DS9093x
020998 2/2
The DS9093N angled fob is an alternate way to mount
an iButton for applications that require only momentary
contact. Due to the different mounting technique, the
DS9093N can be used with the F5 MicroCan only. The
iButton is inserted into this fob by press-fitting. For per-
manent mount, the iButton can be locked by a
DS9093RA Lock Ring.
The DS9093A is very similar to the DS9093N. It has
about the same size as the DS9093N and can be used
with the F5 MicroCan only. The iButton is inserted by
press–fitting the flange of the MicroCan into the cavity of
the fob. In contrast to the DS9093N, no additional parts
are needed for permanent mounting. The DS9093A is
available in black, blue, green, red and yellow.
THROUGH–MOUNT FOR CONTAINERS
DS9093P/S
A
B
5.3
3.0 MINIMUM REQUIRED
CLEARANCE B
A
a)
SECTION A–A
46.9 4.4
2.0
5.2 DIA.
35.0
5.0
3.8 REF.
NOTE: PIN IS REPLACED
WITH A THRU HOLE
ON DS9093S b)
30.9
2.0
SECTION B–B
c)
NOTE: PIN IS REPLACED
WITH A THRU HOLE
ON DS9093S
DIA.
iButton
The DS9093S and DS9093P allows the user to perma-
nently attach an iButton to an object with one or two
screws, rivets, etc. The plastic plate is designed with an
inset that accommodates the flange of the F5
package and allows for flush mounting. A protective wall
is provided along the sides of the plate to reduce inci-
dental damage to the iButton.
The DS9093RA Lock Ring is a stainless steel fastener
which provides an inexpensive method for firmly attach-
ing an iButton to any item with a pre–punched hole. The
iButton is inserted through the hole and is restrained by
the flange on the iButton. The DS9093RA Lock Ring is
crimped onto the portion of the iButton which protrudes
through the hole.
The optional DS9093RB Flange Enlargement is a thin
stainless steel washer that provides additional surface
area to improve retention of the iButton in materials that
are very thin or flexible. The DS9093RB is formed with a
slight dome to improve the gripping force exerted onto
the pre–punched material. The domed side of the
washer should face the flange of the iButton, the flat side
should face the material.
16.23 mm
0.30 mm
16.51 mm
0.51 mm
DS9093RB
DS9093RA
19.05 mm
19.05 mm
DS9093RA AND DS9093RB APPLICATION
DS9093RA FLANGE OF