TEN 60-4811WIN - TRACOPOWER

http://www.tracopower.com Page 1 of 4

DC/DC Converters

TEN 60WIN Series, 60 Watt

Features

◆ 2” x 1” metal package

◆ Wide 4:1 input voltage range

9–36, 18–75 VDC

◆ High efﬁciency up to 92%

◆ Adjustable output voltage

◆ No minimum load required

◆ Operating temperature range

–40°C to +85°C

◆ Input ﬁlter to meet EN55022, class A

◆ Remote On/Off

◆ Under voltage lockout

◆ Lead free design, RoHS compliant

◆ 3-year product warranty

The TEN 60WIN series is a family of high performance 60 Watt dc/dc converter

modules featuring ultra wide 4:1 input voltage ranges in a six side shielded 2” x 1”

metal package with industry standard footprint. Standard features include remote

On/Off, over voltage protection, under voltage lockout and short circuit protection.

High efﬁciency across load range and low input current characteristics at no load

make these converters the ideal solution for battery-operated systems. Typical ap-

plications are in wireless networks, telecom/datacom, industry control systems and

measurement equipment.

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

TEN 60-2411WIN 5.0 VDC 12‘000 mA 92 %

TEN 60-2412WIN 9 – 36 VDC 12 VDC 5000 mA 92 %

TEN 60-2413WIN (24 VDC nominal) 15 VDC 4000 mA 92 %

TEN 60-2415WIN 24 VDC 2500 mA 92 %

TEN 60-2422WIN ±12 VDC ±2500 mA 91 %

TEN 60-2423WIN ±15 VDC ±2000 mA 91 %

TEN 60-4811WIN 5.0 VDC 12‘000 mA 92 %

TEN 60-4812WIN 18 – 75 VDC 12 VDC 5000 mA 92 %

TEN 60-4813WIN (48 VDC nominal) 15 VDC 4000 mA 92 %

TEN 60-4815WIN 24 VDC 2500 mA 91 %

TEN 60-4822WIN ±12 VDC ±2500 mA 91 %

TEN 60-4823WIN ±15 VDC ±2000 mA 91 %

Models

Scheme

UL 60950-1UL 60950-1

pending

http://www.tracopower.com Page 2 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

TEN 60WIN Series 60 Watt

Input Specifications

Input current (no load) 10 mA typ.

Start-up voltage 24 Vin models: < 9.0 VDC

48 Vin models: < 18 VDC

Under voltage shut down (lock-out circuit) 24 Vin models: 8.0 VDC typ.

48 Vin models: 16 VDC typ.

Surge voltage (1 sec.) 24 Vin models: 50 V max.

48 Vin models: 100 V max.

Conducted noise EN 55022 class A with external components

filter proposal to be adviced

ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

Radiated immunity EN 61000-4-3, 20 V/m, perf. criteria A

Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A

EN 61000-4-5, ±2 kV perf. criteria A

– external input capacitor 24 Vin models:

Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm

and TVS 58V, 3000W peak (SMDJ58A) in parallel

48 Vin models:

Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm

and TVS 120V, 3000W peak (SMDJ120A) in parallel

Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

Output Specifications

Voltage set accuracy ±1 %

Voltage adjustment range (single output models only) 15 & 24 VDC models: +20%, -10%

other models: ±10 %

Regulation – Input variation Vin min. to Vin max. 0.2 % max.

– Load variation 0 – 100 % single output models: 0.5 % max.

dual output models: 1 % max.

– Load cross variation 25 % / 100 % 5 % max.

Minimum load not required

Temperature coefficient ±0.02 %/K

Ripple and noise (20 MHz bandwidth) 5.0 VDC: 100 mVp-p max.

with 10µF/25V X7R MLCC

12 & 15 VDC: 125 mVp-p max.

with 10µF/25V X7R MLCC

24 VDC: 200 mVp-p max.

with 4.7µF/50V X7R MLCC

Start up time – Power On 60 ms typ.

(constant resistive load) – Remote On 60 ms typ.

Transient response (25% load step change) 250 µs typ.

