EAO - Your Expert Partner for Human Machine Interfaces EAO Product Information Series 14 Switches and Indicators 14 Contents 14 Description ...................................................................................................... 3 Product Assembly .......................................................................................... 4 Devices raised mounting ............................................................................... 6 Devices flush mounting ............................................................................... 13 Accessories................................................................................................... 17 Technical Data............................................................................................... 27 Typical Applications ..................................................................................... 30 Application guidelines.................................................................................. 31 Marking .......................................................................................................... 32 Drawings........................................................................................................ 36 Index............................................................................................................... 56 2 07.2009 14 Description Specimen order Product Information General notes The Series 14 illuminated pushbuttons combine the robust actuators of the Series 04 with choice of either snap-action switching elements with gold plated silver contacts for one changeover only. These pushbuttons have an IP 67 proof front (temporary emerson) and can be immersed to a depth of one metre. The range includes pushbuttons, keylock switches and selector switches. Anodized aluminium parts can have visible variations due productiontechnical reasons. Mounting Mounted from the front through either 22.5 mm dia cut out for raised or 30.5 mm dia for flush. The pushbuttons are secured to the panel by means of a fixing ring/ nut and prevented from twisting by two srews. To ensure correct positioning of the pushbuttons we can provide a positioning insert if required. The Low Level switching elements with universal terminals allow them to PCB mounted. These terminals are also suitable for dip soldering. A plug-in base is available, which when soldered to the board allows the switch to be easily plugged-in. 0 Illuminated pushbutton : - Illuminiated pushbutton actuator, 29 mm dia., snap-action switching element, 1NC + 1 NO, momentary action, soldering terminal 14-131.0252 Essential accessories : - Lens plastic red 704.602.2 - Marking plate white translucent 704.609.9 - Front ring aluminium natural 704.600.1 - Single-LED, T5.5, 12 VAC/DC, white 10-2109.1069 We reserve the right to modify technical data All dimensions in mm Lenses Lenses of transparent plastic or aluminium are available in various standard colours. Marking For further information about engraving, hot stamping and film inserts see part Marking. Illumination The T5.5 incandescent (filament) lamp (6, 12, 24, 28, 30, 36, 48 V) ensures perfect illumination of the lenses, which are supplied in various colours. T5.5 Single-Chip LED (6, 12, 24, 28, 48 V) are also available in blue, green, red, white or yellow. Do not solder the terminals directly, because of the high surface temperature. Luminosity and wave length scattering caused by the technology used in the LED manufacturing processes may lead to visual differences in our products. Position indication The status of a maintained action switch can be determinded by the position of the lens. Keylock switch Single locks (2 positions). There are 10 different locks with standard numbers 1001 ... 1010. If the lock number is not specified, we will supply standard number 1001. Additional lock numbers are available on request. Two keys are supplied with each keylock switch. Spare keys for standard locks may be ordered by quoting Typ-Nr. 14-987 (please state the lock number). 3 07.2009 14 Product Assembly Illuminated pushbutton, raised mounting 0 1 2 3 1 2 3 4 5 6 7 Front ring Lens Marking plate LED Actuator housing with switching element Front plate Fixing nut 1 2 3 4 5 6 7 8 Front bezel set, flush mounting Lens Marking plate LED Actuator housing with switching element Front panel Pressure ring Fixing nut 4 5 6 7 Illuminated pushbutton, flush mounting 0 1 2 3 4 5 6 7 8 4 07.2009 14 Product Assembly Keylock switch, raised mounting 0 1 1 2 3 4 Front ring Actuator housing with switching element Front plate Fixing nut 1 2 3 4 5 6 Front ring Actuator housing with switching element Front plate Anti-twist ring Pressure ring Fixing nut 2 3 4 Selector switch, flush mounting 0 1 2 3 4 5 6 5 07.2009 14 Devices raised mounting Indicator actuator full face illumination Essential Accessories: d Lens cap page 18 d d Marking cap for Lens cap page 19 Single-LED page 24 2 Circuit drawing 2 2 Technical drawing UT UT S S1 UT Mounting dimensions 1D 2D - O 29 mm Typ-Nr. 14-741.006 14-742.006 14-030.005 14-030.002 14-031.006 Component layout IP 67 Terminals Diode (1N 4007) Indicator actuator full face illumination Front protection Continuation see next page e 5 5 5 5 5 17 17 17 17 17 56 57 3 3 2 0.011 0.011 0.010 0.010 0.011 Diode (1N 4007): D = Diode, - = without Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 Indicator actuator front illumination Essential Accessories: d Front ring page 19 d d d Lens plastic page 17 Marking plate for Lens plastic and metal page 18 Single-LED page 24 Technical drawing Circuit drawing S S1 UT Mounting dimensions IP 67 O 29 mm Typ-Nr. 14-040.005 14-040.002 14-041.006 Component layout Indicator actuator front illumination Terminals Front protection Continuation see next page e 2 5 5 5 19 19 19 3 3 2 0.050 0.050 0.050 Terminals: S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm), UT = Universal terminal Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 6 07.2009 14 Devices raised mounting Buzzer Circuit drawing S1 S1 Technical drawing IP 65 O 29 mm Typ-Nr. 14-810.902 14-810.002 Mounting dimensions Buzzer Operation voltage 24 VDC Front cap Brass nickel-plated Plastic black Terminals Front protection Continuation see next page e 5 5 1 1 1 1 0.016 0.016 Further information in the Technical Data and Typical Applications Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 7 07.2009 14 Devices raised mounting Illuminated actuator pushbutton Essential Accessories: d Front ring page 19 d d d Lens plastic page 17 Marking plate for Lens plastic and metal page 18 Single-LED page 24 - 2 NC - 2 NO - 1 NC + 1 NO 1D 2D - M 2 NC + 2 NO 1D 2D - 3 NC + 3 NO - 4 NC + 4 NO - MA M MA M MA M MA M MA M 2 2 2 2 Circuit drawing 1 NO 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Technical drawing - UT UT UT UT UT UT UT UT UT UT UT UT UT UT S S1 S S1 UT UT UT UT S S S S S S Component layout 1 NC + 1 NO MA M MA M MA M MA M MA M MA M MA M MA O 29 mm Typ-Nr. 14-476.036 14-436.036 14-473.036 14-433.036 14-475.036 14-435.036 14-472.036 14-432.036 14-471.036 14-431.036 14-747.0292 14-743.0292 14-748.0292 14-744.0292 14-271.0252 14-271.022 14-131.0252 14-131.022 14-749.0292 14-745.0292 14-750.0292 14-746.0292 14-272.0252 14-132.0252 14-273.0252 14-133.0252 14-274.0252 14-134.0252 Mounting dimensions SA - Terminals LL Contacts 1 NC Switching action IP 67 Diode (1N 4007) Switching system Illuminated actuator pushbutton Front protection Continuation see next page e 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 12 39 15 42 14 41 13 40 16 43 9 36 10 37 11 11 38 38 6 33 7 34 8 35 5 32 4 31 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.014 0.014 0.014 0.014 0.013 0.013 0.013 0.013 0.016 0.016 0.016 0.016 0.015 0.015 0.017 0.017 0.019 0.019 Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Diode (1N 4007): - = without, D = Diode Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 8 07.2009 14 Devices raised mounting Mushroom-head actuator pushbutton Essential Accessories: d Front ring page 19 d d Marking plate for Mushroom-head cap page 18 Mushroom-head cap page 18 2 NO SA 1 NC + 1 NO M 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO MA M MA M MA M Circuit drawing 2 NC 2 2 2 2 2 2 2 2 2 2 Technical drawing 1 NO UT UT UT UT UT UT UT UT UT UT S S1 S S1 S S S S S S Mounting dimensions 1 NC + 1 NO MA M MA M MA M MA M MA M MA O 40 mm Typ-Nr. 14-476.036 14-436.036 14-473.036 14-433.036 14-475.036 14-435.036 14-472.036 14-432.036 14-471.036 14-431.036 14-271.0252 14-271.022 14-131.0252 14-131.022 14-272.0252 14-132.0252 14-273.0252 14-133.0252 14-274.0252 14-134.0252 Component layout LL Terminals IP 67 Contacts 1 NC Switching action Switching system Mushroom-head actuator pushbutton Front protection Continuation see next page e 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 12 39 15 42 14 41 13 40 16 43 11 11 38 38 8 35 5 32 4 