OSLON SSL -- 80 Ceramic package - 80 radiation pattern RoHS Lead (Pb) Free Product - RoHS Compliant LUW CQ7P / Preliminary Data * SMD * 119 lm 276 lm 350 mA 1 A * LED * x = 0.31y = 0.32 CIE 1931 * 6500 K * 80 * ThinGaN * 106 lm/W 350 mA * * * JEDEC 2 * 8 mm 600/ 180 mm * ESD 8 kV JESD22A114-D * 13 * 13 Features * package: SMD ceramic package with silicon resin with lens * typical Luminous Flux: 119 lm at 350 mA and up to 276 lm at 1 A * feature of the device: small size high-flux LED for slim designs * color coordinates: x = 0.31, y = 0.32 acc. to CIE 1931 (white) * typ. color temperature: 6500 K * viewing angle: 80 * technology: ThinGaN * optical efficiency: 106 lm/W at 350 mA * grouping parameter: luminous flux, color coordinates, forward voltage * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8-mm tape with 600/reel, o180 mm * ESD-withstand voltage: up to 8 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: details see page 13 * Humidity Robustness: details see page 13 * LED * * * Applications * Residential retrofits & fixtures * Accent lights * decorative and entertainment lighting * marker lights (e.g. steps, exit ways, etc.) 2010-10-27 1 / Preliminary Data Ordering Information Type LUW CQ7P 20 Luminous color temperature Flux1) page 20 1) 20 2) Luminous Intensity2) page 20 IF = 350 mA V(lm) IF = 350 mA IV (cd) Ordering Code LUW CQ7P-KULQ-5E8G-1 LUW CQ7P-LPLR-5E8G-1 6000K 104.2 ... 130.0 112.0 ... 140.0 66/(typ.) 71/(typ.) / on request / on request LUW CQ7P-KULQ-5D8F-1 LUW CQ7P-LPLR-5D8F-1 6000K 104.2 ... 130.0 112.0 ... 140.0 66/(typ.) 71/(typ.) / on request / on request LUW CQ7P-KULQ-5C8E-1 LUW CQ7P-LPLR-5C8E-1 6000K 104.2 ... 130.0 112.0 ... 140.0 66/(typ.) 71/(typ.) / on request / on request 2010-10-27 2 / Preliminary Data Note: LUW CQ7P 8 LUW CQ7P-KTLP-5E8G-1 KTKU LP LUW CQ7PKTLP-5E8G-1 5E 8G 8 LED LUW CQ7PKTLP-5E8G-1 3 4 5 8 Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 8 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g.LUW CQ7P-KTLP-5E8G-1 means that only one group KT, KU or LP will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where chromaticity coordinate groups are measured and binned, single chromaticity coordinate groups will be shipped on any one reel. E.g. LUW CQ7P-KTLP-5E8G-1 means that only 1 chromaticity coordinate group -5E to -8G will be shippable (see page 8 for explanation). In order to ensure availability, single chromaticity coordinate groups will not be orderable. In a similar manner for LED, where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any one reel. E.g. LUW CQ7P-KTLP-5E8G-1 means that only 1 forward voltage group -3, -4 or -5 will be shippable. In order to ensure availability, single forward voltage groups will not be orderable(see page 8 for explanation). 2010-10-27 3 / Preliminary Data LUW CQ7P Maximum Ratings Parameter Symbol Value Unit Operating temperature range Top - 40 ... + 110 C Storage temperature range Tstg - 40 ... + 110 C Junction temperature Tj 125 C 100 1000 mA mA Forward current (TS=25C) / (min.) IF / (max.) IF Surge current t 50 ms, D = 0.016, TS = 25C IFM 2000 mA Reverse voltage (TS=25C) VR V 2010-10-27 not designed for reverse operation 4 / Preliminary Data LUW CQ7P Characteristics (TS = 25 C) Parameter CIE 1931 x 20 3) / (typ.) Symbol Value Unit x 0. 31 - y 0. 