Short circuit protection continuous, automatic recovery

Over load protection 150 % of Iout max. typ. hiccup

Over-voltage protection (Zener diode, single output models only) 5 VDC models: 6.2 V

12 VDC models: 15 V

15 VDC models: 20 V

24 VDC models: 30 V

Capacitive load (max. values) 5.0 VDC models: 30’000 µF

12 VDC models: 5850 µF

15 VDC models: 3900 µF

24 VDC models: 2000 µF

±12 VDC models: 3900 µF (each output)

±15 VDC models: 2400 µF (each output)

http://www.tracopower.com Page 3 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

TEN 60WIN Series 60 Watt

General Specifications

Temperature ranges – Operating –40°C to +85°C (with derating)

– Casing temperature +105°C max.

– Storage –55°C to +125°C

Power derating – Natural convection 2.5 %/K above 50°C

– Natural convection with heat sink (optional) 2.25 %/K above 55°C

Thermal impedance – Natural convection 10.8 K/W

– Natural convection with heat sink (optional) 10.3 K/W

Over-temperatur protection at 115°C

Humidity (non condensing) 5 – 95 % rel. H

Isolation voltage (60 sec.) – Input / Output 1500 VDC

Isolation resistance – Input / Output >1 GOhm

Isolation capacitance – Input / Output 2’200 pF max.

Switching frequency 250 kHz typ. (pulse width modulation PWM)

Thermal shock, mechanical shock & vibration MIL-STD-810F

– Test conditions www.tracopower.com/products/mil810.pdf

Safety standards UL/cUL 60950-1, IEC/EN 60950-1

Safety approvals – UL/cUL (entry pending) www.ul.com -> certifications -> File e188913

Remote On/Off – On: 3.0 ... 12 VDC or open circuit

– Off: 0 ... 1.2 VDC or short circuit pin 2 and pin 6

– Off idle current: 3.0 mA

Reliability, calculated MTBF (Telcordia SR-332, 50% stress, Ta=40°C) 2.6 Mio. h

Environmental compliance – Reach

www.tracopower.com/products/reach-declaration.pdf

– RoHS RoHS directive 2002/95/EC

Application note: www.tracopower.com/products/ten60win-application.pdf

Output Voltage Adjustment (for single output models only)

Trim

+Vout

Trim

Vout

Trim up Trim down

Nominal output voltage at open Trim input

Ru, Rd for adjustment to be adviced

pending

Page 4 of 4

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

Physical Specifications

Casing material copper

Baseplate material non conductive FR4

Potting material silicon (UL94V-0 rated)

Weight 33 g (1.16 oz )

Soldering temperature max. +265°C / 10 sec.

DC/DC Converters

TEN 60WIN Series 60 Watt

Outline Dimensions

Rev. August 5. 2013

56.0 (2.2) max.

14.5 (0.57)

16.8 (0.66)

max.

Converter

Heat-sink

Thermal pad

Clamp

Note:

Before attaching the heatsink, the product

label on converter has to be removed for

optimal performance.

For volume orders we can supply the

converters with heatsink already mounted.

Please contact us for a relative quotation.

Order code: TEN-HS1

(cont.: heat-sink, thermal pad, 2 clamps)

Material: Aluminum

Finish: Anodic treatment (black)

Weight: 17g (0.60oz) without converter

Thermal impedance after assembling: 10.3 K/W

Pin Single Dual

1+Vin (Vcc) +Vin (Vcc)

2–Vin (GND) –Vin (GND)

3Remote On/Off

4+Vout +Vout

5–Vout Common

6TRIM –Vout

Pin-Out

Dimensions in [mm], () = Inch

Pin diameter: 1.0 ±0.1 (0.04 ±0.004)

Pin pitch tolerances: ±0.25 (±0.01)

Case tolerances: ±0.5 (±0.02)

10.2

5.6

50.8

(2.0)

(0.4)

(0.22)

Bottom View

45.72

(1.8)

2.54

(0.1)

5.08

(0.2)

10.16

(0.4)

10.16

(0.4)

20.32

(0.8)

25.4

(1.0)

2.54 (0.1)

2.54

(0.1)

Dimensions in mm, () = Inch

Heat-Sink (Option)