CONSTANT PHASE-LIMITING AMPLIFIERS MODEL: LCPM SERIES FEATURES * * * * Up to 70 dB dynamic range 3 phase variation 5 dB amplitude variation Fast recovery OPTIONS * * * * Customized center frequencies Custom packaging High-reliability screening Matched sets MODEL NUMBER LCPM-3010-70 LCPM-6020-70 LCPM-7030-70 LCPM-12020-70 LCPM-14040-70 LCPM-16040-70 LCPM-200100-70 LCPM-400100-60 CENTER FREQUENCY (MHz) 3 dB BANDWIDTH (dBm) 30 60 70 120 140 160 200 400 10 20 30 20 40 40 100 100 ADDITIONAL SPECIFICATIONS The above models are available in `A, B and G' housings. Custom housings and electrical specifications are also available. Contact factory for details. Phase variation is measured at center frequency and 25C. Add 3 over operating temperature of -40 to +85C. Output power is 10 dBm nominal at center frequency and 25C. Additional output power variation of 1 dB will occur over operating temperature of -40 to +85C. Input/output impedance is 50 . Input VSWR is < 1.5:1 typical. Output VSWR is < 2.0:1 typical. Noise figure is typically less than 15 dB at center frequency and 25C. Power: -12 VDC at 150 mA typical. DYNAMIC RANGE (dBm) -70 -70 -70 -65 -65 -65 -65 -60 to to to to to to to to 0 0 0 +5 +5 +5 +5 0 OUTPUT POWER VARIATION (dB) PHASE VARIATION (Deg.) 0.5 0.5 0.5 0.5 1 1 1 1 3 3 3 5 5 5 5 5 TYPICAL TEST DATA TYPICAL PHASE RESPONSE VS. INPUT POWER ORDER OPTIONS For -15 VDC, add suffix "C". Matching up to three channels to within 3 at 25C is available. Contact factory for details. Typical part number: LCPM-16040-70BC (for `B' housing at -15 VDC). NOTE: FOR MODIFICATION OF OUR STANDARD MODELS, PLEASE CONSULT FACTORY. 100 Davids Drive, Hauppauge, NY 11788 * TEL: (631) 439-9220 * FAX: (631) 436-7430 * www.miteq.com C-17B/17 08-14-07 LCPM SERIES OUTLINE DRAWINGS OUTLINE A OUTLINE B OUTLINE G NOTE: DIMENSIONS SHOWN IN BRACKETS [ ] ARE IN MILLIMETERS. 100 Davids Drive, Hauppauge, NY 11788 * TEL: (631) 439-9220 * FAX: (631) 436-7430 * www.miteq.com C-17B/18 08-14-07