31 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.013 0.013 0.013 0.013 0.015 0.015 0.017 0.017 0.019 0.019 Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 9 07.2009 14 Devices raised mounting Illuminated mushroom-head actuator pushbutton Essential Accessories: d Front ring page 19 d d d Marking plate for Mushroom-head cap page 18 Mushroom-head cap illuminated page 18 Single-LED page 24 - 2 NC - 2 NO - 1 NC + 1 NO 1D 2D - M 2 NC + 2 NO 1D 2D - 3 NC + 3 NO - 4 NC + 4 NO - MA M MA M MA M MA M MA M 2 2 2 2 Circuit drawing 1 NO 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Technical drawing - UT UT UT UT UT UT UT UT UT UT UT UT UT UT S S1 S S1 UT UT UT UT S S S S S S Component layout 1 NC + 1 NO MA M MA M MA M MA M MA M MA M MA M MA O 40 mm Typ-Nr. 14-476.036 14-436.036 14-473.036 14-433.036 14-475.036 14-435.036 14-472.036 14-432.036 14-471.036 14-431.036 14-747.0292 14-743.0292 14-748.0292 14-744.0292 14-271.0252 14-271.022 14-131.0252 14-131.022 14-749.0292 14-745.0292 14-750.0292 14-746.0292 14-272.0252 14-132.0252 14-273.0252 14-133.0252 14-274.0252 14-134.0252 Mounting dimensions SA - Terminals LL Contacts 1 NC Switching action IP 67 Diode (1N 4007) Switching system Illuminated mushroom-head actuator pushbutton Front protection Continuation see next page e 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 12 39 15 42 14 41 13 40 16 43 9 36 10 37 11 11 38 38 6 33 7 34 8 35 5 32 4 31 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.014 0.014 0.014 0.014 0.013 0.013 0.013 0.013 0.016 0.016 0.016 0.016 0.015 0.015 0.017 0.017 0.019 0.019 Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Diode (1N 4007): - = without, D = Diode Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 10 07.2009 14 Devices raised mounting Keylock switch 2 positions MA UT 1 NC + 1 NO MA S S1 Position A : Basic position Position C : Momentary action Standard lock 1001 Front : Plastic black IP 65 Aluminium natural LL SA 2 NC + 2 NO MA S 3 NC + 3 NO MA S 4 NC + 4 NO MA S 1 NC + 1 NO 2 NO 1 NC + 1 NO M M M 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO M M M UT UT S S1 S S S A C C+A A C C+A A C C+A A C C+A A C C+A A C C+A A C C+A A A A A A A A Component layout 2 NO Key remove UT 2 2 2 2 2 2 2 2 Circuit drawing SA MA Technical drawing LL O 29 mm Typ-Nr. 14-415.036K 14-418.036K 14-412.036K 14-414.036K 14-417.036K 14-411.036K 14-235.025K2 14-335.025K2 14-135.025K2 14-235.022K 14-335.022K 14-135.022K 14-236.025K2 14-336.025K2 14-136.025K2 14-237.025K2 14-337.025K2 14-137.025K2 14-238.025K2 14-338.025K2 14-138.025K2 14-438.036K 14-437.036K 14-141.025K2 14-141.022K 14-142.025K2 14-143.025K2 14-144.025K2 Mounting dimensions IP 65 Contacts 1 NC + 1 NO Terminals Keylock switch 2 positions Position A : Basic position Position C : Maintained action Standard lock 1001, Front : Plastic black Front ring Aluminium natural Switching action 0 Switching system Front protection Continuation see next page e 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 21 54 54 54 55 55 55 50 50 50 50 50 50 51 51 51 52 52 52 53 53 53 48 49 44 44 45 46 47 0.030 0.030 0.030 0.030 0.030 0.030 0.029 0.029 0.029 0.029 0.029 0.029 0.031 0.031 0.031 0.033 0.033 0.033 0.035 0.035 0.035 0.030 0.030 0.029 0.029 0.031 0.033 0.035 Keylock switches are supplied with 2 keys. Other lock numbers on request Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 11 07.2009 14 Devices raised mounting Selector switch 2 positions non-illuminative LL 2 NC 2 NO SA 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO Plastic black short LL 1 NC + 1 NO 2 NC 2 NO SA 1 NC + 1 NO 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO MA UT M UT MA UT M UT MA UT M UT MA S S1 M S S1 MA S M S MA S M S MA S M S MA UT M UT MA UT M UT MA UT M UT MA S S1 M S S1 MA S M S MA S M S MA S M S O 29 mm Typ-Nr. 14-572.0360 14-567.0360 14-571.0360 14-566.0360 14-570.0360 14-565.0360 14-556.02502 14-556.0220 14-551.02502 14-551.0220 14-557.02502 14-552.02502 14-558.02502 14-553.02502 14-559.02502 14-554.02502 14-522.0360 14-517.0360 14-521.0360 14-516.0360 14-520.0360 14-515.0360 14-506.02502 14-506.0220 14-501.02502 14-501.0220 14-507.02502 14-502.02502 14-508.02502 14-503.02502 14-509.02502 14-504.02502 Component layout Terminals Switching action Contacts 1 NC + 1 NO 2 2 2 2 2 2 2 2 2 2 2 2 Circuit drawing IP 67 Lever Plastic black long Technical drawing Selector switch 2 positions Position A : Basic position Front ring Aluminium natural Mounting dimensions 0 Switching system Front protection Continuation see next page e 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 23 29 22 28 21 30 23 24 24 17 17 25 18 26 19 27 20 29 22 28 21 30 23 24 24 17 17 25 18 26 19 27 20 0.025 0.025 0.025 0.025 0.025 0.025 0.024 0.024 0.024 0.024 0.026 0.026 0.028 0.028 0.030 0.030 0.025 0.025 0.025 0.025 0.025 0.025 0.024 0.024 0.024 0.024 0.026 0.026 0.028 0.028 0.030 0.030 Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 12 07.2009 14 Devices flush mounting Indicator actuator, flush mounting Essential Accessories: d Front bezel set, flush mounting page 20 d d d Lens plastic page 17 Marking plate for Lens plastic and metal page 18 Single-LED page 24 Technical drawing Circuit drawing S S1 UT Mounting dimensions IP 67 O 35 mm Typ-Nr. 14-040.005 14-040.002 14-041.006 Component layout Indicator actuator, flush mounting Terminals Front protection Continuation see next page e 2 1 1 1 24 24 24 3 3 2 0.050 0.050 0.050 Terminals: S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm), UT = Universal terminal Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 Buzzer, flush mounting Circuit drawing S1 S1 Technical drawing IP 40 O 35 mm Typ-Nr. 14-810.910 14-810.918 Mounting dimensions Buzzer, flush mounting Operation voltage : 24 VDC Front cap Aluminium black Aluminium natural Terminals Front protection Continuation see next page e 1 1 16 16 1 1 0.016 0.016 Further information in the Technical Data and Typical Applications Terminals: S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 13 07.2009 14 Devices flush mounting Illuminated pushbutton actuator, flush mounting Essential Accessories: d Front bezel set, flush mounting page 20 d d d Lens plastic page 17 Marking plate for Lens plastic and metal page 18 Single-LED page 24 - 2 NC - 2 NO - 1 NC + 1 NO 1D 2D - M 2 NC + 2 NO 1D 2D - 3 NC + 3 NO - 4 NC + 4 NO - MA M MA M MA M MA M MA M 2 2 2 2 Circuit drawing 1 NO 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Technical drawing - UT UT UT UT UT UT UT UT UT UT UT UT UT UT S S1 S S1 UT UT UT UT S S S S S S Component layout 1 NC + 1 NO MA M MA M MA M MA M MA M MA M MA M MA O 35 mm Typ-Nr. 14-476.036 14-436.036 14-473.036 14-433.036 14-475.036 14-435.036 14-472.036 14-432.036 14-471.036 14-431.036 14-747.0292 14-743.0292 14-748.0292 14-744.0292 14-271.0252 14-271.022 14-131.0252 14-131.022 14-749.0292 14-745.0292 14-750.0292 14-746.0292 14-272.0252 14-132.0252 14-273.0252 14-133.0252 14-274.0252 14-134.0252 Mounting dimensions SA - Terminals LL Contacts 1 NC Switching action IP 67 Diode (1N 4007) Switching system Illuminated pushbutton actuator, flush mounting Front protection Continuation see next page e 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 12 39 15 42 14 41 13 40 16 43 9 36 10 37 11 11 38 38 6 33 7 34 8 35 5 32 4 31 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.015 0.014 0.014 0.014 0.014 0.013 0.013 0.013 0.013 0.016 0.016 0.016 0.016 0.015 0.015 0.017 0.017 0.019 0.019 Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Diode (1N 4007): - = without, D = Diode Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 14 07.2009 14 Devices flush mounting Keylock switch actuator 2 positions, flush mounting Essential Accessories: d Anti-twist ring, flush mounting page 25 d Front bezel set, flush mounting page 20 MA UT 1 NC + 1 NO MA S S1 Position A : Basic position Position C : Momentary action Standard lock 1001 Front : Plastic black IP 65 LL SA 2 NC + 2 NO MA S 3 NC + 3 NO MA S 4 NC + 4 NO MA S 1 NC + 1 NO 2 NO 1 NC + 1 NO M M M 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO M M M UT UT S S1 S S S 2 2 2 2 2 2 2 2 Circuit drawing 2 NO A C C+A A C C+A A C C+A A C C+A A C C+A A C C+A A C C+A A A A A A A A Component layout UT Technical drawing SA MA Key remove LL O 35 mm Typ-Nr. 14-415.036K 14-418.036K 14-412.036K 14-414.036K 14-417.036K 14-411.036K 14-235.025K2 14-335.025K2 14-135.025K2 14-235.022K 14-335.022K 14-135.022K 14-236.025K2 14-336.025K2 14-136.025K2 14-237.025K2 14-337.025K2 14-137.025K2 14-238.025K2 14-338.025K2 14-138.025K2 14-438.036K 14-437.036K 14-141.025K2 14-141.022K 14-142.025K2 14-143.025K2 14-144.025K2 Mounting dimensions Keylock switch actuator 2 positions, flush mounting Position A : Basic position Position C : Maintained action Standard lock 1001, Front : Plastic black Contacts 1 NC + 1 NO Terminals Switching system IP 65 0 Switching action Front protection Continuation see next