Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC1063LP3E v01.0214 mixers - i/q mixers, IRMs & Receivers - SMT GaAs MMIC I/Q MIXER 24 - 28 GHz Typical Applications Features The HMC1063LP3E is ideal for: Low LO Power: 10 dBm * Point-to-Point and Point-to-Multi-Point Radio Wide IF Bandwidth: DC - 3 GHz * Military Radar, EW & ELINT Image Rejection: 21 dBc * Satellite Communications LO / RF Isolation: 40 dB * Sensors High Input IP3: 17 dBm 16 Lead 3x3 mm SMT Package: 9 mm Functional Diagram General Description The HMC1063LP3E is a compact I/Q MMIC mixer in a leadless "Pb free" SMT package, which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The mixer utilizes two standard Hittite double balanced mixer cells and a 90 degree hybrid fabricated in a GaAs Schottky diode process. A low frequency quadrature hybrid was used to produce a 1000 MHz LSB IF output. This product is a much smaller alternative to hybrid style Image Reject Mixers and Single Sideband Upconverter assemblies. The HMC1063LP3E eliminates the need for wire bonding and allows the use of surface mount manufacturing techniques. Electrical Specifications [1][2], TA = +25C, IF = 1000 MHz, LSB, LO = +10 dBm Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range, RF 24 - 27 27- 28 GHz Frequency Range, LO 21 - 30 24 - 31 GHz DC - 3 GHz Frequency Range, IF DC - 3 Conversion Gain -11.5 -9.5 -11.5 -9.5 dB Image Rejection 15 21 13 21 dBc LO to RF Isolation 30 42 28 36 dB LO to IF Isolation 40 40 dB IP3 (Input) 18 16 dBm Amplitude Balance [2] 1 1 dB Phase Balance [2] -2 +2 Deg [1] Unless otherwise noted all measurements performed as downconverter. [2] Data taken without external 90 hybrid. 1 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz Data Taken as SSB Downconverter with External IF 90 Hybrid, IF = 1000 MHz Conversion Gain, LSB vs. Temperature Conversion Gain, LSB vs. LO Drive +25 C +85 C -40 C -5 -10 -15 -20 6 dBm 8 dBm 10 dBm 12 dBm -5 -10 -15 -20 24 25 26 27 28 24 25 RF FREQUENCY (GHz) Image Rejection, LSB vs. Temperature 27 50 IMAGE REJECTION (dBc) +25 C +85 C -40 C 40 30 20 10 0 6 dBm 8 dBm 10 dBm 12 dBm 40 30 20 10 0 24 25 26 27 28 24 25 RF FREQUENCY (GHz) 26 27 28 RF FREQUENCY (GHz) Input P1dB, LSB vs. Temperature Return Loss 15 0 RF -10 +25 C +85 C -40 C 12 LO P1dB (dBm) RETURN LOSS (dB) 28 Image Rejection, LSB vs. LO Drive 50 IMAGE REJECTION (dBc) 26 RF FREQUENCY (GHz) -20 -30 mixers - i/q mixers, IRMs & Receivers - SMT 0 CONVERSION GAIN (dB) CONVERSION GAIN (dB) 0 9 6 3 0 -40 24 25 26 27 RF FREQUENCY (GHz) 28 24 25 26 27 28 RF FREQUENCY (GHz) [1] Data taken without external IF 90 hybrid For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz Data Taken as SSB Downconverter with External IF 90 Hybrid, IF = 1000 MHz Input IP3, LSB vs. Temperature Input IP3, LSB vs. LO Drive 30 +25 C +85 C -40 C 25 20 IP3 (dBm) IP3 (dBm) 6 dBm 8 dBm 10 dBm 12 dBm 25 20 15 15 10 10 5 5 0 0 24 25 26 27 28 24 25 RF FREQUENCY (GHz) -10 -4 RESPONSE (dB) ISOLATION (dB) 0 RF/IF1 -30 27 28 IF Bandwidth* 0 -20 26 RF FREQUENCY (GHz) Isolations RF/IF2 LO/IF1 -40 RETURN LOSS CONVERSION GAIN -8 -12 -16 LO/IF2 LO/RF -20 0.5 -50 24 25 26 27 28 1 1.5 2 2.5 3 3.5 4 4.5 5 IF FREQUENCY (GHz) RF FREQUENCY (GHz) Amplitude Balance, LSB vs. LO Drive Phase Balance, LSB vs. LO Drive 3 10 8 dBm 10 dBm 12 dBm 2 PHASE BALANCE (deg) AMPLITUDE BALANCE (dB) mixers - i/q mixers, IRMs & Receivers - SMT 30 1 0 -1 5 8 dBm 10 dBm 12 dBm 0 -5 -10 24 25 26 27 RF FREQUENCY (GHz) 28 24 25 26 27 28 RF FREQUENCY (GHz) * Conversion gain data taken with external IF hybrid. 