Power TOPLED(R) With Lens Enhanced Thin Film LED Lead (Pb) Free Product - RoHS Compliant LA E63F Vorlaufige Daten / Preliminary Data Besondere Merkmale Features * Gehausetyp: weies P-LCC-4 Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: fokussierte Abstrahlung in SMT-Technologie; hohe Helligkeit in Achsrichtung * Wellenlange: 617 nm (amber) * Abstrahlwinkel: 30 * Technologie: InGaAlP * optischer Wirkungsgrad: 43 lm/W * Gruppierungsparameter: Lichtstarke, Durchflussspannung, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 12 mm Gurt mit 2000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-B * package: white P-LCC-4 package, colorless clear resin * feature of the device: focussed radiation in SMT technology; high brightness in beam direction * wavelength: 617 nm (amber) * viewing angle: 30 * technology: InGaAlP * optical efficiency: 43 lm/W * grouping parameter: luminous intensity, forward voltage, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 12 mm tape with 2000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-B Anwendungen Applications * Ampelanwendung * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung) * Innen- und Auenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung und Bremslichter) * Ersatz von Kleinst-Gluhlampen * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Signal- und Symbolleuchten * traffic lights * backlighting (LCD, switches, keys, displays, illuminated advertising) * interior and exterior automotive lighting (e.g. dashboard backlighting and brake lights) * substitution of micro incandescent lamps * marker lights (e.g. steps, exit ways, etc.) * signal and symbol luminaire 2004-09-16 1 LA E63F Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 16 Lichtstrom2) Seite 16 Bestellnummer Type Color of Emission Luminous Intensity1) page 16 Luminous Flux2) page 16 Ordering Code IF = 50 mA EV (lux) IF = 50 mA V (mlm) 7100 ...14000 5000(typ.) LA E63F-EAFA-24-1 amber Q65110A1845 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LA E63F-EAFA-24-1 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen EA, EB oder FA enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LA E63F-EAFA-24-1 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Durchlassspannungsgruppe geliefert. Z.B.: LA E63F-EAFA-24-1 bedeutet, dass nach Durchlassspannung gruppiert wird. Auf einem Gurt ist nur eine der Durchlasspannungsgruppen -3B, -4A, -4B oder -5A enthalten (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LA E63F-EAFA-24-1 means that only one group EA, EB or FA will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LA E63F-EAFA-24-1 means that only 1 wavelength group -2, -3, or -4 will be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 5 for explanation). In a similar manner for LED, where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any one reel. E.g. LA E63F-EAFA-24-1 means that only 1 forward voltage group -3B, -4A, 4B or -5A will be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page 5 for explanation). 2004-09-16 2 LA E63F Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TA=25C) IF 70 mA Stostrom Surge current t 10 s, D = 0.1, TA=25C IFM 0.1 A Sperrspannung3) Seite 16 Reverse voltage3) page 16 (TA=25C) VR 12 V Leistungsaufnahme Power consumption (TA=25C) Ptot 190 mW Rth JA 300 K/W Rth JS 130 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 16 Junction/ambient4) page 16 Sperrschicht/Lotpad Junction/soldering point 2004-09-16 3 LA E63F Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 50 mA (typ.) Dominantwellenlange5) Seite 16 Dominant wavelength5) page 16 IF = 50 mA Symbol Symbol Wert Value Einheit Unit peak 624 nm dom 617* nm -5/+7 Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 50 mA (typ.) 18 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 30 Grad deg. Durchlassspannung6) Seite 16 Forward voltage6) page 16 IF = 50 mA (min.) (typ.) (max.) VF VF VF 2.05* 2.30 2.65 V V V Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.2 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 50 mA; -10C T 100C (typ.) TCpeak 0.14 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 50 mA; -10C T 100C (typ.) TCdom 0.07 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 50 mA; -10C T 100C (typ.) TCV - 4.7 mV/K Optischer Wirkungsgrad Optical efficiency IF = 50 mA (typ.) opt 43 lm/W * Einzelgruppen siehe Seite 5 Individual groups on page 5 2004-09-16 4 LA E63F Wellenlangengruppen (Dominantwellenlange)5) Seite 16 Wavelength Groups (Dominant Wavelength)5) page 16 Durchlassspannungsgruppen6) Seite 16 Forward Voltage Groups6) page 16 Gruppe Group Gruppe Group Wellenlange Wavelength Einheit Unit min. max. 2 612 616 nm 3 616 620 4 620 624 Durchlassspannung Forward voltage Einheit Unit min. max. 3B 2.05 2.20 V nm 4A 2.20 2.35 V nm 4B 2.35 2.50 V 5A 2.50 2.65 V Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Partieller Lichtfluss1) Seite 16 Lichtstarke2) Seite 16 Lichtstrom2) Seite 16 Brightness Group Partial Flux1) Seite 16 Luminous Intensity2) page 16 Luminous Flux2) page 16 EV [lux] IV (mcd) V (mlm) EA EB FA 7100 ... 9000 9000 ... 11200 11200 ... 14000 t.b.d. (typ.) t.b.d. (typ.) t.b.d. (typ.) t.b.d. (typ.) t.b.d. (typ.) t.b.d. (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 3 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of 3 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: EB-3-4A Example: EB-3-4A Helligkeitsgruppe Brightness Group Wellenlange Wavelength Durchlassspannung Forward Voltage EB 3 4A Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2004-09-16 5 LA E63F Prinzipieller Messaufbau fur Partial Flux Messung Schematic test method for partial flux measurement Referenzebene des Detektors (o14 mm) Reference layer of detector (o14 mm) d = 40 OHAY0907 2004-09-16 6 LA E63F Relative spektrale Emission2) Seite 16 Relative Spectral Emission2) page 16 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 50 mA OHL00571 100 % I rel 80 V 60 40 20 0 400 450 500 550 600 650 700 nm 2) Seite 16 Abstrahlcharakteristik Radiation Characteristic2) page 16 Irel = f (); TA = 25 C 40 30 20 10 50 OHL00021 0 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2004-09-16 0.8 0.6 0.4 0 20 7 40 60 80 100 120 LA E63F Durchlassstrom2) Seite 16 Forward Current2) page 16 IF = f (VF); TA = 25 C Relative Lichtstarke2) 7) Seite 16 Relative Luminous Intensity2) 7) page 16 EV/EV(50 mA) = f (IF); TA = 25 C OHL00573 10 2 mA OHL20572 10 1 EV IF E V (50 mA) 10 0 10 1 5 10 -1 10 0 5 10 -1 1.6 1.8 2.0 2.2 10 -2 0 10 2.4 V 2.6 10 1 5 mA 10 2 VF IF 2) Seite 16 Relative Lichtstarke Relative Luminous Intensity2) page 16 EV/EV(25 C) = f (Tj); IF = 50 mA EV OHL20622 1.8 E V (25 C) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 C 100 Tj 2004-09-16 8 LA E63F Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f (T ) OHL01413 80 mA IF 70 60 TA TS 50 40 30 20 A temp. ambient S temp. solder point 10 0 0 20 40 60 80 C 100 T Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C OHL02046 0.12 D= IF A D= IF A 0.005 0.01 0.02 0.05 0.10 OHL02045 0.12 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.10 0.08 0.08 D= 0.06 0.04 0.02 0.06 0.1 0.2 0.5 1 tP D= T 0.04 tP 0.02 IF T D= T tP IF T 0 10-5 10-4 10-3 10-2 10-1 100 101 s 102 0 10-5 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2004-09-16 tP 9 LA E63F Mazeichnung8) Seite 16 Package Outlines8) page 16 3.0 (0.118) 