page e 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 54 54 54 55 55 55 50 50 50 50 50 50 51 51 51 52 52 52 53 53 53 48 49 44 44 45 46 47 0.030 0.030 0.030 0.030 0.030 0.030 0.029 0.029 0.029 0.029 0.029 0.029 0.031 0.031 0.031 0.033 0.033 0.033 0.035 0.035 0.035 0.030 0.030 0.029 0.029 0.031 0.033 0.035 Keylock switches are supplied with 2 keys. Other lock numbers on request Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 15 07.2009 14 Devices flush mounting Selector switch actuator 2 positions, flush mounting Essential Accessories: d Anti-twist ring, flush mounting page 25 d Front bezel set, flush mounting page 20 LL 2 NC 2 NO SA 1 NC + 1 NO M 2 NC + 2 NO 3 NC + 3 NO 4 NC + 4 NO MA M MA M MA M UT UT UT UT UT UT S S1 S S1 S S S S S S Component layout Terminals Switching action MA M MA M MA M MA O 35 mm Typ-Nr. 14-522.0360 14-517.0360 14-521.0360 14-516.0360 14-520.0360 14-515.0360 14-506.02502 14-506.0220 14-501.02502 14-501.0220 14-507.02502 14-502.02502 14-508.02502 14-503.02502 14-509.02502 14-504.02502 2 2 2 2 2 2 Circuit drawing IP 67 Contacts 1 NC + 1 NO Technical drawing Selector switch actuator 2 positions, flush mounting Position A : Basic position Lever Plastic black short Mounting dimensions 0 Switching system Front protection Continuation see next page e 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 29 22 28 21 30 23 24 24 17 17 25 18 26 19 27 20 0.025 0.025 0.025 0.025 0.025 0.025 0.024 0.024 0.024 0.024 0.026 0.026 0.028 0.028 0.030 0.030 Switching system: LL = Low level switching element, SA = Snap-action switching element Contacts: NC = Normally closed, NO = Normally open Switching action: MA = Maintained action, M = Momentary action Terminals: UT = Universal terminal, S = Soldering terminal, S1 = Soldering terminal (also pluggable 2.8 x 0.5 mm) Component layout from page 36, Mounting dimensions from page 37, Technical drawing from page 38, Circuit drawing from page 48 16 07.2009 14 Accessories Front Lens plastic To obtain IP 67 use Marking plate Typ-Nr. 704.609.X Continuation see next page Lens plastic Lens black opaque flush blue transparent flush colourless transparent flush green transparent flush red transparent flush yellow transparent flush O 29 mm Typ-Nr. 704.602.0 704.602.6 704.602.7 704.602.5 704.602.2 704.602.4 e 0.001 0.001 0.001 0.001 0.001 0.001 Lens raised, plastic To obtain IP 67 use Marking plate Typ-Nr. 704.610.X Continuation see next page Lens raised, plastic Lens colourless transparent flush green transparent flush red transparent flush yellow transparent flush O 29 mm Typ-Nr. 704.611.7 704.611.5 704.611.2 704.611.4 0.002 0.002 0.002 0.002 O 29 mm Typ-Nr. 704.601.01 704.601.61 704.601.41 704.601.81 704.601.51 704.601.21 704.601.91 0.001 0.001 0.001 0.001 0.001 0.001 0.001 O 29 mm Typ-Nr. 704.601.0 704.601.6 704.601.4 704.601.8 704.601.5 704.601.2 704.601.9 0.001 0.001 0.001 0.001 0.001 0.001 0.001 e Lens metal with spot To obtain IP 67 use Marking plate Typ-Nr. 704.609.X Continuation see next page Lens metal with spot Lens Aluminium black flush Aluminium blue flush Aluminium gold flush Aluminium natural flush Aluminium olive-green flush Aluminium red flush Stainless steel natural flush e Lens metal To obtain IP 67 use Marking plate Typ-Nr. 704.609.9 Continuation see next page Lens metal Lens Aluminium black flush Aluminium blue flush Aluminium gold flush Aluminium natural flush Aluminium olive-green flush Aluminium red flush Stainless steel natural flush e 17 07.2009 14 Accessories Lens cap To obtain IP 67 use Marking plate Typ-Nr. 704.608.X Continuation see next page O 29 mm Typ-Nr. 704.603.6 704.603.7 704.603.5 704.603.2 704.603.4 0.003 0.003 0.003 0.003 0.003 O 40 mm Typ-Nr. 704.604.0 704.604.5 704.604.2 704.604.4 0.001 0.001 0.001 0.001 O 40 mm Typ-Nr. 704.614.6 704.614.7 704.614.5 704.614.2 704.614.4 0.007 0.007 0.007 0.007 0.007 Marking plate Plastic colourless transparent ribbed Typ-Nr. 704.609.7 0.001 Plastic white translucent Plastic black opaque 704.609.9 704.609.0 0.001 0.001 Typ-Nr. 704.609.9 0.001 Lens Plastic blue transparent Plastic colourless transparent Plastic green transparent Plastic red transparent Plastic yellow transparent Lens cap e Mushroom-head cap To obtain IP 67 use Marking plate Typ-Nr. 704.609.9 Continuation see next page Mushroom-head cap Mushroom had cap Plastic black opaque Plastic green opaque Plastic red opaque Plastic yellow opaque e Mushroom-head cap illuminated To obtain IP 67 use Marking plate Typ-Nr. 704.609.9 Continuation see next page Mushroom-head cap illuminated Mushroom had cap Plastic blue transparent Plastic colourless transparent Plastic green transparent Plastic red transparent Plastic yellow transparent e Marking plate for Lens plastic and metal Continuation see next page Marking plate for Lens plastic and metal LED LED and Filament lamp non-illuminative e Marking plate for Mushroom-head cap Continuation see next page Marking plate for Mushroom-head cap 18 07.2009 Marking plate Plastic white translucent e 14 Accessories Marking cap for Lens raised, plastic Continuation see next page Marking cap for Lens raised, plastic LED LED and Filament lamp e Marking cap Plastic colourless transparent ribbed Typ-Nr. 704.610.7 0.001 Plastic white translucent 704.610.9 0.001 Marking cap Plastic colourless transparent ribbed Typ-Nr. 704.608.7 0.002 Plastic white translucent 704.608.9 0.002 O 29 mm Typ-Nr. 704.600.0 704.600.6 704.600.1 704.600.1A 704.600.9 0.003 0.003 0.005 0.005 0.006 Marking cap for Lens cap Continuation see next page Marking cap for Lens cap LED LED and Filament lamp e Front ring Continuation see next page Front ring e Front bezel set for Mushroom-head pushbutton O 50 mm Typ-Nr. 14-958.0 14-958.8 Technical drawing Front bezel set for Mushroom-head pushbutton Front Bezel Aluminium black Aluminium natural Mounting dimensions Continuation see next page e 4 4 28 28 0.042 0.042 Mounting dimensions from page 37, Technical drawing from page 38 19 07.2009 14 Accessories Front bezel set, flush mounting Front bezel set, flush mounting Front bezel Aluminium black Aluminium natural Stainless steel natural O 35 mm Typ-Nr. 704.955.0 704.955.1 704.955.9 Mounting dimensions Continuation see next page e 1 1 1 0.015 0.015 0.033 Mounting dimensions from page 37 Legend frame adhesive, Aluminium black Legend frame 30 x 50 mm for raised mounting 35 x 57.5 mm for flush mounting Technical drawing Continuation see next page e Typ-Nr. 704.968.2 9 0.001 704.968.3 10 0.001 Technical drawing from page 38 Legend plate insert for Legend frame 704.968.2 and 704.968.3 Continuation see next page Legend plate insert 14.5 x 23.5 mm, adhesive, Aluminium black 14.5 x 23.5 mm, adhesive, Aluminium natural e Typ-Nr. 704.968.1 0.001 704.968.0 0.001 Protective cover, raised mounting Mounting hole size 22.5 mm dia. Protective cover, raised mounting hinged, transparent, with means for sealing, for Pushbutton hinged, transparent, with means for sealing, for Selector switch hinged, transparent, with means for sealing, with spring fitted, for Pushbutton Protection cover 704.925.2 only for selector switches in basic position A applicable. Technical drawing from page 38 20 07.2009 Typ-Nr. 704.925.0 704.925.2 704.925.3 Technical drawing Continuation see next page e 4 0.007 6 4 0.007 0.007 14 Accessories Protective cover, flush mounting Mounting hole size 30.5 mm dia. Protective cover, flush mounting hinged, Aluminium natural, with means for sealing, for Pushbutton and Selector switch short lever hinged, Aluminium natural, with means for sealing, spring fitted, for Pushbutton and Selector switch short lever hinged, Aluminium natural, with window, spring fitted, for Pushbutton Technical drawing Continuation see next page e 8 0.019 704.928.28 5 0.019 704.928.18 7 0.019 Typ-Nr. 704.928.38 Technical drawing from page 38 Front protective cap for Indicator and Illuminated pushbutton for protection IP 68 Continuation see next page Front protective cap only together with Lenses 704.602.X, 704.601.X and Front rings 704.600.X Front protective cap Silicone colourless transparent e Typ-Nr. 704.953.0 0.002 Front protective ring Aluminium natural O 29 mm Typ-Nr. 704.600.5/A 0.005 Aluminium natural Chromed brass 704.600.3 704.600.2 0.005 0.005 Front protective ring for Illuminated pushbutton with front illumination (IP 67) Continuation see next page Front protective ring with transparent Pebax membrane, temperature resistance -40 C ... +85 C with transparent silicone membrane (extent resistant to sea water), temperature resistance -40 C ... +85 C e Front protective ring to be mounted with a torque of 40 Ncm onto actuator. Front bezel with protective membrane, flush mounting for Illuminated pushbutton (IP 67) Continuation see next page Front bezel with protective membrane, flush mounting with transparent silicone membrane with transparent silicone membrane, resistant to sea water Front bezel Aluminium black Aluminium natural Stainless steel natural O 35 mm Typ-Nr. 704.955.4 704.955.3 704.955.9E e 0.015 0.015 0.033 Front bezel to be mounted with a torque of 40 Ncm onto actuator. 