------------------------------------------------------------------------- G065VN01 V2 All information is subject to change without notice (Preliminary) G065VN01 V2 Color TFT-LCD Module (HMI, FA, IPC, POS, KIOSK, Gaming, Medical.. etc.) Size (inch) 6.5" G065VN01 V2 VGA resolution LED BLU driver built-in Resolution (pixel) 640RGB(H)x480(V) Long LED life time Active Area (mm) 132.48(H) x 99.36(V) Wide dimming range support Pixel Pitch (mm) 0.207 x 0.207 Replaceable LED light bar Wide operation temperature Mode LCD Surface Number of Colors Reverse scan 6/8 bit convertible RoHS and Halogen-free compliance Min. 3 years product life support Model View Angle (H/V) Brightness(nit) Contrast Ratio Response Time (ms) LED Life (hrs.) * CS: 05/M' 2009 * MP: 06/M' 2009 2.9 (max) All black pattern LCD Supply Voltage (V) Storage Temp. ( ) Operation Temp. ( ) 3.3 -30 ~ +85 -30 ~ +85 Outline Dimension (mm) Weight (g) Interface 153.0 x 121.0 x 10.9 170 LVDS * ES: 04/M' 2009 160/140 500 800:1 25 50K Power Consumption (W) Sample Schedule: TN, Normal White AG 262K/16.2M ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP. 1/5 Version 0.3, Dec. 2008 ------------------------------------------------------------------------- G065VN01 V2 All information is subject to change without notice (Preliminary) Outline dimension ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP. 2/5 Version 0.3, Dec. 2008 ------------------------------------------------------------------------- G065VN01 V2 All information is subject to change without notice (Preliminary) CN1 pin assignment (LCD) Connecter: 20268-020E-12F (I-PEX or compatible) Mating Connecter: 20230-020B or 20230-T20-F or 20230-W20B-F (I-PEX or compatible) Pin No. Symbol Pin Description 1 VDD Power supply, 3.3V (typical) 2 VDD Power supply, 3.3V (typical) 3 GND Ground 4 GND Ground 5 RxIN0- Negative LVDS differential input(R0-R5, G0) 6 RxIN0+ Positive LVDS differential input(R0-R5, G0) 7 GND 8 RxIN1- Negative LVDS differential input(G1-G5, B0-B1) 9 RxIN1+ Positive LVDS differential input(G1-G5, B0-B1) 10 GND 11 RxIN2- Negative LVDS differential input(B2-B5, Hsync, Vsync, DE) 12 RxIN2+ Positive LVDS differential input(B2-B5, Hsync, Vsync, DE) 13 GND 14 RxCLKIN- Negative LVDS differential clock input 15 RxCLKIN+ Positive LVDS differential clock input 16 SEL68 Selection for either 6bit or 8bit LVDS input: SEL68 ="High" or "NC", accepts 6bit LVDS data input; SEL68 = "Low", accepts 8bit LVDS data input. 17 U/D Vertical Reverse ("L" or Open: Normal, "H": Reverse) 18 L/R Horizontal Reverse ("L" or Open: Normal, "H": Reverse) 19 RxIN3- 20 RxIN3+ Ground Ground Ground Negative LVDS differential input (R6-R7, G6-G7, B6-B7) NC for 6bit LVDS input. Positive LVDS differential input (R6-R7, G6-G7, B6-B7) NC for 6bit LVDS input. CN2 pin assignment (LED) Connecter: 53261-0671 (MOLEX or compatible) Mating Connecter: 51021-0600 (MOLEX or compatible) Pin No. Symbol Pin Description 1 VLED Power supply, +12V 2 VLED Power supply, +12V 3 GND Ground 4 GND Ground 5 ON/OFF 6 PWM "H (+3.3V)": ON, "L (GND or Open)": OFF 1-100% (200 Hz) ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP. 3/5 Version 0.3, Dec. 2008 ------------------------------------------------------------------------- G065VN01 V2 All information is subject to change without notice (Preliminary) Block diagram ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP. 4/5 Version 0.3, Dec. 2008 ------------------------------------------------------------------------- G065VN01 V2 All information is subject to change without notice (Preliminary) Reliability specification Items Temperature Humidity Bias High Temperature Operation Low Temperature Operation High Temperature Storage Low Temperature Storage Thermal Shock Test Hot Start Test Cold Start Test Shock Test (Non-Operating) Vibration Test (Non-Operating) Required Condition 40 85 -30 85 -30 -20 85 -30 Remark Note 2 Note 2 Note 2 Note 2 Note 2 Note 2 Note 2 Note 2 50G,20ms,Half-sine wave, (X, Y, Z) Note 2 1.5G, 10~200~10Hz, Sine wave, 30mins/axis, 3 direction (X, Y, Z) Note 2 /90%,300Hr ,300Hr ,300Hr ,300 hours ,300 hours /30 min ,60/30 min ,100cycles /1 Hr (min.), power on/off per 5 minutes, repeat 5 times /1 Hr (min.), power on/off per 5 minutes, repeat 5 times Contact Discharge: 8KV, 150pF(330) 1sec, 8 points, 25 times/point ESD Note 1,2 Air Discharge: 15KV, 150pF(330) 1sec, 8 points, 25 times/point Operating: 14,000 ft, Ramp: 2000 ft/min, 8hrs Attitude Test Note 2 Non-operating: 40,000 ft, Ramp: 2000 ft/min, 24hrs Note1: According to EN61000-4-2 ESD class B criteria, some performance degradation is allowed. TFT-LCD module is self-recoverable, no data lost and no hardware failures after test. Note2: Water condensation is not allowed for each test items. Each test is done by new TFT-LCD module. Don't use the same TFT-LCD module repeatedly for reliability test. The reliability test is performed only to examine the TFT-LCD module capability. To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance. ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP. 5/5 Version 0.3, Dec. 2008