3.8 (0.150) max. 2.6 (0.102) 2.3 (0.091) 2.1 (0.083) 1.7 (0.067) 2.1 (0.083) 0.9 (0.035) 0.8 (0.031) 0.6 (0.024) 0.7 (0.028) 1.1 (0.043) C Package marking A A A C o2.55 (0.100) o2.60 (0.102) 0.1 (0.004) typ 0.6 (0.024) 0.4 (0.016) 0.18 (0.007) 0.5 (0.020) 3.7 (0.146) 3.3 (0.130) 3.4 (0.134) 3.0 (0.118) A 41 A (2.4) (0.095) A 0.13 (0.005) GPLY6113 Gehausekennung: Package mark: Gewicht / Approx. weight: abgeschragte Ecke bevelled edge 38 mg Gurtung / Polaritat und Lage8) Seite 16 Method of Taping / Polarity and Orientation8) page 16 Verpackungseinheit 2000/Rolle, o330 mm Packing unit 2000/reel, o330 mm 3.65 (0.144) 4 (0.157) 1.5 (0.059) 2 (0.079) 2 (0.079) 1.5 (0.059) 1.5 (0.059) 8 (0.315) 2004-09-16 10 5 12 (0.472) 1.75 (0.069) 5.5 (0.217) 2.9 (0.114) 3.45 (0.136) C A A A 0.4 (0.016) OHAY0736 LA E63F Empfohlenes Lotpaddesign verwendbar fur TOPLED(R) und Power TOPLED(R) IR Reflow Loten8) Seite 16 Recommended Solder Pad useable for TOPLED(R) and Power TOPLED(R) IR Reflow Soldering8) page 16 Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Padgeometrie fur verbesserte Warmeableitung 3.3 (0.130) Paddesign for improved heat dissipation 3.3 (0.130) Anode 2.3 (0.091) 11.1 (0.437) 1.5 (0.059) 1.1 (0.043) 3.7 (0.146) 0.8 (0.031) 0.7 (0.028) Kathode/ Cathode Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Cu Flache / <_ 16 mm 2 per pad Cu-area Lotstoplack Solder resist Empfohlenes Lotpaddesign8) Seite 16 Recommended Solder Pad8) page 16 OHLPY440 Wellenloten (TTW) TTW Soldering Anode Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. 2 (0.079) 6.1 (0.240) Bewegungsrichtung der Platine PCB-direction 1 (0.039) 2 (0.079) 2 (0.079) 3 (0.118) 6 (0.236) 2.8 (0.110) 2.8 (0.110) Padgeometrie fur verbesserte Warmeableitung 0.5 (0.020) Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Paddesign for improved heat dissipation Kathode/ Cathode Cu Flache / > 16 mm 2 per pad Cu-area Lotstoplack Solder resist OHAY1583 2004-09-16 11 LA E63F Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 IR-Reflow Lotprofil fur bleifreies Loten IR Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 min. condition for IR Reflow Soldering: solder point temperature 235 C for at least 10 sec. Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Wellenloten (TTW) Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2004-09-16 12 s 250 LA E63F Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: pl e Semiconductors RoHS Compliant ML Temp ST 2 260 C RT (6P) BATCH NO: Batch Number Bar Code Additional TEXT (9D) D/C: Date Code Sa m (1T) LOT NO: Lot Number R077 Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel DEMY PACKVAR: Packing Type (G) GROUP: X - X - X Bar Code Forward Voltage Rank Wavelength Rank Brightness Rank OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 0.3 12 + - 0.1 4 0.1 8 0.1 2 0.05 1.5 + 0.1 1.75 0.1 5.5 0.05 (0.157 0.004) (0.315 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.217 0.002) Reel dimensions in mm (inch) A 330 (13) 2004-09-16 W Nmin W1 W2 max 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 13 LA E63F Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see . lab e H) nk, (R bla cod If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs d nta ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co ce is UR 24 6 da e y MI 40 be tim C h e ThISTSE l pro < tor tim or ). 