21 07.2009 14 Accessories Blind plug Technical drawing Blind plug Size 28 mm dia., for mounting hole 22.5 mm dia. Size 36 mm dia., for mounting hole 30.5 mm dia. Front protection Continuation see next page e 3 0.004 2 0.007 Typ-Nr. 14-987.1001 0.006 Blind plug Plastic black IP 65 Typ-Nr. 704.960.4 Plastic black IP 65 704.964.8 Technical drawing from page 38 Spare key Continuation see next page Spare key Standard lock 1001 (KABA) e Other lock numbers on request > Backside PCB plug-in base PCB plug-in base 16.4 mm dia. x 9.8 mm for Low level switching element, Pins axial 17.8 x 12.9 mm x 9.8 mm for Snap-action switching element 2.8 mm, Pins axial 17.9 x 17.9 x 8.4 mm for Low level switching element, Pins bent at right-angle Typ-Nr. 31-940 31-942 31-941 Component layout Continuation see next page e 3 0.002 4 1 0.002 0.004 PCB plug-in base Pins right-angle : With the extendable mounting the distance between plug-in base and PCB can be varied up to 3 mm. Component layout from page 36 Flat receptacle Continuation see next page Flat receptacle 2.0 x 0.5 mm for Universal terminal 2.8 x 0.5 mm for Plug-in terminal 22 07.2009 e Typ-Nr. 31-945 0.001 31-946 0.001 14 Accessories Insulation sleeve Continuation see next page Insulation sleeve Cover Plug-in terminals for snap-action switching element 2.8 mm for Flat receptacle 31-945 for Flat receptacle 31-946 e Typ-Nr. 01-928 0.001 31-928 31-929 0.001 0.001 Typ-Nr. 01-929 0.010 Typ-Nr. 10-1109.1329 10-1109.1279 10-1112.1199 10-1112.1279 10-1113.1249 10-1114.1249 10-1116.1229 10-1119.1199 10-1106.1369 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 Terminal cover Continuation see next page Terminal cover e > Illumination Filament lamp Continuation see next page Filament lamp Socket T5.5 Operating voltage/-current 12 VAC/DC, 100 mA 12 VAC/DC, 50 mA 24 VAC/DC, 25 mA 24 VAC/DC, 50 mA 28 VAC/DC, 40 mA 30 VAC/DC, 40 mA 36 VAC/DC, 35 mA 48 VAC/DC, 25 mA 6 VAC/DC, 200 mA e 23 07.2009 14 Accessories Single-LED Continuation see next page Socket T5.5 Single-LED Light colour blue green red white diffuse yellow Operating voltage/-current 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA 12 VAC/DC, 7/14 mA 24 VAC/DC, 7/14 mA 28 VAC/DC, 7/14 mA 48 VAC/DC, 4/8 mA 6 VDC, 15 mA e Typ-Nr. 10-2109.1066 10-2112.1066 10-2113.1066 10-2119.1046 10-2106.3146 10-2109.1065 10-2112.1065 10-2113.1065 10-2119.1045 10-2106.3145 10-2109.1062 10-2112.1062 10-2113.1062 10-2119.1042 10-2106.3142 10-2109.1069 10-2112.1069 10-2113.1069 10-2119.1049 10-2106.3149 10-2109.1064 10-2112.1064 10-2113.1064 10-2119.1044 10-2106.3144 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 Typ-Nr. 02-912.2 0.045 02-912.3 02-912.4 02-912.1 0.090 0.095 0.025 Note: AC operation through halve-wave rectifier possible, slight flickering can occure. Terminal plate empty for fitting with series resistors Continuation see next page Terminal plate empty 10 spaces 125 x 60 x 15 mm 15 spaces 187.5 x 60 x 15 mm 20 spaces 250 x 60 x 15 mm 5 spaces 62.5 x 60 x 15 mm 24 07.2009 e 14 Accessories > Assembling Positioning insert Positioning insert Mounting dimensions Continuation see next page e 3 0.001 Typ-Nr. 704.954.0 0.002 Typ-Nr. 704.960.0 0.004 704.960.8 0.004 Typ-Nr. 700.006.0 0.003 Typ-Nr. 02-906 0.002 Typ-Nr. 14-910 Mounting dimensions from page 37 Anti-twist ring, flush mounting Continuation see next page Anti-twist ring, flush mounting e Reducing ring Devices 22.5 mm dia. in mounting hole size 30.5 mm dia. Continuation see next page Reducing ring Aluminium black Aluminium natural e You need to install two reduction rings. Lens plug for round lens, flush mounting Continuation see next page Lens plug for round lens, flush mounting for mounting and dismantling of Lens round, flush mounting e Lamp remover Continuation see next page Lamp remover e CAUTION A switching process might be released when replacing the Lamp/LED ! 25 07.2009 14 Accessories Enclosure Grey similar RAL 7035; cover lead-sealable Enclosure with mounting hole 1 x 22.5 mm dia., with anti-twist device with mounting hole 2 x 22.5 mm dia., with anti-twist device with mounting hole 3 x 22.5 mm dia., with anti-twist device with mounting hole 4 x 22.5 mm dia., with anti-twist device with mounting hole 6 x 22.5 mm dia., with anti-twist device Technical drawing Continuation see next page Dimension L 94 mm, W 94 mm, H 81 mm e Typ-Nr. 704.945.1 11 0.211 L 130 mm, W 94 mm, H 81 mm L 180 mm, W 94 mm, H 81 mm L 180 mm, W 182 mm, H 110 mm L 180 mm, W 182 mm, H 110 mm 704.945.2 704.945.3 704.945.4 704.945.5 12 13 14 15 0.251 0.313 0.572 0.568 Openings for cable gland M16 or M20. Protection class IP 66. Technical drawing from page 38 Cable gland Continuation see next page Cable gland M16, Plastic grey M20, Plastic grey with traction relief; protection degree IP 68. 26 07.2009 e Typ-Nr. 61-9481.6 0.007 704.945.6 0.011 14 Technical Data Actuator with snap-action switching element Electrical characteristics Standards The devices comply with : EN IEC 61058-1 Switching system Self-cleaning, double-break, snap action switching system (with contact gap 2 x 0.5 mm). 1 normally closed or 1 normally open contact per element. Snap-action switching elements with soldering terminals at the sides: up to 4 switching element can be on a pushbutton (max. 4 normally closed and 4 normally open contacts). Snap-action switching element with axial plug-in terminals 2.8 mm stackable, only 1 switching element can be on a pushbutton. Rated voltage 250 VAC/DC as per EN IEC 61058-1-15 Contact resistance New state 50 m as per DIN IEC 60512-2-4 Electrostatic discharge (ESD) Keylock switch 15 kV Rated current 5A Material Material of contact Gold plated silver Conventional free air thermal current Ith 5A The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values. Switch housing Plug-in-/soldering terminal Diallylphthalate DAP, Polyamide 66, Polysulfone, heat-resistant and self-extinguishing Soldering terminal: PA 6.6 Ultramide Actuator housing Polyamide Switch rating 250 VAC, 5 A (cos 1) 250 VAC, 3 A (cos 0,3) Switch rating AC (cos 0,7) 0 Voltage Current Mechanical characteristics Terminals Snap-action switching element with tinned soldering terminals at the sides: Max. wire diameter 2 wires a 1.2 mm max. wire cross-section of stranded cable 1x 1 mm Snap-action switching element with axial plug-in terminals, which can also be used as soldering terminals: Plug-in terminal 2.8 x 0.5 mm Soldering terminal: Max. wire diameter 2 wires of 1 mm Max. wire cross-section of stranded cable 2 x 0.75 mm or 1 x 1.0 mm Actuating torque Measured at the key or lever of the keylock- or selector switch 2.5 Ncm ... 5.5 Ncm, depending on the number of switching elements 125 VAC 3A 250 VAC 2A Switch rating DC (inductive) L:R = 30 ms 0 Voltage Current 24 VDC 2A 60 VDC 0.7 A 110 VDC 0.2 A 220 VDC 0.1 A Electric strength 3000 VAC, 50 Hz, 1 min. between all terminals and earth, as per EN IEC 61058-1-15 Isolation resistance >7 M between the opend contats at 500 VDC, as per EN IEC 61058-1-15 (reinforced insulation) Protection class II Environmental conditions Storage temperature -40 C ... +85 C Actuating force Maintain 5 N ... 7.8 N Momentary 3.2 N ... 6 N depending on the number of switching elements Service temperature -25 C ... +55 C For indicators and illuminated pushbuttons mounted as a block, make sure the heat can escape freely. Actuating travel Protection degree as per EN IEC 60529 front side IP 67 0 Illuminated pushbutton: 3 mm Switch actuator 2 positions: Momentary action 1 x ca. 42 deflection momentary action Maintained action 1 x ca. 90 deflection maintained action Rebound time 5ms Mechanical lifetime 0 Momentary action Maintained action 2 million 1 million Cycles of operation Cycles of operation Shock resistance (semi-sinusoidal) max. 150 m/s, pulse width 11 ms, 3-axis, as per EN IEC 60068-227 Vibration resistance (sinusoidal) max. 100 m/s at 10 Hz ... 500 Hz, as per EN IEC 60068-2-6 27 07.2009 14 Technical Data Climate resistance Damp heat state as per EN IEC 60068-2-30 Damp heat cyclic as per EN IEC 60068-2-78 Rebound time typical <100 s Mechanical lifetime Momentary action 5 million cycles of operation Maintained action 1 million cycles of operation Approvals Approbations CB (IEC 61058) CSA ENEC (EN 61058) Germanischer Lloyd UL Electrical characteristics Contact resistance New state 50 m as per DIN IEC 60512-2-4 Electrostatic discharge (ESD) Keylock switch 15 kV Declaration of conformity CE Switch rating 10 A, 100 V to 100 mA at 42 VAC/VDC > Actuator with low level switching element Electric strength 3000 VAC, 50 Hz, 1 min. between all terminals and earth, as per EN IEC 61058-1-15 Switching system This low level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few A/V up to 100 mA/42 VAC/ DC. Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contacts per switching element; combination of normally open and normally closed is possible. Special features are the long life, extremely short rebound time and stable contact resistance. Protection class II Environmental conditions Storage temperature -40 C ... +85 C Service temperature -25 C ... +55 C For indicators and illuminated pushbuttons mounted as a block, make sure the heat can escape freely. Material Material of contact Gold plated Protection degree as per EN IEC 60529 front side IP 67 Switch housing Polysulfone, heat-resistant and self-extinguishing Shock resistance (semi-sinusoidal) max. 150 m/s, pulse width 11 ms, 3-axis, as per EN IEC 60068-227 Actuator housing Polyamide Mechanical characteristics Terminals The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals. For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in. Soldering terminal: Max. wire diameter 2 wires of 1 mm Max. wire cross-section of stranded cable 2 x 0.75 mm Plug-in terminal: 2.0 x 0.5 mm. Actuating torque Measured at the key or lever of the keylock- or selector switch 2.5 Ncm ... 5.5 Ncm, depending on the number of switching elements Actuating force 3 ... 4 N, depending on the number of switching elements Actuating travel 0 Illuminated pushbutton : 3 mm Switch actuator 2 positions: Momentary action 1 x ca. 42 deflection momentary action Maintained action 1 x ca. 90 deflection maintained action 28 07.2009 > Buzzer Buzzer system System Piezo disc Material Alarm buzzer case Polyamide Front cap Plastic Polyamide Metal Nickel-plated brass (sea-water proof) Mechanical characteristics Terminals Plug-in terminal 2.8 x 0.5 mm Electrical characteristics Frequency (tone) approx. 2.8 kHz continuous tone only 14 Technical Data Sound pressure 95 db (A) 8 dB at a distance of 0.1 m Operation Voltage/Current 0 Operation Voltage Operation Current 24 VDC 10 % 25 mA Environmental conditions Storage temperature -40 C ... +85 C Operating temperature -25 C ... +55 C Protection degree as per EN IEC 60529, frontside IP 40, devices flush mounting IP 65, devices raised mounting Approvals Declaration of conformity CE 29 07.2009 Typical Applications Diode element When indicators and illuminated pushbuttons equipped with diodes, the user is able to perform a lamp check or wire an alarm circuit simply with a considerable saving of space. 0 30 07.2009 14 14 Application guidelines Suppressor circuits When switching inductive loads such as relays, DC motors, and DC solenoids, it is always important to absorb surges (e.g. with a diode) to protect the contacts. When these inductive loads are switched off, a counter emf can severely damage switch contacts and greatly shorten lifetime. Fig. 1 shows an inductive load with a free-wheeling diode connected in parallel. This free-wheeling diode provides a path for the inductor current to flow when the current is interrupted by the switch. Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric breakdown voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude even when nominal circuit voltages are low (e.g. 12 VDC) see Fig. 2. The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the voltage driving the inductive load. The DC blocking voltage (VR) of the free-wheeling diode can be found in the datasheet of a diode. The forward current should be equal or greater than the maximum current flowing through the load. To get an efficient protection, the free-wheeling diode must be connected as close as possible to the inductive load! 0 Counter emf over load without free-wheeling diode Fig. 2 Switching with inductive load Fig. 1 Switch ON OFF 0 VDC + _ Free-wheeling diode Inductive load Sveral hundred to several thousend volts e=L di __ dt 31 07.2009 14 Marking General notes 0 1. Engraving In addition to the most commonly used world languages, in DIN 1451-3 close spacing, other typefaces are available as Scandinavian, Slavic, Greek, Russian and Polish. The lenses are filled with black or white colour. Standard height of letters is 3 mm. If the height is not specified, we will supply 3 mm engraved letters. 2. Hot stamping Standard legends and ISO symbols are hot stamped. For larger series it is worth considering markings by means of hot stamping. We will pleased to advise you. > Engraving marking cap for Indicator round, full face illumination All dimensions in mm 0 Height of letters h 3 4 8 Number of lines 3 2 1 Number of (target value) letters per line b1 b2 11 10 8 7 4 - b3 9 - Line spacing d 4.6 6.6 - 0 The gap between 2 words results in each case a letter less. > Engraving marking cap for Indicator and illuminated Pushbutton round, front illumination All dimensions in mm 0 Height of letters h 3 4 8 Number of lines 3 2 1 Number of (target value) letters per line b1 b2 9 9 7 6 3 - 0 The gap between 2 words results in each case a letter less. > 32 07.2009 b3 7 - Line spacing d 4.6 6.6 - 14 Marking Engraving legend plates All dimensions in mm 0 Dimension 30 x 50 Devices mounting style round, raised 35 x 57.5 round, flush Height of letters h 3 4 8 3 4 8 Number of lines 2 1 1 2 1 1 Number of (target value) letters per line 12 7 4 12 7 4 Image B1 B1 B1 B2 B2 B2 0 B2 O30.5 O25 50 57.5 h B1 30 35 The gap between 2 words results in each case a letter less. > Standard texts for marking plates and marking caps for Indicator and Illuminated Pushbutton Height of letters 6 mm 0 33 07.2009 Marking > Symbols for marking plates and marking caps for Indicator and Illuminated Pushbutton 0 Continuation see next page > 34 07.2009 14 14 Marking Continued from previous page 0 35 07.2009 14 Drawings Component layout 1 PCB plug-in base page 22 Extendable mounting pins 3 4 2 1 a 9 4 3 b b 17.9 31 Switch a 42 9.6 17.9 1.27 O1.0 all holes 7.62 15.24 1.27 5 x 2.54 1.27 1.27 0.85 Drilling plan (conductor side) 2 Indicator actuator full face illumination page 6 | Indicator actuator front illumination page 6 | Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Keylock switch 2 positions page 11 | Selector switch 2 positions page 12 | Indicator actuator, flush mounting page 13 | Illuminated pushbutton actuator, flush mounting page 14 | Keylock switch actuator 2 positions, flush mounting page 15 | Selector switch actuator 2 positions, flush mounting page 16 Terminals (rearside) PCB layout (conductor side) 5.08 3.81 O1.0 all holes 2.54 7.62 1 3 a b 2 4 10.16 3 PCB plug-in base page 22 3.81 3.81 O1.0 O2.1 hole for central mounting with M2 screw, if desired 12.7 36 07.2009 10.16 5.08 all holes 14 Drawings 4 PCB plug-in base page 22 7.62 O2.1 hole for central mounting with M2 screw, if desired 10.16 3.81 7.62 3.81 + 0.1 O1.0 0 all holes Mounting dimensions 30 .5 +0 0 .3 35 min. 1 Indicator actuator, flush mounting page 13 | Buzzer, flush mounting page 13 | Illuminated pushbutton actuator, flush mounting page 14 | Keylock switch actuator 2 positions, flush mounting page 15 | Selector switch actuator 2 positions, flush mounting page 16 | Front bezel set, flush mounting page 20 35 min. Hole spacing 37 mm min. by using blind plug 704.960.8 min. 42 2 Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 .5 +0 0 5 . 22 min. 42 3 Positioning insert page 25 +0.2 0 .4 +0 0 3.2 30 min. R0.8 max. 3 . 22 24.1 +0.4 0 30 min. 37 07.2009 14 Drawings 30 .5 +0 0 .3 50 min. 4 Front bezel set for Mushroom-head pushbutton page 19 50 min. 5 Indicator actuator full face illumination page 6 | Indicator actuator front illumination page 6 | Buzzer page 7 | Illuminated actuator pushbutton page 8 | Keylock switch 2 positions page 11 | Selector switch 2 positions page 12 2.9 - 0.1 0 30 min. 30 min. .2 +0 0 .2 +0 0 5 2. .2 +0 0 4 2. 2 5 2 21.3 30 min. 30 min. Hole spacing 31 mm min. by using blind plug 704.960.4 Technical drawing 1 Buzzer page 7 35.5 29 26.5 2 ... 6 10 38 07.2009 30 2.8 x 0.5 13.5 for devices selector switch long lever 50 min. for devices with anti-twist device (rotary) (recommended for keylock switch) for devices without anti-twist device +0.2 0 . 22 42 min. 14 Drawings 2 Blind plug page 22 3 Blind plug page 22 20 O30 4.8 2.5...6 28 4 Protective cover, raised mounting page 20 Front panel thickness reduces by 3.5 mm to max. 4.5 mm 5 Protective cover, flush mounting page 21 Front panel thickness reduces by 2.5 mm to max. 3.5 mm 6 Protective cover, raised mounting page 20 Front panel thickness reduces by 3.5 mm to max. 4.5 mm 39 07.2009 14 Drawings 7 Protective cover, flush mounting page 21 Front panel thickness reduces by 2.5 mm to max. 3.5 mm 8 Protective cover, flush mounting page 21 Front panel thickness reduces by 2.5 mm to max. 3.5 mm 23.5 O22.5 50 14.5 4 9 Legend frame page 20 30 14.5 4 10 Legend frame page 20 O30.5 57.5 23.5 35 40 07.2009 14 Drawings 81 11 Enclosure page 26 79 50 94 94 50 79 81 12 Enclosure page 26 130 79 50 94 50 90 115 41 07.2009 14 Drawings 81 13 Enclosure page 26 180 50 120 165 111 14 Enclosure page 26 50 120 167 42 07.2009 120 165 50 180 182 79 94 100 14 Drawings 111 15 Enclosure page 26 182 50 165 50 120 180 50 120 167 16 Buzzer, flush mounting page 13 46.5 35 37.5 30 2.8 x 0.5 2 ... 