2.8–9.9 GHz FREQUENCY MULTIPLEXER
MODEL: 136466
FEATURES
• High reliability, spaceborne application
• Broadband RF coverage.......... 2.8–9.9 GHz
• RF gain...................................... 23 dB nominal
• Channel-to-channel isolation.. 45 dB minimum
• Input/output VSWR................... 1.5:1 typ., 1.8:1 maximum
• Noise figure ..............................
3.5 dB typ., 4.5 dB maximum
• Low power ................................ 325 mA (5 V) typical
• Lightweight ............................... 520 grams typical
MITEQ’s model 136466 broadband-three output frequency multiplexer precedes the second IF down conversion
stage in a low earth orbit-based millimeter-wave radiometer. In combination with the MITEQ second IF
downconverter, the system provides maximally flat frequency response over the bands of interest, high linearity of
output power to input power, and high isolation between the frequency bands of interest as well as from other
undesirable signals. In addition, this high reliability, spaceborne integrated assembly is optimized for small size, low
power consumption, lightweight, and excellent thermal stability of operation.
ELECTRICAL SPECIFICATIONS
RF INPUT PARAMETERS CONDITION UNITS MIN. TYP. MAX.
Frequency range GHz 2.8 9.9
VSWR Ratio 1.5:1 1.8:1
RF OUTPUT PARAMETERS CONDITION UNITS MIN. TYP. MAX.
Number of RF output channels 3
Channel 2 dB bandwidth MHz 1300
Channel 20 dB rejection bandwidth MHz 2300
Channel center frequencies GHz
3.9449, 5.7085, 9.1168
Nominal gain dB 23
Output power (1 dB compression) dBm -8 -5
Noise figure dB 3.5 4.5
Isolation between output channels dB 45
VSWR Over 1300 MHz passband Ratio 1.5:1 1.8:1
VOLTAGE TO FREQUENCY
OUTPUT PARAMETERS CONDITION UNITS MIN. TYP. MAX.
Number of output channels 4
Channel 3 dB bandwidth MHz 450
Channel 30 dB rejection bandwidth MHz 1000
Channel center frequencies GHz 3.06, 4.76, 7.26, 7.86
Output full scale frequency kHz 90
OTHER PARAMETERS CONDITION UNITS MIN. TYP. MAX.
Digital gain control 4 BIT Binary, TTL; BIT 5 = OFF state dB 0 7.5
Gain control step size dB 0.5
Connectors, RF SMA
Connectors, DC control, 21-pin, micro D
voltage-frequency outputs
Supply voltage Volts ±5
DC power consumption for each At 5 V Supply mA 325
downconverter At -5 V Supply mA 2.5
Weight Grams 520