Illumination LUXEON UV FC Line Unique LED enabling limitless design freedom With FlipChip platform technology, the LUXEON UV FC Line is the smallest and highest power density (W/cm2) ultraviolet LED with FlipChip Technology in a Chip Scale Package (CSP). The LED can be reflowed onto a substrate with standard surface mount (SMT) equipment and process. LUXEON UV FC Line LEDs enable tighter beam control and high packing density of LEDs on a chip on board solution and completely eliminate wire bonds in the system. LUXEON UV FC Line is the ideal choice for cost sensitive applications to achieve high irradiance at high current density, maximizing W/$ by taking advantage of lowest thermal resistance of a CSP device. Features and Benefits Primary Applications Ultraviolet wavelength range of 380nm to 420nm for a range of options Specialty Lighting Micro sized CSP: 1.0mm2 package for design flexibility and packing density -- Analytical Instrumentation No wire bonds allows for direct attach and reflow -- Curing 5-sided emitter with batwing radiation pattern -- Medical Low thermal resistance for leading system level W/$ -- Security Maximum drive current of 1A/mm delivers superior flux for reduced LED count 2 RoHS COMPLIANT DS185 LUXEON UV FC Line Product Datasheet (c)2018 Lumileds Holding B.V. All rights reserved. Table of Contents General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Wavelength Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. i General Product Information Product Test Conditions LUXEON UV FC Line LEDs are tested and binned with a DC drive current of 500mA at a junction temperature, Tj, of 25C. Part Number Nomenclature Part numbers for LUXEON UV FC Line follow the convention below: L A F 3 - U B B B C 0 0 0 D D D D 1 Where: A - designates packing type (1=tape and reel) B B B - designates minimum peak wavelength (380=380nm, 390=390nm, 400=400nm, 410=410nm) C - designates product name and die size (1=LUXEON UV FC with 1mm2 die size) D D D D - designates radiometric power (0300=300mW, 0350=350mW, 0400=400mW, 0450=450mW, 1400=1400mW, 1600=1600mW, etc.) Therefore, the following part number is used for a LUXEON UV FC, with a 1mm2 die, minimum peak wavelength of 390nm and a radiometric power of 400mW on tape and reel: L 1 F 3 - U 3 9 0 1 0 0 0 0 4 0 0 1 Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON UV FC Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 2 Performance Characteristics Product Selection Guide Table 1. Product performance of LUXEON UV FC Line at 500mA and 1000mA, Tj=25C. PEAK Wavelength [1] (nm) 500mA 1000mA 410-420 750 1417 LxF3-U410100007001 400-410 750 1417 LxF3-U400100007001 390-400 750 1417 LxF3-U390100007001 380-390 450 850 LxF3-U380100004001 Typical Radiometric Power [2] (mW) Part Number Notes for Table 1: 1. Lumileds maintains a tolerance of 2nm for peak wavelength measurements. 2. Lumileds maintains a tolerance of 10% for radiometric power measurements. Optical Characteristics Table 2. Optical characteristics for LUXEON UV FC Line at 500mA, Tj=25C. Part Number TYPICAL SPECTRAL HALF-WIDTH (nm) TYPICAL TEMPERATURE COEFFICIENT OF PEAK WAVELENGTH (nm/C) Typical Total Included Angle [1] Typical Viewing Angle [2] LxF3-U410x000xxxx1 13.7 0.05 170 140 LxF3-U400x000xxxx1 12.0 0.05 170 140 LxF3-U390x000xxxx1 11.0 0.05 170 140 LxF3-U380x000xxxx1 9.0 0.05 170 140 Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is 1/2 of the peak value. Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON UV FC Line at 500mA, Tj=25C. Forward Voltage [1] (Vf) Typical Thermal Resistance--Junction to Solder Pad (C/W) Minimum Typical MAXIMUM Typical Temperature Coefficient of Forward Voltage [2] (mV/C) LxF3-U41010000xxxx1 2.8 3.1 3.4 -2.0 to -3.0 2.0 LxF3-U40010000xxxx1 2.8 3.1 3.4 -2.0 to -3.0 2.0 LxF3-U39010000xxxx1 2.8 3.1 3.4 -2.0 to -3.0 2.0 LxF3-U38010000xxxx1 2.8 3.2 3.4 -2.0 to -3.0 2.0 Part Number Notes for Table 3: 1. Lumileds maintains a tolerance of 0.05V on forward voltage measurements. 2. Measured between 25C and 85C. DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 3 Absolute Maximum Ratings Table 4. Absolute maximum ratings for LUXEON UV FC Line. Parameter Maximum Performance DC Forward Current 1000mA [1,2] 1300mA Peak Pulsed Forward Current [1,3] LED Junction Temperature [1] (DC & Pulse) 120C ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 0B Operating Case Temperature [1] -40C to 120C LED Storage Temperature -40C to 135C Soldering Temperature 300 3C [4] Allowable Reflow Cycles 3 Reverse Voltage (Vreverse) LUXEON UV FC Line LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. 2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called "ripple," are acceptable if the following conditions are met: - The frequency of the ripple current is 100Hz or higher - The average current for each cycle does not exceed the maximum allowable DC forward current - The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current 3. At 10% duty cycle with pulse width of 10ms. 4. 