6 10 2 43 07.2009 14 Drawings 17 Indicator actuator full face illumination page 6 Universal terminal Universal terminal + diodes L L1 U U+D 30 33 44.5 2.8 x 0.5 1.5 ... 7 3 30 3 L1 13.5 U U+D Soldering terminal (also pluggable) Soldering terminal 29 1D, 2D 44.5 L 18 Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 L1 28 U U+D L1 44 07.2009 U Unversal terminal 30 3 Soldering terminal (also pluggable) 2.8 x 0.5 1.5 ... 7 Soldering terminal 29 L L L1 U U+D 1NC+1NO 37.5 45.5 - - 2NC+2NO 45 - - - 3NC+3NO 52.5 - - - 4NC+4NO 60 - - - 1NC+1NO+D - - - 52 2NC+2NO+D - - - 60 44.5 - 1NC, 1NO, 1NC+1NO, 2NC, 2NO L 19 Indicator actuator front illumination page 6 13.5 Universal terminal + diode 30 3 Universal terminal Soldering terminal 2.8 x 0.5 1.5 ... 7 Soldering terminal (also pluggable) 40 13.5 L L1 U 37.5 45.5 44.5 14 Drawings Soldering terminal (also pluggable) Universal terminal Universal terminal + diode Soldering terminal 20 Illuminated actuator pushbutton page 8 L L1 U U+D 1NC+1NO 37.5 45.5 - - 2NC+2NO 45 - - - 3NC+3NO 52.5 - - - 4NC+4NO 29 2.8 x 0.5 1.5 ... 7 30 3 L1 13.5 U U+D 60 - - - 1NC+1NO+D - - - 52 2NC+2NO+D - - - 60 44.5 - 1NC, 1NO, 1NC+1NO, 2NC, 2NO L 21 Keylock switch 2 positions page 11 L L1 U 35.5 45.5 2NC+2NO 43 - - 3NC+3NO 50.5 - - 4NC+4NO 58 - 3 30 1NC+1NO L1 38 Unversal terminal Soldering terminal 2.8 x 0.5 1.5 ... 7 Soldering terminal (also pluggable) 29 13.5 U - 1NC, 1NO, 1NC+1NO, 2NC, 2NO 44.5 L 22 Selector switch 2 positions page 12 27 L L1 U 1NC+1NO 35.5 45.5 - 2NC+2NO 43 - - 3NC+3NO 50.5 - - 4NC+4NO 58 - 3 30 L1 Unversal terminal Soldering terminal 2.8 x 0.5 1.5 ... 7 Soldering terminal (also pluggable) 29 13.5 U 1NC, 1NO, 1NC+1NO, 2NC, 2NO 44.5 L 45 07.2009 14 Drawings 23 Selector switch 2 positions page 12 L L1 U 35.5 45.5 2NC+2NO 43 - - 3NC+3NO 50.5 - - 4NC+4NO 58 - 3 30 1NC+1NO L1 27 Universal terminal Soldering terminal 2.8 x 0.5 1.5 ... 7 Soldering terminal (also pluggable) 29 13.5 U - 1NC, 1NO, 1NC+1NO, 2NC, 2NO 44.5 L 24 Indicator actuator, flush mounting page 13 O 35 3 L1 2 U Universal terminal 2.8 x 0.5 1.5 ... 6 Soldering terminal (also pluggable) Soldering terminal 35 L L1 U 48.5 56.5 55.5 L 25 Illuminated pushbutton actuator, flush mounting page 14 Soldering terminal (also pluggable) Universal terminal Universal terminal + diode Soldering terminal 35 L L1 U U+D 1NC+1NO 48.5 56 - - 2NC+2NO 56 - - - 3NC+3NO 63.5 - - - 4NC+4NO 2.8 x 0.5 1.5 ... 6 O 35 3 L1 U U+D 71 - - - 1NC+1NO+D - - - 63.5 2NC+2NO+D - - - 71 55,5 - 1NC, 1NO, 1NC+1NO, 2NC, 2NO 2 L 46 07.2009 14 Drawings 26 Keylock switch actuator 2 positions, flush mounting page 15 2 Soldering terminal (also pluggable) Universal terminal Soldering terminal 35 L L1 U 1NC+1NO 46.5 56 - 2NC+2NO 54 - - 3NC+3NO 61.5 - - 4NC+4NO 69 - 2.8 x 0.5 1.5 ... 6 O 35 3 L1 27 U - 1NC+1NO, 2NO 55.5 L 27 Selector switch actuator 2 positions, flush mounting page 16 2 Soldering terminal (also pluggable) Universal terminal Soldering terminal 35 L L1 U 46.5 56 2NC+2NO 54 - - 3NC+3NO 61.5 - - 4NC+4NO 69 - 2.8 x 0.5 1.5 ... 6 3 O 35 1NC+1NO L1 15.5 U 1NC+1NO, 2NC, 2NO 55.5 L 28 Front bezel set for Mushroom-head pushbutton page 19 50 11 Soldering terminal (also pluggable) Universal terminal Universal terminal + diode Soldering terminal 40 L L1 U U+D 1NC+1NO 48.5 56 - - 2NC+2NO 56 - - - 3NC+3NO 63.5 - - - 4NC+4NO 2.8 x 0.5 1.5 ... 6 O 35 3 L1 13.5 U U+D 71 - - - 1NC+1NO+D - - - 63.5 2NC+2NO+D - - - 71 55,5 - 1NC, 1NO, 1NC+1NO, 2NC, 2NO L 47 07.2009 14 Drawings Circuit drawing 1 Buzzer page 7 | Buzzer, flush mounting page 13 x1+ x2- 2 Indicator actuator full face illumination page 6 | Indicator actuator front illumination page 6 | Indicator actuator, flush mounting page 13 a-(x1) b+(x2) 3 Indicator actuator full face illumination page 6 | Indicator actuator front illumination page 6 | Indicator actuator, flush mounting page 13 4 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 1 2 1 3 4 2 1 3 2 4 3 x1- 4 x2+ IV III II I 2 4 5 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 1 I 2 3 1 II 4 2 3 x1- 4 x2+ III 2 4 6 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 1 2 3 a- 3(+) 4 b+ 4(-) II I 4 2 7 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 1 2 3 a- 3(+) 1(-) 4 b+ 4(-) 2(+) II I 4 48 07.2009 2 14 Drawings 8 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 1 3 2 3 x1- 4 x2+ II I 2 4 9 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 a- 3(+) 4 b+ 4(-) I 2 10 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 a- 3(+) 1(-) 4 b+ 4(-) 2(+) I 2 11 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 x1- 4 x2+ I 2 12 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 a- 2 b+ 13 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 a- 2 4 b+ 14 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 a- 2 b+ 49 07.2009 14 Drawings 15 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 a- 2 4 b+ 16 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 a- 2 4 b+ 17 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 I 2 4 18 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 1 2 3 II I 4 2 4 19 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 1 2 3 1 4 2 3 III II I 4 2 4 20 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 1 2 3 1 4 2 3 1 4 2 3 IV III II I 4 2 4 21 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 50 07.2009 1 3 2 4 14 Drawings 22 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 2 4 23 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 2 4 24 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 I 2 4 25 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 1 2 3 II I 4 2 4 26 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 1 I 2 3 1 II 4 2 3 III 4 2 4 27 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 1 I 2 3 1 II 4 2 3 1 III 4 2 3 IV 4 2 4 28 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 2 4 29 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 2 4 51 07.2009 14 Drawings 30 Selector switch 2 positions page 12 | Selector switch actuator 2 positions, flush mounting page 16 1 3 2 4 31 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 1 3 2 1 3 2 4 1 3 2 4 3 x1- 4 x2+ IV III II I 2 4 32 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 1 3 2 1 3 2 4 3 x1- 4 x2+ III II I 2 4 33 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 1 3 2 3 a- 3(+) 4 b+ 4(-) II I 2 4 34 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 1 3 2 3 a- 3(+) 1(-) 4 b+ 4(-) 2(+) II I 2 4 35 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 1 3 2 3 x1- 4 x2+ II I 2 4 36 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 a- 3(+) 4 b+ 4(-) I 2 52 07.2009 Drawings 1 4 37 Illuminated actuator pushbutton page 8 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 a- 3(+) 1(-) 4 b+ 4(-) 2(+) I 2 38 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 x1- 4 x2+ I 2 39 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 a- 2 b+ 40 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 a- 2 4 b+ 41 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 a- 2 b+ 42 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 a- 2 4 b+ 43 Illuminated actuator pushbutton page 8 | Mushroom-head actuator pushbutton page 9 | Illuminated mushroom-head actuator pushbutton page 10 | Illuminated pushbutton actuator, flush mounting page 14 1 3 a- 2 4 b+ 53 07.2009 14 Drawings 44 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15 1 3 I 2 4 45 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15 1 3 1 I 2 3 II 4 2 4 46 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15 1 3 1 2 3 1 4 2 3 III II I 4 2 4 47 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15 1 3 1 2 3 1 4 2 3 1 4 2 3 IV III II I 4 2 4 48 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15 1 3 2 4 49 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15 1 3 2 4 50 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15 1 3 I 2 4 51 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15 1 3 1 2 54 07.2009 3 II I 4 2 4 14 Drawings 52 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15 1 3 1 I 2 3 1 II 4 2 3 III 4 2 4 53 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15 1 3 1 I 2 3 1 II 4 2 3 1 III 4 2 3 IV 4 2 4 54 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15 1 3 2 4 55 Keylock switch 2 positions page 11 | Keylock switch actuator 2 positions, flush mounting page 15 1 3 2 4 56 Indicator actuator full face illumination page 6 a-(x1) 3(+) b+(x2) 4(-) 57 Indicator actuator full face illumination page 6 a-(x1) 3(+) 1(-) b+(x2) 4(-) 2(+) 55 07.2009 Index from Typ-Nr. Typ-Nr. Page 01-928 ........................................23 01-929 ........................................23 02-906 ........................................25 02-912.1 .....................................24 