32 - 3) page 20 Chromaticity coordinate x acc. to CIE 1931 IF = 350 mA CIE 1931 y 20 3) / (typ.) Chromaticity coordinate y acc. to CIE 19313) page 20 IF = 350 mA 50% IV Viewing angle at 50 % V 20 4) / (typ.) 2 deg. / (min.) Forward voltage4) Page 20 / (typ.) IF = 350 mA /(max.) VF VF VF /(max.) IR Reverse current 80 2.75 3.2 3.75 V V V A not designed for reverse operation - Thermal resistance / (typ.) Junction/solder point Rth JS /(max.) Rth JS Rth Rth (max) is based on statistic values 2010-10-27 5 7 9.4* K/W K/W / Preliminary Data LUW CQ7P 20 3) 3) page 20 Chromaticity Coordinate Groups Group 4C 5C 6C 7C 8C 2010-10-27 Group Cx Cy 0.322 0.324 0.311 0.322 0.332 0.316 0.329 0.338 0.313 0.310 0.329 0.331 0.307 0.311 0.322 0.332 0.306 0.318 0.321 0.339 0.311 0.323 0.329 0.346 0.312 0.316 0.329 0.338 0.306 0.318 0.321 0.339 0.304 0.324 0.321 0.346 0.310 0.330 0.329 0.354 0.311 0.323 0.329 0.346 0.304 0.324 0.321 0.346 0.303 0.330 0.320 0.354 0.309 0.336 0.329 0.362 0.310 0.330 0.329 0.354 0.303 0.330 0.329 0.331 0.302 0.337 0.329 0.338 0.308 0.343 0.337 0.345 0.309 0.336 0.337 0.337 Cx Cy 0.308 0.305 0.307 0.312 5F 6F 7F 8F 5G 6 / Preliminary Data Group 4D 5D 6D 7D 8D 4E 5E 6E 7E 8E 2010-10-27 Cx Cy 0.313 0.310 0.312 0.316 0.317 0.321 0.318 0.314 0.312 0.316 0.311 0.323 0.316 0.328 0.317 0.321 0.311 0.323 0.310 0.330 0.315 0.335 0.316 0.328 0.310 0.330 0.309 0.336 0.315 0.342 0.315 0.335 0.309 0.336 0.308 0.343 0.314 0.349 0.315 0.342 0.318 0.314 0.317 0.321 0.322 0.326 0.323 0.319 0.317 0.321 0.316 0.328 0.322 0.333 0.322 0.326 0.316 0.328 0.315 0.335 0.321 0.341 0.322 0.333 0.315 0.335 0.315 0.342 0.321 0.348 0.321 0.341 0.315 0.342 0.314 0.349 0.320 0.355 0.321 0.348 LUW CQ7P Group 6G 7G 8G 7 Cx Cy 0.329 0.338 0.329 0.346 0.337 0.353 0.337 0.345 0.329 0.346 0.329 0.354 0.338 0.362 0.337 0.353 0.329 0.354 0.329 0.362 0.338 0.370 0.338 0.362 / Preliminary Data LUW CQ7P 18 4) Forward Voltage Groups4) page 18 Group Unit Forward voltage 3 /min. 2.75 /max. 3.0 V 4 3.0 3.25 V 5 3.25 3.5 V Brightness Groups Brightness Group KU LP LQ LR 20 1) Luminous Flux1) page 20 V (lm) 104.2 ... 112.0 112.0 ... 121.0 121.0 ... 130.0 130.0 ... 140.0 20 2) Luminous Intensity2) page 20 IV (cd) 60.0 / (typ.) 65.0 / (typ.) 70.0 / (typ.) 76.0 / (typ.) Note: The standard shipping format for serial types includes a family group of only a few individual brightness groups. Individual brightness groups cannot be ordered. Group Name on Label KU-5E Example: KU-5E Brightness Group Chromaticity Coordinate Group KU 5E / Note: No packing unit / tape ever contain more than one brightness group. 2010-10-27 8 / Preliminary Data LUW CQ7P 20 2) Relative Spectral Emission2) page 20 V() = / Standard eye response curve rel = f (); TS = 25C; IF = 350 mA 20 2) Radiation Characteristic2) page 20 Irel = f (); TS = 25C 2010-10-27 9 / Preliminary Data LUW CQ7P 20 2) Forward Current2) page 20 IF = f (VF); TS = 25 C 20 2) Relative Luminous Flux2) page 20 / (350 mA) = f (IF); TS = 25 C V V 20 2) Chromaticity Coordinate Shift2) page 20 x, y = f (IF); TS = 25 C 2010-10-27 10 / Preliminary Data LUW CQ7P 20 2) Relative Forward Voltage2) page 20 VF = VF - VF(25 C) = f (Tj); IF = 350 mA 20 2) Relative Luminous Flux2) page 20 V/V(25C) = f (Tj); IF = 350 mA 20 2) Chromaticity Coordinate Shift2) page 20 x, y = f (Tj); IF = 350 mA 2010-10-27 11 / Preliminary Data LUW CQ7P Max. Permissible Forward Current IF = f (TS) IF = f (tp) Permissible Pulse Handling Capability D = TS = 25C IF = f (tp) Permissible Pulse Handling Capability D = TS = 85C Duty cycle D = parameter, TS = 25 C Duty cycle D = parameter, TS = 85 C 2010-10-27 12 / Preliminary Data LUW CQ7P 20 5) Package Outlines5) page 20 Note: LED LED ESD LED is protected by ESD device which is connected in parallel to LED-Chip. Note: Package not suitable for ultra sonic cleaning .: EN 60068-2-60 4 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Cathode mark: mark / Approx. weight: 25 mg / Humidity Robustness / Test (WHTOL) / Wet High Temperature Operating Life Test (WHTOL) / Conditions / Duration / Failure criteria 85C/85%RH, IF = 50 mA >500 h -PhiV > 30% - / catastrophic failure Note: Manufacturer disclaims all liability for applications in high humidity levels as it may appear in outdoor applications 2010-10-27 13 / Preliminary Data LUW CQ7P / 20 5) Method of Taping / Polarity and Orientation5) page 20 2010-10-27 14 600/o180 mm Packing unit 600/reel, o180 mm / Preliminary Data LUW CQ7P 20 