PSA3180C PHASE LOCKED LOOP 9939 Via Pasar * San Diego, CA 92126 TEL (858) 621-2700 FAX (858) 621-2722 Rev A1 PHASE NOISE (1 Hz BW, typical) -60 -70 -80 -90 -100 FEATURES * Frequency Range: 3157 - 3190 MHz * Step Size: 125 KHz * PLL-24H - Style Package APPLICATIONS * Digital Radio Equipment * Fixed Wireless Access * Satellite Communication Systems -110 -120 -130 -140 -150 100.0E+0 1.0E+3 10.0E+3 VALUE 3157 - 3190 PERFORMANCE SPECIFICATIONS Frequency Range 100.0E+3 1.0E+6 UNITS MHz dBc/Hz Phase Noise @ 10 kHz offset (1 Hz BW, typ.) -108 Harmonic Suppression (2nd, typ.) dBc Sideband Spurs (typ.) -12 -70 Power Output 03 dBm Load Impedance 50 125 KHz 5000 3 mSec mSec Operating Temperature Range 3 -40 to 85 Package Style PLL-24H Step Size Charge Pump Output Current Switching Speed (typ., adjacent channel) Startup Lock Time (typ.) dBc C POWER SUPPLY REQUIREMENTS Supply Voltage (Vcc, nom.) Supply Current (Icc, typ.) 5 Vdc 35 mA All specifications are typical unless otherwise noted and subject to change without notice. APPLICATION NOTES * AN-107 * AN-200 * AN-201 : How to Solder Z-COMM VCOs / PLLs : Mounting and Grounding of Z-COMM PLLs : PLL Fundamentals AN-202 : PLL Functional Description NOTES: Reference Oscillator Signal: 5 MHz<f o s c <100 MHz Frequency Synthesizer: Analog Devices - ADF4106 (c) Z-Communications, Inc. Prescaler: 32 Page 1 All rights reserved LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP PSA3180C PAGE 2 VCO TUNING CURVE, typ. 3220 3210 FREQUENCY (MHz) 3200 3190 3180 3170 -40 3160 25 3150 85 3140 c c c 3130 3120 3110 0 0.5 1 1.5 2 2.5 3 3.5 4 TUNING VOLTAGE (Vdc) VCO POWER CURVE, typ. 5 OUTPUT POWER (dBm) 4 3 2 1 0 25 -1 c -2 -3 -4 -5 31 2 5 31 3 8 31 5 0 31 6 1 31 72 31 83 3 1 93 3 2 02 3 2 10 FREQUENCY (MHz) .032 .580 .605 1. SIDE VIEW 0.220 .455 .370 .285 .200 .115 -.026 .000 PHYSICAL DIMENSIONS -.025 24 23 22 21 20 2. .000 PIN 1 .153 .238 .323 .408 .493 1 19 2 18 3 .578 17 TOP 5 SEE DETAIL A .663 4. 5. 16 4 BOTTOM 3. 15 6 14 7 13 .816 .841 8 9 10 11 12 SEE DETAIL B .055 .015 .030 DETAIL B (TYP) DETAIL A (c) Z-Communications, Inc. TABS RANGE: SEE NOTE 5 (4 PLACES) (8 PLACES) Page 2 The inside radius of all 24 half holes at the perimeter of the board are plated to provide a surface for the attachment of the PLL Module to the PCB. 16 pads are for grounding, 8 pads are for signal interface. The surface of the shield is tin-plated and may be soldered to. The shield's base metal is cold-rolled steel. The ground plane on the bottom side is ground and attaches to a ground track on the top side of the board as well as to the shield. Unless otherwise noted all dimensions are in inches. Unless otherwise noted all tolerances are as follows: .xxx = .010. P1 P2-4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18-24 RF OUTPUT GROUND REFERENCE OSCILLATOR INPUT GROUND CLOCK DATA GROUND LOAD ENABLE GROUND LOCK DETECT VCC GROUND GROUND GROUND NO CONNECTION GROUND Printed in the U.S.A.