MAXQ30-FPBM-TFP3L TFP3 Flash Programmer Board Multipurpose Flash Programming for Energy SoCs Overview Description The TFP3 (The Flash Programmer 3) is a multipurpose programmer used to perform flash utility operations on Maxim energy metering SoCs. The TFP3 has three operating modes: stand alone, host, and ATE. * TFP3-80515: Flash programmer for 8051-based metering devices, with security * TFP3L-MAXQ30: Flash programmer for ZONTM family metering devices (MAXQ(R)based), no security * TFP3Q-MAXQ30: Flash programmer for ZON family metering devices (MAXQbased), with security The Flash Programmer (Model TFP3) User's Guide The Flash Programmer (Model TFP3) Quick Start Guide Key Features * * * * * * * * * * * Programming of the TFP3 Internal Flash Memory Pushbutton Programming of the DUT Through CC51 or JTAG Interface Host Application-Based Programming of DUT Through CC51 or JTAG Interface ATE-Based Programming of DUT Through CC51 or JTAG Interface TFP3 Diagnostic Information Access Secure Dumping of the DUT Code Image to the Host TFP3 GUI Operation Generation and Loading of the Package File TFP3 Parameter Preservation Downloading of the DUT hex file to the TFP3 TFP3 Firmware Upgrade Using In-Application Programming http://www.maximintegrated.com/en/products/industries/metering-energy-measurement/M... 7/30/2015