5) Recommended Solder Pad5) page 20 2010-10-27 Reflow Soldering 15 / Preliminary Data LUW CQ7P JEDEC 2 Preconditioning acc. to JEDEC Level 2 J-STD-020D.01 (acc. to J-STD-020D.01) Soldering Conditions Reflow Soldering Profile for lead free soldering / Profile Feature / Pb-Free (SnAgCu) Assembly / Recommendation / Max. Ratings / Ramp-up Rate to Preheat*) 25C 150C / 25C to 150C 2C/ / 2C/sec 3C/ / 3C/sec TS TS ts / Time ts from TSmin to TSmax 150C 200C / 150C to 200C 100 / 100 s 60 120 / Ramp-up Rate to Peak*) 180C TP / 180C to TP 2C/ / 2C/sec min. 60 sec max. 120 sec 3C/ / 3C/sec 217C TL / Liquidus Temperature TL TL tL / Time tL above TL 80 / 80 sec 100 / max. 100 sec TP / Peak Temperature TP 245C 260C / max. 260C TP - 5K 5C tP / Time tP within 5C of the specified peak temperature TP - 5K 20 / 20 sec 10 30 / min. 10 sec max. 30 sec / Ramp-down Rate* 3K/ / 3K/sec 6K/ / 6K/sec maximum TP 100C / TP to 100C 25C / Time 25C to Peak temperature 8 * T/tt 5 T All temperatures refer to the center of the package, measured on the top of the component * slope calculation T/t: t max. 5 sec; fulfillment for the whole T-range 2010-10-27 16 / Preliminary Data LUW CQ7P ---- (BPL) Barcode-Product-Label (BPL) Tape and Reel mm/ Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 3.5 0.05 2 0.05 1.5 0.1 1.75 0.1 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 0.004) (0.069 0.004) (0.138 0.002) mm/ Reel dimensions in mm (inch) A 180 (7) 2010-10-27 W Nmin W1 W2 max 8 (0.315) 60 (2.362) 8.4 2 (0.331 0.079) 14.4 (0.567) 17 / Preliminary Data LUW CQ7P Dry Packing Process and Materials / Moisture-sensitive label or print / Barcode label / Humidity indicator / Barcodelabel / Desiccant """" JEDEC Note: Moisture-sensitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Transportation Packing and Materials / Barcode label / Barcode label / Packing / Sealing label mm/ Dimensions of transportation box in mm (inch) / Width / length / height 200 5 (7,874 0,1968) 2010-10-27 200 5 (7,874 0,1968) 18 30 5 (1,1811 0,1968) / Preliminary Data /Revision History: / Previous Version: LUW CQ7P 2010-10-27 - Page Subjects (major changes since last revision) Date of change / all / Preliminary data sheet created 2010-10-27 / Patent List / Patent No. US 6 066 861 US 6 277 301 US 6 245 259 2010-10-27 19 / Preliminary Data LUW CQ7P IEC 60825 LED IEC 62471:2006 "" CIE LED "" 10000 Due to the cancellation of the LED from IEC 60825, the evaluation of eye safety occurs according to the standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LEDs specified in this data sheet fall into the "moderate" group (relating to devices in the visible spectrum with an exposure time of 0.25 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. 20 6) 20 7) Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components6) page 20 may only be used in life-support devices or systems7) page 20 with the express written approval of OSRAM OS. 2010-10-27 20 / Preliminary Data LUW CQ7P Remarks: Brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11% (acc. to GUM with a coverage factor of k = 3). 1) 25 ms +/-8 +/-11 GUM k = 3 2) LED 3) 25 ms +/-0.005 +/-0.01 GUM k = 3 4) 8 ms +/-0,05 V +/-0.1 V GUM k = 3 5) mm 6) 7) (a) (b) / 1) 4 D93055 www.osram-os.com (c) Published by OSRAM Opto Semiconductors GmbH Leibnizstrasse 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2010-10-27 21 2) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) Chromaticity coordinates are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,005 and an expanded uncertainty of +/- 0,01 (acc. to GUM with a coverage factor of k = 3). 4) The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3). 5) Dimensions are specified as follows: mm (inch). 6) A critical component is a component used in a lifesupport device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 7) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.