SAMPLEKITVNH7 VNH MO-7 Sample Kit box Data brief Description The SAMPLEKITVNH7 provides you a selection of ST VIPower M0-7 HBridge drivers representative of the entire family useful for evaluating and promoting the product family. Features Immediate evaluation of M0-7 HBridge drivers with demonstration examples The Kit includes: - 8 samples - Printed card providing overview of product portfolio, key features, main applications, package description. Table 1. Device summary Part number March 2019 RON (High- and low-side) (mOhm) Package VNH7100BAS 60-40 SO-16N VNH7070BAS 42-30 SO-16N VNH7070AY 42-30 PowerSSO-36 Triple Pad VNH7040AY 27-14 PowerSSO-36 Triple Pad VNHD7012AY 12 PowerSSO-36 VNHD7008AY 8 PowerSSO-36 DB3875 Rev 2 For further information contact your local STMicroelectronics sales office. 1/5 www.st.com Overview 1 SAMPLEKITVNH7 Overview The ST VIPower M0-7 HBridge is a family of bridge motor drivers intended for a wide range of automotive applications. The family is designed using STMicroelectronics' well known and proven proprietary VIPower(R) technology that allows to efficiently integrate on the same die the true PowerMOSFET with an intelligent signal/ protection circuitry. The devices are housed in tiny packages SO-16N, PowerSSO-36 single and Triple Pad packages able to optimize the dissipation performances. The input signals INA and INB can directly interface the microcontroller to select the motor direction and the brake conditions. Two selection pins (SEL0 and SEL1) are available to address to the microcontroller the information available on the MultiSense. The MultiSense pin allows to monitor the motor current, provides a voltage proportional to the battery value and the information on the temperature of the chip. The integrated protections are: load current limitation, overload active power limitation (with latch-off), overtemperature shutdown (with latch-off) and cross current protection. The PWM, up to 20 KHz, allows to control the speed of the motor in all possible conditions. 2/5 DB3875 Rev 2 SAMPLEKITVNH7 2 Ordering information Ordering information Table 2. Order code Order code SAMPLEKITVNH7 Reference M0-7 HBridge drivers Sample kit box DB3875 Rev 2 3/5 4 Revision history 3 SAMPLEKITVNH7 Revision history Table 3. Document revision history 4/5 Date Revision Changes 05-Mar-2019 1 Initial release. 15-Mar-2019 2 Typo error. DB3875 Rev 2 SAMPLEKITVNH7 IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2019 STMicroelectronics - All rights reserved DB3875 Rev 2 5/5 5