23 tim e at t wilntC or l wit fac MO Flo tim s TO at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al ure Le ist en ref e e 10 tim ure se for ist ale op se for > , Mo se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo r-p RH g, bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo N TIO U A C O S R A M d Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% If wet, parts still adequately dry. change desiccant 5% Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label L VE el LE see . lab e H) nk, (R bla cod If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 _ < inf pa % of to ak 90 urs d ). < ns (pe or d Ho urs de , cte itio Ho urs an bje ing co C 72 nd Ho urs 5 te 48 C su ss e Ho co ce 24 6 da y 40 be tim e e C h l pro < tor tim or e ). wit 23 tim at t wilnt or l fac C Flo tim s at or ca ale at re. Flo d or el nth tha nti Flo uiv du 4 if: rea es l Flo lab mo ide 5 ce eq low g, ve l vic 5a is be or de 24 tin en pro 6 Le ve l de , e te co , g: un wh Le ve l ke r se da ure ba ed low Le ve mo % ba e ba al d Le ist ure en ref e e 10 tim se for ist ure ale op se for > , Mo se 3 ist ure is or . , se is ha Mo nk be ist nk g rd -03 Mo in Flo r-p RH g, bla Mo ba Ca TD po If bla hin % kin life s (if ar s p. wit 10 ba tor t. J-S thi, va elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE dy 1. e 4 ref 8 red reqy is 2. bo Mo /JE tim e e dit2b 16 req : a) Sto es tim or mi is e ed or g e IPC tim vic b) or Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e 1 l Flo If al ref tim ve l 2 2a 4. se d 3 Le ve l g an Le ve l Ba te ure Le ve Le ist ure Da ist ure Mo ist ure Mo ist Mo Mo N VE RS IO insITI TO T ntaNSUC U g coSEND Ais baURMIECO CThIST SE MY DE 8 R1 -1 Q 1+ P: PGR (G OU ul LS ti Y TO T6 PL 76 01 D/ ) (9D 00 C: 44 M : 4 : 20 23 TY )Q (Q TC BA ) : 12 (6P NO ) OD 25 014 110 (X ) PR NO : (1T LO T 3G O 2100 H1 Se S m RA ic M on du O ct pto or H NO s 8 2199 ) Muster ED Bin Bin 1: Bin 2: P3: Q- 1-2 ML 1-2 0 2 0 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R RT PA 77 al CK TE VA XT R: MO TO OP 1+ P: P- Q -1 MY DE R1 8 ul LS ti Y TO T6 PL 76 GR ) (G 44 D/C : 01 (9D ) 00 M : 4 23 TY : 20 )Q (Q O H1 Se S m RA ic M on du O ct pto or NO s TC H 3G BA ) : 12 NO ) : OD 25 014 110 O SR AM (X) PR NO (1T LO T (6P 998 021 210 OU Muster ED Bin Bin 1: Bin 2: P-1 3: Q- -20 ML 1-2 2 0 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R RT PA 77 al CK TE VA XT R: Barcode label Packing Sealing label OHA02044 2004-09-16 14 LA E63F Revision History: 2004-09-16 Previous Version: 2004-08-27 Page Subjects (major changes since last revision) Date of change 7 new diagram: forward current 2004-09-16 Anm.: Gema IEC 60825-1 (EN 60825-1) gilt: LED STRAHLUNG NICHT DIREKT MIT OPTISCHEN INSTRUMENTEN BETRACHTEN LED KLASSE 1M Note: According IEC 60825-1 (EN 60825-1): LED RADIATION DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS CLASS 1M LED PRODUCT Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components9) page 16 may only be used in life-support devices or systems10) page 16 with the express written approval of OSRAM OS. 2004-09-16 15 LA E63F Funoten: Remarks: 1) 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line.If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm 2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.05 V. 2) 3) 4) 5) 6) 7) 8) 9) 10) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen.Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. Die LED kann kurzzeitig in Sperrichtung betrieben werden. RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm 2 je Pad) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,05 V ermittelt. Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1 Mae werden wie folgt angegeben: mm (inch) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 3) 4) 5) 6) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 8) Dimensions are specified as follows: mm (inch) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. 2004-09-16 7) 16 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.