Surface Mount Series 766 Surface Mount Series 766 (Narrow Body) Narrow Body Design Series 766 requires 30% less board space than molded networks of the same power rating Packaged in tape and reel or slide packs Solid ceramic construction Meets EIA PDP 100 SOGN-0001 outline No internal dendrite growth Application specific circuits are available Compatible with all solder processes - Wave, IR reflow, Vapor phase reflow Recommended for bottom slide attachment Resistance Range: Standard: 10 Ohm to 1 Meg Ohm Resistance Tolerance: Bussed CTS Schematic 1 Standard: 2% or 0.5 Ohm (whichever is greater) Special: 0.25% or 0.3 Ohm (whichever is greater) Maximum Operating Voltage: 50V not to exceed rated power Temperature Coefficient: Standard: 100 Ohm to 1 Meg Ohm 100PPM/C typical 10 Ohm to 99 Ohm 200PPM/C typical Operating Temperature Range: -55C to +125C http://www.ctscorp.com/components/resistor_networks/766.htm (1 of 6)7/17/2005 8:49:27 PM Isolated CTS Schematic 3 Surface Mount Series 766 Dual Terminator CTS Schematic 5 Dielectric Strength: 100 VAC Power Rating (Total Network Power): 8 Pin 14 Pin 16 Pin @25 Deg. Cel. @70 Deg. Cel. .9 1.6w 1.8w .6 1.0w 1.2w R/2R Ladder CTS Schematic 7 Maximum Resistor Power: (Not to exceed total network power) Schematic 1 3 5 7 25 Deg. Cel. .12w .24w .12w .12w 70 Deg. Cel. .08w .16w .08w .08w http://www.ctscorp.com/components/resistor_networks/766.htm (2 of 6)7/17/2005 8:49:27 PM Surface Mount Series 766 NOTES: No. of Pins 8 14 16 "A" Dimmension mm inch mm inch mm inch End-Of-Life End-Of-Life 8.65 .10 .340 .004 9.90 .10 .390 + .004 .005 1. Lead Coplanarity 0.10 mm/0.004 in. max. 2. mm & inch DIMENSIONS ARE NOT EQUIVALENT 3. General Tolerances are: 0.25mm & .010 inch Recommended Land Pattern LEAD A COUNT mm in. mm 14P in. mm 16P in. 8P B C D 3.60 5.60 7.60 3.81 .140 .220 .300 .150 3.60 5.60 7.60 7.60 .140 .220 .300 .300 3.60 5.60 7.60 8.90 .140 .220 .300 .350 How to Order 766 Products Application specific custom networks are marked with either a customer part number or a non-descriptive CTS part number. Send documentation to a CTS Sales Office giving schematic, resistor values and tolerance, and other non-standard information. http://www.ctscorp.com/components/resistor_networks/766.htm (3 of 6)7/17/2005 8:49:27 PM Surface Mount Series 766 NOTE: No dashes or spaces to appear in part number. Example: 766143101GTR13 (Ohms) (EIA Code) (Ohms) (EIA Code) 0* 000X 3300 332 10 100 3900 392 12 120 5100 512 15 150 5600 562 18 180 6800 682 22 220 8200 822 27 270 10000 103 33 330 11000 113 39 390 12000 123 http://www.ctscorp.com/components/resistor_networks/766.htm (4 of 6)7/17/2005 8:49:27 PM Surface Mount Series 766 47 470 15000 153 51 510 18000 183 56 560 20000 203 68 680 22000 223 82 820 27000 273 100 101 33000 333 110 111 39000 393 120 121 47000 473 150 151 56000 563 180 181 68000 683 200 201 82000 823 220 221 100000 104 270 271 110000 114 330 331 120000 124 390 391 150000 154 470 471 180000 184 510 511 200000 204 560 561 220000 224 680 681 270000 274 820 821 330000 334 1000 102 390000 394 1100 112 470000 474 1200 122 560000 564 1500 152 680000 684 1800 182 820000 824 2000 202 1000000 105 http://www.ctscorp.com/components/resistor_networks/766.htm (5 of 6)7/17/2005 8:49:27 PM Surface Mount Series 766 2200 222 2700 272 *3 ohms max http://www.ctscorp.com/components/resistor_networks/766.htm (6 of 6)7/17/2005 8:49:27 PM