3 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz Data Taken as SSB Downconverter with External IF 90 Hybrid, IF = 1000 MHz Upconverter Performance, Sideband Rejection, LSB vs. LO Drive, 50 SIDEBAND REJECTION (dBc) CONVERSION GAIN (dB) 0 6 dBm 8 dBm 10 dBm 12 dBm -5 -10 -15 -20 6 dBm 8 dBm 10 dBm 12 dBm 40 30 20 10 0 24 25 26 27 28 24 25 RF FREQUENCY (GHz) Conversion Gain, USB vs. Temperature 28 0 +25 C +85 C -40 C -5 CONVERSION GAIN (dB) CONVERSION GAIN (dB) 27 Conversion Gain, USB vs. LO Drive 0 -10 -15 -20 6 dBm 8 dBm 10 dBm 12 dBm -5 -10 -15 -20 24 25 26 27 28 24 25 RF FREQUENCY (GHz) 26 27 28 RF FREQUENCY (GHz) Image Rejection, USB vs. Temperature Image Rejection, USB vs. LO Drive 50 50 +25 C +85 C -40 C 40 IMAGE REJECTION (dBc) IMAGE REJECTION (dBc) 26 RF FREQUENCY (GHz) 30 20 10 0 6 dBm 8 dBm 10 dBm 12 dBm 40 mixers - i/q mixers, IRMs & Receivers - SMT Upconverter Performance, Conversion Gain, LSB vs. LO Drive 30 20 10 0 24 25 26 RF FREQUENCY (GHz) 27 28 24 25 26 27 28 RF FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz Data Taken as SSB Downconverter with External IF 90 Hybrid, IF = 1000 MHz Input IP3, USB vs. Temperature Input P1dB, USB vs. Temperature 30 +25 C +85 C -40 C +25 C +85 C -40 C 25 20 IP3 (dBm) P1dB (dBm) 12 9 6 15 10 3 5 0 0 24 25 26 27 28 24 25 RF FREQUENCY (GHz) 26 27 28 RF FREQUENCY (GHz) Input IP3, USB vs. LO Drive Amplitude Balance, USB vs. LO Drive 3 30 AMPLITUDE BALANCE (dB) 6 dBm 8 dBm 10 dBm 12 dBm 25 20 IP3 (dBm) 15 10 5 8 dBm 10 dBm 12 dBm 2 1 0 -1 0 24 25 26 27 24 28 25 26 27 28 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Phase Balance, USB vs. LO Drive 10 PHASE BALANCE (deg) mixers - i/q mixers, IRMs & Receivers - SMT 15 5 8 dBm 10 dBm 12 dBm 0 -5 -10 24 25 26 27 28 RF FREQUENCY (GHz) 5 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz Data Taken as SSB Upconverter with External IF 90 Hybrid, IF = 1000 MHz Upconverter Performance, Sideband Rejection, USB vs. LO Drive, 50 SIDEBAND REJECTION (dBc) CONVERSION GAIN (dB) 0 6 dBm 8 dBm 10 dBm 12 dBm -5 -10 -15 6 dBm 8 dBm 10 dBm 12 dBm 40 30 20 10 0 -20 24 25 26 RF FREQUENCY (GHz) 27 28 24 25 26 27 28 RF FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com mixers - i/q mixers, IRMs & Receivers - SMT Upconverter Performance, Conversion Gain, USB vs. LO Drive 6 HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz Data Taken as SSB Downconverter with External IF 90 Hybrid, IF = 3000 MHz Conversion Gain, LSB vs. Temperature Conversion Gain, LSB vs. LO Drive +25 C +85 C -40 C -5 CONVERSION GAIN (dB) CONVERSION GAIN (dB) 0 -10 -15 -20 25 26 -10 -15 27 28 24 25 RF FREQUENCY (GHz) 27 28 Image Rejection, LSB vs. LO Drive 50 50 IMAGE REJECTION (dBc) +25 C +85 C -40 C 40 30 20 10 0 6 dBm 8 dBm 10 dBm 12 dBm 40 30 20 10 0 24 25 26 27 28 24 25 RF FREQUENCY (GHz) 26 27 28 27 28 RF FREQUENCY (GHz) Input IP3, LSB vs. Temperature Input IP3, LSB vs. LO Drive 30 30 +25 C +85 C -40 C 6 dBm 8 dBm 10 dBm 12 dBm 25 20 IP3 (dBm) 20 IP3 (dBm) 26 RF FREQUENCY (GHz) Image Rejection, LSB vs. Temperature 25 15 15 10 10 5 5 0 0 24 25 26 RF FREQUENCY (GHz) 7 6 dBm 8 dBm 10 dBm 12 dBm -5 -20 24 IMAGE REJECTION (dBc) mixers - i/q mixers, IRMs & Receivers - SMT 0 27 28 24 25 26 RF FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz Data Taken as SSB Downconverter with External IF 90 Hybrid, IF = 3000 MHz Upconverter Performance, Conversion Gain, LSB vs. LO Drive Upconverter Performance, Sideband Rejection, LSB vs. LO Drive, 6 dBm 8 dBm 10 dBm 12 dBm -5 -10 -15 -20 6 dBm 8 dBm 10 dBm 12 dBm 40 30 20 10 0 24 25 26 27 28 24 25 RF FREQUENCY (GHz) Conversion Gain, USB vs. Temperature 28 0 +25 C +85 C -40 C -5 CONVERSION GAIN (dB) CONVERSION GAIN (dB) 27 Conversion Gain, USB vs. LO Drive 0 -10 -15 -20 6 dBm 8 dBm 10 dBm 12 dBm -5 -10 -15 -20 24 25 26 27 28 24 25 RF FREQUENCY (GHz) 26 27 28 RF FREQUENCY (GHz) Image Rejection, USB vs. Temperature Image Rejection, USB vs. LO Drive 50 50 +25 C +85 C -40 C 40 IMAGE REJECTION (dBc) IMAGE REJECTION (dBc) 26 RF FREQUENCY (GHz) 30 20 10 6 dBm 8 dBm 10 dBm 12 dBm 40 mixers - i/q mixers, IRMs & Receivers - SMT 50 SIDEBAND REJECTION (dBc) CONVERSION GAIN (dB) 0 30 20 10 0 0 24 25 26 RF FREQUENCY (GHz) 27 28 24 25 26 27 28 