RF1172D * * * * Ideal Front-End Filter for European Wireless Receivers Low-Loss, Coupled-Resonator Quartz Design Simple External Impedance Matching Complies with Directive 2002/95/EC (RoHS)10 Pb 433.92 MHz SAW Filter The RF1172D is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide front-end selectivity in 433.92 MHz receivers. Receiver designs using this filter include superheterodynes with 10.7 MHz or 500 kHz IF, plus direct conversion and superregenerative receivers. Typical applications of these receivers are wireless remote-control and security devices operating in Europe under ETSI I-ETS 300 220-1. This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically greater than 40 dB, of the LO and image spurious responses in superheterodyne receivers with 10.7 MHz IF's. RFM's advanced SAW design and fabrication technology is utilized to achieve high performance and very low loss with simple external impedance matching. SM3838-8 Case 3.8 x 3.8 Electrical Characteristics Characteristic Sym Notes Minimum Typical fc 1, 2, 3 433.92 Insertion Loss (433.760 - 434.080) ILMIN 1, 3 1.6 3 dB Bandwidth BW3 1, 3 Center Frequency at 25C Absolute Frequency 500 600 10 - 414 MHz 50 55 414 - 424 MHz 45 50 424 - 431 MHz 30 34 431 - 432 MHz 18 22 12 17 434.92 - 442 MHz 16 19 442 - 550 MHz 40 45 550 - 1000 MHz 50 55 Rejection Attenuation: (relative to ILmin) 1, 3 432 - 433 MHz Freq. Temp. Coefficient FTC Frequency Aging Absolute Value during the First Year |fA| Impedance @ fc Input ZIN = RINllCIN ZIN Temperature Output ZOUT = ROUTllCOUT ZOUT 5 1 Lid Symbolization (Y=year WW=week S=shift) Standard Reel Quantity Reel Size 7 Inch Reel Size 13 Inch Maximum Units MHz 2.5 dB 800 kHz dB 0.032 ppm/C2 10 ppm/yr 1428 || 111.5 pF 961 || 111.8 pF 477 || YWWS 9 500 Pieces/Reel 3000 Pieces/Reel CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. 4. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 test system with VSWR 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fc. Note that insertion loss and bandwidth and passband shape are dependent on the impedance matching component values and quality. The frequency fc is defined as the midpoint between the 3dB frequencies. Where noted specifications apply over the entire specified operating temperature range of -40C to +105C. The turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fo. The nominal frequency at any case temperature, Tc, may be calculated from: f = fo [1 - FTC (To - Tc)2]. Frequency aging is the change in fc with time and is specified at +65C or less. Aging may exceed the specification for prolonged temperatures above +65C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years. 6. The design, manufacturing process, and specifications of this device are subject to change. 7. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending. 8. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 9. Tape and Reel Standard Per ANSI / EIA 481. 10. This product complies with Directive 2002/95/EC of the European Parlament and of the Council of 27 January 2003 on the restriction of the use of certain hazadous substances in electrical and electronic equipment. 5. www.RFM.com E-mail: info@rfm.com (c)2009 by RF Monolithics, Inc. Page 1 of 3 RF1172D - 3/10/09 Absolute Maximum Ratings Rating Value Units Input Power Level 10 dBm DC Voltage 12 VDC Storage Temperature -40 to +125 C Operable Temperature Range -40 to +125 C 260 C Soldering Temperature (10 seconds / 5 cycles max.) Electrical Connections Pin Connection 1 Input 2 Input Ground 3 Ground 4 Case Ground 5 Output 6 Output Ground 7 Ground 8 Case Ground A E C B 8 8 1 7 H 7 1 2 6 6 2 3 5 5 3 G 4 4 F D Matching Circuit to 50 Case Dimensions 39nH 6 18nH Output 5 Input 1 7 8 4 Dimension 6.8pF 2 A B C D E F G H 3 2.7pF Optional Min mm Nom Ma Min Inches Nom Max 3.6 3.6 1.00 0.95 0.90 0.50 2.39 1.40 3.8 3.8 1.20 1.10 1.0 0.6 2.54 1.75 4.0 4.0 1.40 1.25 1.10 0.70 2.69 2.05 0.14 0.14 0.04 0.033 0.035 0.020 0.090 0.055 0.15 0.15 0.05 0.043 0.04 0.024 0.100 0.069 0.16 0.16 0.055 0.05 0.043 0.028 0.110 0.080 Electrical Connections Pin Connection 1 Input Ground 2 Input 3 Ground 4 Case Ground 5 Output Ground 6 Output 7 Ground 8 Case Ground www.RFM.com E-mail: info@rfm.com (c)2009 by RF Monolithics, Inc. Matching Circuit to 50 18nH Output 2.7pF 7 6 C 5 1 8 4 39nH Input 2 3 C 6.8pF Page 2 of 3 RF1172D - 3/10/09 www.RFM.com E-mail: info@rfm.com (c)2009 by RF Monolithics, Inc. Page 3 of 3 RF1172D - 3/10/09