300C for AuSn (gold-tin) solder system, see AB116 for more details; 260C for non-AuSn lead-free solder system per JEDEC J-STD-020E classification. Characteristic Curves Spectral Power Distribution Characteristics Figure 1. Typical normalized radiant power vs. wavelength for LUXEON UV FC Line at 500mA, Tj=25C. DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 4 Light Output Characteristics Figure 2. Typical normalized radiant power vs. junction temperature for LUXEON UV FC Line at 500mA. Figure 3. Typical normalized radiant power vs. forward current for LUXEON UV FC Line at Tj=25C. DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 5 Forward Current Characteristics Figure 4. Typical forward current vs. forward voltage for LUXEON UV FC Line at Tj=25C. Figure 5. Typical forward voltage shift vs. junction temperature for LUXEON UV FC Line at Tj=25C. DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 6 Wavelength Shift Figure 6. Typical peak wavelength shift vs. forward current for LUXEON UV FC Line at Tj=25C. Figure 7. Typical peak wavelength vs. junction temperature for LUXEON UV FC Line at 500mA. DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 7 Radiation Pattern Characteristics Figure 8. Typical radiation pattern for LUXEON UV FC Line at 500mA, Tj=25C. Figure 9. Typical polar radiation pattern for LUXEON UV FC Line at 500mA, Tj=25C. DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 8 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. LUXEON UV FC Line LEDs are labeled using a 4-digit alphanumeric CAT code following the format below: A B c D A - designates radiometric power bin (example: B=300 to 350mW, D=400 to 450mW, F=500 to 550mW) B c - designates peak wavelength bin (example: Ax=380 to 385nm, Cx=390 to 395nm, Ex=400 to 405nm) D - designates forward voltage bin (example: 8=2.8 to 2.9V, 0=3.0 to 3.1V) Therefore, a LUXEON UV FC LED with a radiometric power range of 400 to 450mW, peak wavelength range of 400 to 405nm and a forward voltage range of 3.0 to 3.1V has the following CAT code: D E x 0 DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 9 Radiometric Power Bins Table 5 lists the standard radiometric power bins for LUXEON UV FC Line emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Radiometric power bin definitions for LUXEON UV FC Line. Radiometric Power [1] (mW) Bin Minimum Maximum B 300 350 C 350 400 D 400 450 E 450 500 F 500 550 G 550 600 H 600 650 I 650 700 J 700 750 K 750 800 L 800 850 M 850 900 A1 400 600 B1 600 800 C1 800 1000 D1 1000 1200 E1 1200 1400 F1 1400 1600 G1 1600 1800 Notes for Table 5: 1. Lumileds maintains a tolerance of 10% on radiometric power measurements. Peak Wavelength Bins Table 6. Peak wavelength definitions for LUXEON UV FC Line. Bin Peak Wavelength [1] (nm) Minimum Maximum Ax 380 385 Bx 385 390 Cx 390 395 Dx 395 400 Ex 400 405 Fx 405 410 Gx 410 415 Hx 415 420 Notes for Table 6: 1. Lumileds maintains a tolerance of 2nm on peak wavelength measurements. DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 10 Forward Voltage Bins Table 7. Forward voltage bin definitions for LUXEON UV FC Line. Forward Voltage [1] (V) Bin Minimum Maximum 7 2.7 2.8 8 2.8 2.9 9 2.9 3.0 0 3.0 3.1 1 3.1 3.2 2 3.2 3.3 3 3.3 3.4 4 3.4 3.5 T 2.8 3.0 V 3.0 3.2 W 3.2 3.4 X 3.4 3.6 Notes for Table 7: 1. Lumileds maintains a tolerance of 0.05V on forward voltage measurements. Mechanical Dimensions ANODE Figure 10. Mechanical dimensions for LUXEON UV FC Line. Notes for Figure 10: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 11 Reflow Soldering Guidelines tp Tp Critical Zone TL to Tp Ramp-up TL Temperature tL Tsmax Tsmin Ramp-down ts Preheat Area 25 Time 25C to Peak JEDEC J-STD-020D Time Figure 11. Visualization of the acceptable reflow temperature profile as specified in Table 8. Table 8. Reflow profile characteristics for LUXEON UV FC Line (non-AuSn solder system) [1]. PROFILE FEATURE Lead-Free Assembly Preheat Minimum Temperature (Tsmin) 150C Preheat Maximum Temperature (Tsmax) 200C Preheat Time (tsmin to tsmax) 60 to 120 seconds Ramp-Up Rate (TL to Tp) 3C / second maximum Liquidus Temperature (TL) 217C Time Maintained Above Temperature TL (tL) 60 to 150 seconds Peak / Classification Temperature (Tp) 260C Time Within 5C of Actual Temperature (tp) 20 to 40 seconds Ramp-Down Rate (Tp to TL) 6C / second maximum Time 25C to Peak Temperature 8 minutes maximum Notes for Table 8: 1. Characteristics are for non-AuSn lead-free solder system only (for AuSn (gold-tin) solder system, see AB116 for more details). JEDEC Moisture Sensitivity Table 9. Moisture sensitivity levels for LUXEON UV FC Line. level 1 Floor Life Soak Requirements Standard TIme Conditions Time Conditions Unlimited 30C / 85% RH 168 Hours +5 / -0 85C / 85% RH DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 12 Solder Pad Design Figure 12. Recommended PCB solder pad layout for LUXEON UV FC Line. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 13 Packaging Information Pocket Tape Dimensions Figure 13. Pocket tape dimensions for LUXEON UV FC Line. Reel Dimensions Figure 14. Reel dimensions for LUXEON UV FC Line. Notes for Figures 13 and 14: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS185 LUXEON UV FC Line Product Datasheet 20180604 (c)2018 Lumileds Holding B.V. All rights reserved. 14 About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world safer, better and more beautiful--with light. To learn more about our lighting solutions, visit lumileds.com. (c)2018 Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS185 LUXEON UV FC Line Product Datasheet 20180604 Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided "as is," and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents.