MS27473N
w/AMENDMENT 1
4
REQUIREMENTS:
Dimensions and configurations: See f igure 1.
Interface dimensions shall be in accordance with MIL-DTL-38999.
Mating connectors: MIL-DTL-38999/10, MS27472, MS 27474, MS 27475, M S27476, MS27477,
MS27478, MS27479, M S27480,M S27497, MS27499, MS27508 and MS27513.
Insert arrangements: See MIL-STD-1560.
For class E, compression nut in accordance with SAE-AS85049/27 shall be included.
Part or Identifyi ng Number (PI N) example:
MS27473 T 24 F 61 P A
MS number
Class
Shell size
Finish (color)
Insert arrangement number
Contact style (P or S)
Polarizing positions
No letter is required for normal.
Restrictions.
Class E is inactive for new design.
Class P is inactive for new design for the Air Force.
Finish F is not for Navy use. Finish F is inacti ve f or new design for the Air Force.
Amendment notations. The m argins of this specification are marked with vert i cal l i nes t o i ndi cat e
modifications generated by t hi s amendm ent. This was done as a convenience only and the Government
assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are
cautioned to evaluate the requirements of this document based on the enti re cont ent irrespective of the
marginal notations.
Source: http://assist.dla.mil -- Downloaded: 2021-04-29T16:44ZCheck the source to verify that this is the current version before use.