02-912.2 .....................................24 02-912.3 .....................................24 02-912.4 .....................................24 10-1106.1369 .............................23 10-1109.1279 .............................23 10-1109.1329 .............................23 10-1112.1199 .............................23 10-1112.1279 .............................23 10-1113.1249 .............................23 10-1114.1249 .............................23 10-1116.1229 .............................23 10-1119.1199 .............................23 10-2106.3142 .............................24 10-2106.3144 .............................24 10-2106.3145 .............................24 10-2106.3146 .............................24 10-2106.3149 .............................24 10-2109.1062 .............................24 10-2109.1064 .............................24 10-2109.1065 .............................24 10-2109.1066 .............................24 10-2109.1069 .............................24 10-2112.1062 .............................24 10-2112.1064 .............................24 10-2112.1065 .............................24 10-2112.1066 .............................24 10-2112.1069 .............................24 10-2113.1062 .............................24 10-2113.1064 .............................24 10-2113.1065 .............................24 10-2113.1066 .............................24 10-2113.1069 .............................24 10-2119.1042 .............................24 10-2119.1044 .............................24 10-2119.1045 .............................24 10-2119.1046 .............................24 10-2119.1049 .............................24 14-030.002 ...................................6 14-030.005 ...................................6 14-031.006 ...................................6 14-040.002 .................................13 14-040.002 ...................................6 14-040.005 .................................13 14-040.005 ...................................6 14-041.006 .................................13 14-041.006 ...................................6 14-131.022 .................................10 14-131.022 .................................14 14-131.022 ...................................8 14-131.022 ...................................9 14-131.0252 ...............................10 14-131.0252 ...............................14 14-131.0252 .................................8 14-131.0252 .................................9 14-132.0252 ...............................10 14-132.0252 ...............................14 14-132.0252 .................................8 14-132.0252 .................................9 14-133.0252 ...............................10 56 08.2009 Typ-Nr. Page 14-133.0252 ...............................14 14-133.0252 .................................8 14-133.0252 .................................9 14-134.0252 ...............................10 14-134.0252 ...............................14 14-134.0252 .................................8 14-134.0252 .................................9 14-135.022K ...............................11 14-135.022K ...............................15 14-135.025K2 .............................11 14-135.025K2 .............................15 14-136.025K2 .............................11 14-136.025K2 .............................15 14-137.025K2 .............................11 14-137.025K2 .............................15 14-138.025K2 .............................11 14-138.025K2 .............................15 14-141.022K ...............................11 14-141.022K ...............................15 14-141.025K2 .............................11 14-141.025K2 .............................15 14-142.025K2 .............................11 14-142.025K2 .............................15 14-143.025K2 .............................11 14-143.025K2 .............................15 14-144.025K2 .............................11 14-144.025K2 .............................15 14-235.022K ...............................11 14-235.022K ...............................15 14-235.025K2 .............................11 14-235.025K2 .............................15 14-236.025K2 .............................11 14-236.025K2 .............................15 14-237.025K2 .............................11 14-237.025K2 .............................15 14-238.025K2 .............................11 14-238.025K2 .............................15 14-271.022 .................................10 14-271.022 .................................14 14-271.022 ...................................8 14-271.022 ...................................9 14-271.0252 ...............................10 14-271.0252 ...............................14 14-271.0252 .................................8 14-271.0252 .................................9 14-272.0252 ...............................10 14-272.0252 ...............................14 14-272.0252 .................................8 14-272.0252 .................................9 14-273.0252 ...............................10 14-273.0252 ...............................14 14-273.0252 .................................8 14-273.0252 .................................9 14-274.0252 ...............................10 14-274.0252 ...............................14 14-274.0252 .................................8 14-274.0252 .................................9 14-335.022K ...............................11 14-335.022K ...............................15 14-335.025K2 .............................11 14-335.025K2 .............................15 14-336.025K2 .............................11 14-336.025K2 .............................15 Typ-Nr. Page 14-337.025K2 .............................11 14-337.025K2 .............................15 14-338.025K2 .............................11 14-338.025K2 .............................15 14-411.036K ...............................11 14-411.036K ...............................15 14-412.036K ...............................11 14-412.036K ...............................15 14-414.036K ...............................11 14-414.036K ...............................15 14-415.036K ...............................11 14-415.036K ...............................15 14-417.036K ...............................11 14-417.036K ...............................15 14-418.036K ...............................11 14-418.036K ...............................15 14-431.036 .................................10 14-431.036 .................................14 14-431.036 ...................................8 14-431.036 ...................................9 14-432.036 .................................10 14-432.036 .................................14 14-432.036 ...................................8 14-432.036 ...................................9 14-433.036 .................................10 14-433.036 .................................14 14-433.036 ...................................8 14-433.036 ...................................9 14-435.036 .................................10 14-435.036 .................................14 14-435.036 ...................................8 14-435.036 ...................................9 14-436.036 .................................10 14-436.036 .................................14 14-436.036 ...................................8 14-436.036 ...................................9 14-437.036K ...............................11 14-437.036K ...............................15 14-438.036K ...............................11 14-438.036K ...............................15 14-471.036 .................................10 14-471.036 .................................14 14-471.036 ...................................8 14-471.036 ...................................9 14-472.036 .................................10 14-472.036 .................................14 14-472.036 ...................................8 14-472.036 ...................................9 14-473.036 .................................10 14-473.036 .................................14 14-473.036 ...................................8 14-473.036 ...................................9 14-475.036 .................................10 14-475.036 .................................14 14-475.036 ...................................8 14-475.036 ...................................9 14-476.036 .................................10 14-476.036 .................................14 14-476.036 ...................................8 14-476.036 ...................................9 14-501.0220 ...............................12 14-501.0220 ...............................16 14-501.02502 .............................12 Index from Typ-Nr. Typ-Nr. Page 14-501.02502 ............................. 16 14-502.02502 ............................. 12 14-502.02502 ............................. 16 14-503.02502 ............................. 12 14-503.02502 ............................. 16 14-504.02502 ............................. 