3s max. 1 time EC11J 35010 3 1 s 0 2 times Encoders Series Reference for Dip Soldering Dip soldering No. of solders Soldering temperature Soldering time EC09E, EC11B, EC111, EC11E, EC11G, EC11K, EC11M, EC11N, EC18A, EC21A, EC28A, EC35A, EC35AH, EC50A, EC60B 100 max. 2 min. max. 2605 51s 2 times max. EM11B 100 max. 1 min. max. 260 max. 3s max. 2 times max. EC10E, EC12D, EC12E 100 max. 1 min. max. 2605 31s 2 times max. EC40A 110 max. 1 min. max. 260 max. 10s max. 1 time EC45A 100 max. 2 min. max. 260 max. 5s max. 2 times max. Ring Type Example of Reflow Soldering Condition Temperature profile 300 Temperature (C ) Through Shaft Type Heating time Insulated Shaft Soldering surfacetemperature Metal Shaft Preheating Series A B 200 C D 100 Room temperature Time (s) Pre-heating E max. F max. G max. H max. Series A B C D E F G H No. of reflows EC11J 260 230 180 150 2 min. max. 3s 40s 4 min. max. 2 times max. EC05E 250 min. 230 min. 180 150 60s to 120s 30s to 40s 2 times max. EC21C 230 to 245 220 200 150 60s to 120s 25s to 60s 300s max. 1 time max. 260 230 180 150 2 min. min. 3s 40s 230s max. 1 time max. EC28C, EC35CH Notes 1. When using an infrared reflow oven, solder may sometimes not be applied. Be sure to use a hot air reflow oven or a type that uses infrared rays in combination with hot air. 2. The temperatures given above are the maximum temperatures at the terminals of the encoder when employing a hot air reflow method. The temperature of the PC board and the surface temperature of the encoder may vary greatly depending on the PC board material, its size and thickness. Ensure that the surface temperature of the encoder does not rise to 250 or greater. 3. Conditions vary to some extent depending on the type of reflow bath used. Be sure to give due consideration to this prior to use. 299