RF FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz Data Taken as SSB Downconverter with External IF 90 Hybrid, IF = 3000 MHz Input IP3, USB vs. Temperature Input IP3, USB vs. LO Drive 9 30 +25 C +85 C -40 C 25 20 IP3 (dBm) IP3 (dBm) 6 dBm 8 dBm 10 dBm 12 dBm 25 20 15 15 10 10 5 5 0 0 24 25 26 27 28 24 25 RF FREQUENCY (GHz) 26 27 28 RF FREQUENCY (GHz) Upconverter Performance, Conversion Gain, USB vs. LO Drive Upconverter Performance, Sideband Rejection, USB vs. LO Drive, 50 SIDEBAND REJECTION (dBc) 0 CONVERSION GAIN (dB) mixers - i/q mixers, IRMs & Receivers - SMT 30 6 dBm 8 dBm 10 dBm 12 dBm -5 -10 -15 -20 40 30 20 6 dBm 8 dBm 10 dBm 12 dBm 10 0 24 25 26 RF FREQUENCY (GHz) 27 28 24 25 26 27 28 RF FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz Harmonics of LO nLO Spur at RF Port nLO 1 2 3 mRF 0 1 23 36.6 43.3 x 0 XX 1 28 x x 24 33.8 46.4 x 1 8 0 34 60 x 25 32.1 49.4 x 2 95 53 51 58 87 26 29.6 x x 3 x 97 97 97 97 27 31.8 x x 4 x x x 97 97 28 32.8 x x LO = + 10 dBm Values in dBc below LO level measured at RF Port. 2 3 4 RF = 22 GHz @ -10 dBm LO = 23 GHz @ +10 dBm Data taken without IF hybrid All values in dBc below IF power level For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com mixers - i/q mixers, IRMs & Receivers - SMT LO Freq. (GHz) MxN Spurious Outputs 10 HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz mixers - i/q mixers, IRMs & Receivers - SMT Absolute Maximum Ratings IF Input (At LO = 10 dBm and RF = -10 dBm) +11.5 dBm RF Input (At 10 dBm LO Power) +13 dBm LO Input (At -10 dBm RF Power) +14.5 dBm Channel Temperature 175 C Continuous Pdiss (T = 85C) (derate 6 mW/C above 85C) 550 mW Thermal Resistance (channel to ground paddle) 164 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1.. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILCON IMPREGNATED. 2.. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY. 3.. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN. 4.. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5.. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 6.. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.05mm MAX. 7.. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 8.. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating [2] Package Marking [1] HMC1063LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H1063 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 C 11 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz Pin Descriptions Function Description 1, 5, 6, 8, 9, 12, 13, 15, 16 N/C These pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 2, 4, 10 GND These pins and exposed ground paddle must be connected to RF/DC ground 3 LO This pin is DC coupled and matched to 50 Ohns 7 IF2 14 IF1 Differential IF input pins. For applications not requiring operation to DC, an off chip DC blocking capacitor should be used. For operation to DC this pin must not source/sink more than 3 mA of currrent or part non function and and possible part failure will result. 11 RFOUT Interface Schematic This pin is DC coupled and matched to 50 Ohms. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com mixers - i/q mixers, IRMs & Receivers - SMT Pin Number 12 HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz mixers - i/q mixers, IRMs & Receivers - SMT Evaluation PCB List of Materials for Evaluation PCB EVAL01-HMC1063LP3 [1] Item Description J1, J2 PCB mount K Connector SRI J3, J4 PCB mount SMA Connector Johnson U1 HMC1063LP3E Downconverter PCB [2] 600-00482-00-1 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR, FR4 or Rogers 4350 13 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC1063LP3E v01.0214 GaAs MMIC I/Q MIXER 24 - 28 GHz mixers - i/q mixers, IRMs & Receivers - SMT Notes: For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 14 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC1063LP3E EVAL01-HMC1063LP3 HMC1063LP3ETR