12 14-504.02502 ............................. 16 14-506.0220 ............................... 12 14-506.0220 ............................... 16 14-506.02502 ............................. 12 14-506.02502 ............................. 16 14-507.02502 ............................. 12 14-507.02502 ............................. 16 14-508.02502 ............................. 12 14-508.02502 ............................. 16 14-509.02502 ............................. 12 14-509.02502 ............................. 16 14-515.0360 ............................... 12 14-515.0360 ............................... 16 14-516.0360 ............................... 12 14-516.0360 ............................... 16 14-517.0360 ............................... 12 14-517.0360 ............................... 16 14-520.0360 ............................... 12 14-520.0360 ............................... 16 14-521.0360 ............................... 12 14-521.0360 ............................... 16 14-522.0360 ............................... 12 14-522.0360 ............................... 16 14-551.0220 ............................... 12 14-551.02502 ............................. 12 14-552.02502 ............................. 12 14-553.02502 ............................. 12 14-554.02502 ............................. 12 14-556.0220 ............................... 12 14-556.02502 ............................. 12 14-557.02502 ............................. 12 14-558.02502 ............................. 12 14-559.02502 ............................. 12 14-565.0360 ............................... 12 14-566.0360 ............................... 12 14-567.0360 ............................... 12 14-570.0360 ............................... 12 14-571.0360 ............................... 12 14-572.0360 ............................... 12 14-741.006 ................................... 6 14-742.006 ................................... 6 14-743.0292 ............................... 10 14-743.0292 ............................... 14 14-743.0292 ................................. 8 14-744.0292 ............................... 10 14-744.0292 ............................... 14 14-744.0292 ................................. 8 14-745.0292 ............................... 10 14-745.0292 ............................... 14 14-745.0292 ................................. 8 14-746.0292 ............................... 10 14-746.0292 ............................... 14 14-746.0292 ................................. 8 14-747.0292 ............................... 10 14-747.0292 ............................... 14 14-747.0292 ................................. 8 14-748.0292 ............................... 10 Typ-Nr. Page 14-748.0292 ............................... 14 14-748.0292 ................................. 8 14-749.0292 ............................... 10 14-749.0292 ............................... 14 14-749.0292 ................................. 8 14-750.0292 ............................... 10 14-750.0292 ............................... 14 14-750.0292 ................................. 8 14-810.002 ................................... 7 14-810.902 ................................... 7 14-810.910 ................................. 13 14-810.918 ................................. 13 14-910 ........................................ 25 14-958.0 ..................................... 19 14-958.8 ..................................... 19 14-987.1001 ............................... 22 31-928 ........................................ 23 31-929 ........................................ 23 31-940 ........................................ 22 31-941 ........................................ 22 31-942 ........................................ 22 31-945 ........................................ 22 31-946 ........................................ 22 61-9481.6 ................................... 26 700.006.0 ................................... 25 704.600.0 ................................... 19 704.600.1 ................................... 19 704.600.1A ................................. 19 704.600.2 ................................... 21 704.600.3 ................................... 21 704.600.5/A ................................ 21 704.600.6 ................................... 19 704.600.9 ................................... 19 704.601.0 ................................... 17 704.601.01 ................................. 17 704.601.2 ................................... 17 704.601.21 ................................. 17 704.601.4 ................................... 17 704.601.41 ................................. 17 704.601.5 ................................... 17 704.601.51 ................................. 17 704.601.6 ................................... 17 704.601.61 ................................. 17 704.601.8 ................................... 17 704.601.81 ................................. 17 704.601.9 ................................... 17 704.601.91 ................................. 17 704.602.0 ................................... 17 704.602.2 ................................... 17 704.602.4 ................................... 17 704.602.5 ................................... 17 704.602.6 ................................... 17 704.602.7 ................................... 17 704.603.2 ................................... 18 704.603.4 ................................... 18 704.603.5 ................................... 18 704.603.6 ................................... 18 704.603.7 ................................... 18 704.604.0 ................................... 18 704.604.2 ................................... 18 704.604.4 ................................... 18 704.604.5 ................................... 18 704.608.7 ................................... 19 Typ-Nr. Page 704.608.9 ................................... 19 704.609.0 ................................... 18 704.609.7 ................................... 18 704.609.9 ................................... 18 704.609.9 ................................... 18 704.610.7 ................................... 19 704.610.9 ................................... 19 704.611.2 ................................... 17 704.611.4 ................................... 17 704.611.5 ................................... 17 704.611.7 ................................... 17 704.614.2 ................................... 18 704.614.4 ................................... 18 704.614.5 ................................... 18 704.614.6 ................................... 18 704.614.7 ................................... 18 704.925.0 ................................... 20 704.925.2 ................................... 20 704.925.3 ................................... 20 704.928.18 ................................. 21 704.928.28 ................................. 21 704.928.38 ................................. 21 704.945.1 ................................... 26 704.945.2 ................................... 26 704.945.3 ................................... 26 704.945.4 ................................... 26 704.945.5 ................................... 26 704.945.6 ................................... 26 704.953.0 ................................... 21 704.954.0 ................................... 25 704.955.0 ................................... 20 704.955.1 ................................... 20 704.955.3 ................................... 21 704.955.4 ................................... 21 704.955.9 ................................... 20 704.955.9E ................................. 21 704.960.0 ................................... 25 704.960.4 ................................... 22 704.960.8 ................................... 25 704.964.8 ................................... 22 704.968.0 ................................... 20 704.968.1 ................................... 20 704.968.2 ................................... 20 704.968.3 ................................... 20 57 08.2009 Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail EAO reserves the right to alter specifications without further notice E-mail Website EAO AG Tannwaldstrasse 88 4601 Olten, Switzerland info@eao.com www.eao.com Austria +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Belgium +32 3 777 82 36 +32 3 777 84 19 sales.ebl@eao.com China +852 27 86 91 41 +852 27 86 95 61 sales.ehk@eao.com France +33 1 64 43 37 37 +33 1 64 43 37 49 sales.ese@eao.com Germany +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Italy +39 035 481 0189 +39 035 481 3786 sales.eit@eao.com Japan +81 3 5444 5411 +81 3 5444 0345 sales.esj@eao.com Netherlands +31 78 653 17 00 +31 78 653 17 99 sales.enl@eao.com Sweden +46 8 683 86 60 +46 8 724 29 12 sales.esw@eao.com Switzerland +41 62 388 95 00 +41 62 388 95 55 sales.ech@eao.com United Kingdom +44 1444 236 000 +44 1444 236 641 sales.euk@eao.com USA +1 203 877 4577 +1 203 877 3694 sales.eus@eao.com Other Countries +41 62 286 92 10 +41 62 296 21 62 info@eao.com