Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 12.04.2004
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Photoelectric sensor
emitter
QS186EBQ8
operational voltage 10..0.30 VDC
LED visible from all sides
M12 x 1 connector
Wiring diagram
Opposed mode sensors consist of a sepa-
rate emitter and receiver. These are instal-
led directly opposite each other so that the
light from the emitter is aimed directly at the
receiver. When an object interrupts or wea-
kens the light beam, the sensor switches.
Opposed mode sensors are the most relia-
ble photoelectric sensors for detection of
opaque targets. An excellent contrast bet-
ween light and dark conditions and an ex-
tremly high excess gain are typical of this
sensing mode, thus allowing operation
over larger distances and under difficult
conditions.
Excess gain curve
Excess gain in relation to the distance (type
6EB/RB)
+
BN (1)
BU (3)
1
10
100
1 10 100 m
0,1
1000
...6EB
...6RB
...6E
...6R
Type QS186EBQ8
Ident-No. 3066448
Operating mode Opposed mode (emitter)
Type of light IR
Wave length 940 nm
Max. sensing range [m] 0... 3 m
Operating temperature -20 ...+ 70 °C
Rated operational voltage (DC) UB10... 30 VDC
Rated operational current (DC) Ie 100 mA
No-load current I0 32 mA
Short-circuit protection yes, cyclic
Reverse polarity protection yes
Housing style rectangular; QS18
Dimensions 27,7 x 15 x 35 mm
Housing material plastic, ABS
Lens plastic, acrylic
Wiring connector, M12 x 1
Degree of protection IP67
Supply voltage indication LED green
M12 x 1
49
17,1
15
35
31
24,1
ø 3,3
M18 x 1
LED YE
LED GN
24/8
Pot.