
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6620 • e-mail: sales@wj.com • Web site: www.wj.com
November 2003
HMJ9
High Dynamic Range FET Mixer
The Communications Ed •
Specifications
Parameters Units Minimum Typical Maximum Condition
Frequency Range: MHz
RF MHz 860 900
LO MHz 1140 1160
IF MHz 250 280
SSB Conversion Loss dB 8.5
Noise Figure dB 11
Isolation:
LO-RF dB 18 20
LO-IF dB 40 50
IF-RF dB 25
IIP3 dBm 32 35 RF = 900 MHz (0dBm)
Return Loss:
RF Port dB 10
LO Port dB 9
IF Port dB 15
Input P1dB dBm 23
LO Drive Level dBm 17
DC Current at +3V Bias mA 23 35
Test conditions unless otherwise noted stated: RF = 900 MHz (-10 dBm), LO = 830 MHz (17 dBm), IF = 70 MHz and 25°C.
Absolute Maximum Rating Ordering Information
Parameters Rating Part No. Description
Operating Case Temperature -40 to +85°C HMJ9 High Dynamic Range FET Mixer
Storage Temperature -65 to +100°C (Available in Tape & Reel)
Maximum Input Power 25 dBm HMJ9 – PCB Fully Assembled Application
Circuit
1. Operation of this device above any of these parameters may cause permanent damage.
2. Total sum of LO port and RF port power should not exceed 25 dBm.
The Communications Ed
e TM
Product Features
• +35 dBm IIP3
• No External Matching
Elements Required
• RF 860-900 MHz
• LO 1140-1160 MHz
• IF 250-280 MHz
• +17 dBm Drive Level
• +3V Bias (23 mA)
• Low Cost Surface
Mount J-Lead Package
Product Description
The HMJ9 is a high dynamic range,
GaAs FET mixer. As an upconverter,
this active FET mixer realizes a typical
third order intercept point of +35 dBm at
an LO drive level of +17 dBm. The
HMJ9 comes in a low cost, J-lea
ackage. Typical applications include
frequency up/down conversion fo
receivers and transmitters used in cellula
communications systems.
Functional Diagram