AWSZT-CW
2.5 x 2.0mm INDUSTRIAL GRADE CERAMIC RESONATOR
ELECTRICAL CHARACTERISTICS:
FEATURES: APPLICATIONS:
TEST CONDITION AND TEST CIRCUIT:
OPTIONS & PART IDENTIFICATION:
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 08.12.14
Visit www.abracon.com for Terms & Conditions of Sale
• Remote controls, Microprocessor clocks, Mobile
phones, DVD & CD-Roms, Electri
c appliances
• Consumer electronics
AWSZT-CW
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
AWSZT – XX.XX CW -
Parameters
Minimum
Typical
Maximum
Units
Notes
Frequency Range 20.00 60.00 MHz
Resonant Impedance (Ro)
60
Ω
20.00 MHz – 25.99 MHz
50 26.00 MHz – 35.00 MHz
50
35.01 MHz – 60.00 MHz
Load Capacitance for Test Circuit
(C1=C2)
10
–
20%
10
10 + 20%
pF
20.00 MHz
–
25.99 MHz
5 – 20% 5 5 + 20% 26.00 MHz – 35.00 MHz
5 – 20% 5 5 + 20% 35.01 MHz – 60.00 MHz
Frequency Tolerance @25 ºC
-0.5
0.5
%
Frequency Stability @ -25ºC to +85ºC
-0.2
0.2
%
Withstanding Voltage
50 V DC , 1 min
Rating Voltage (1) D.C.Voltage 6 V
(2) A.C. Voltage 15 Vp-p.
Insulation Resistance
500
MΩ
10V, 1min
Operation Temperature -25 85 ºC
Storage Temperature
-55
85
ºC
Aging Rate (Fosc) (10 years) -0.2 0.2 %
Packaging
T: 3000pcs/Reel
Blank: Bulk
Frequency
Frequency in MHz
Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition
(Temp: 25±3°C, Humidity: 65±10% R.H.) is regulated to measure
X: Cera mic Re sonator
C1=C2: 10pF ±20% ( 20.00MHz~25.99MHz)
5pF ±20% ( 26.00MHz~35.00MHz)
5pF ±20% ( 35.01MHz~60.00MHz)
2.5 x 2.0 x 1.0 mm
RoHS/RoHS II compliant
Pb in ceramic, exemption (7c-I)
Moisture Sensitivity Level (MSL) – This product is not Moisture Sensitive - MSL = 1
• Built-in load capacitors
• IR reflow capable
• Low resonant impedance
AWSZT-CW
OUTLINE DRAWING:
REFLOW PROFILE:
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
AWSZT-CW
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Recommended Land Pattern
Dimension: mm
AWSZT-CW Series
2.5X2.0mm INDUSTRIAL GRADE
CERAMIC RESONATOR
Date of Issue: Aug.1st , 2012
2.5 x 2.0 x 1.0mm
Page (6) of (12)
Abracon Drawing # 452749
Revision #: C
5.0 Outline Dimensions
5.1 Recommended Land Pattern
Dimension: mm
2.5 x 2.0mm INDUSTRIAL GRADE CERAMIC RESONATOR
Revised: 08.12.14
2.5 x 2.0 x 1.0 mm
RoHS/RoHS II compliant
Pb in ceramic, exemption (7c-I)
$:6=7&:6HULHV
;PP,1'8675,$/*5$'(
&(5$0,&5(621$725
'DWHRI,VVXH$XJXVWWK [[PP
Page (6) of (12)$EUDFRQ'UDZLQJ 5HYLVLRQ(
2XWOLQH'LPHQVLRQV
5HFRPPHQGHG/DQG3DWWHUQ
'LPHQVLRQPP
PD[
AWSZT-CW
TAPE & REEL:
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
AWSZT-CW
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Dimension: mm
T: tape and reel (3,000pcs/reel)
ФA
ФB
W
T
Carrier tape size
180±3
60 min.
8.4 min
12.4 max
8
2.5 x 2.0mm INDUSTRIAL GRADE CERAMIC RESONATOR
Revised: 08.12.14
2.5 x 2.0 x 1.0 mm
RoHS/RoHS II compliant
Pb in ceramic, exemption (7c-I)
Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If
the product will not be used within 1 year, it is recommended that the product be re-sealed in airtight
packaging according to MSL 1 requirements to maintain solderability.
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as
this will cause damage to the component.
(2) This component is not hermetically sealed. Do not clean or wash the component.
(3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering.
(4) Do not expose the component to open flame.
(5) This specification applies to the functionality of the component as a single unit.
(6) Storage Conditions: If the product is to be stored for a period greater than Six Months after the Delivery Date, it is recommended that
customers confirm the solderability and characteristics for the product prior to use.
(7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-
reliability, life dependant applications. Contact Abracon Corporation prior to using this product when in doubt.
CAUTION:
