INCH-POUND MS27473N w/AMENDMENT 1 15 November 2012 SUPERSEDING MS27473N 2 February 2012 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, SERIES II Reactivated after 24 May 2004 and may be used for new and existing designs and acquisitions. This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Plug, classes E, T and P. AMSC N/A FSC 5935 Source: http://assist.dla.mil -- Downloaded: 2021-04-29T16:44Z Check the source to verify that this is the current version before use. MS27473N w/AMENDMENT 1 FIGURE 1. Plug, classes E, T and P - Continued. 2 Source: http://assist.dla.mil -- Downloaded: 2021-04-29T16:44Z Check the source to verify that this is the current version before use. MS27473N w/AMENDMENT 1 L max Shell size Class E Q R W .015 Class P Class T dia dia See note 5 See note 6 max + .005 -.006 8 .750 .316 10 .859 .436 12 1.031 .549 14 1.156 .675 1.281 .799 18 1.406 .893 20 1.531 1.018 22 1.641 1.143 .844 1.766 1.268 16 24 1.026 1.020 1.104 .766 1.080 .547 .524 .575 Inches mm Inches mm Inches mm Inches mm .005 0.13 .524 13.31 .844 21.44 1.143 29.03 .006 0.15 .547 13.89 .859 21.82 1.156 29.36 .010 0.25 .549 13.94 .893 22.68 1.268 32.21 .015 0.38 .575 14.61 .953 24.21 1.281 32.54 .036 0.91 .675 17.15 1.018 25.86 1.406 35.71 .316 8.03 .750 19.05 1.020 25.91 1.531 38.89 .391 9.93 .766 19.46 1.031 26.19 1.641 41.68 .436 11.07 .799 20.29 1.080 27.43 1.766 44.86 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. For main key polarization and key positions, see MIL-DTL-38999. 4. Dimensions and tolerances are in accordance with ASME Y14.5. 5. Applicable potting forms for class P: SAE-AS85049/58 and SAE-AS85049/75. 6. To the end of teeth. FIGURE 1. Plug, classes E, T and P - Continued. 3 Source: http://assist.dla.mil -- Downloaded: 2021-04-29T16:44Z Check the source to verify that this is the current version before use. MS27473N w/AMENDMENT 1 REQUIREMENTS: Dimensions and configurations: See figure 1. Interface dimensions shall be in accordance with MIL-DTL-38999. Mating connectors: MIL-DTL-38999/10, MS27472, MS27474, MS27475, MS27476, MS27477, MS27478, MS27479, MS27480,MS27497, MS27499, MS27508 and MS27513. Insert arrangements: See MIL-STD-1560. For class E, compression nut in accordance with SAE-AS85049/27 shall be included. Part or Identifying Number (PIN) example: MS27473 T 24 F 61 P A MS number Class Shell size Finish (color) Insert arrangement number Contact style (P or S) Polarizing positions No letter is required for normal. Restrictions. Class E is inactive for new design. Class P is inactive for new design for the Air Force. Finish F is not for Navy use. Finish F is inactive for new design for the Air Force. Amendment notations. The margins of this specification are marked with vertical lines to indicate modifications generated by this amendment. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. 4 Source: http://assist.dla.mil -- Downloaded: 2021-04-29T16:44Z Check the source to verify that this is the current version before use. MS27473N w/AMENDMENT 1 Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-DTL-38999/10 MIL-STD-1560 MS27472 MS27474 MS27475 MS27476 MS27477 MS27478 MS27479 MS27480 MS27497 MS27499 MS27508 MS27513 ASME Y14.5 SAE-AS85049/27 SAE-AS85049/58 SAE-AS85049/75 CONCLUDING MATERIAL Custodians: Army - CR Navy - AS Air Force - 85 DLA - CC Preparing activity: DLA - CC (Project 5935-2012-196) Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 DLA - IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil. 5 Source: http://assist.dla.mil -- Downloaded: 2021-04-29T16:44Z Check the source to verify that this is the current version before use.