Boots B (with 90 bend) 202C611 to 663 Uniboot S As Supplied (a) H Dia. K Dia. J Dia. H Dia. T P After Unrestricted Recovery (b) B (with 90 bend) S Tan H Dia. K Dia. J Dia. H Dia. J Dia. T Applications Use to provide abrasion protection for connectors. 202C611 to 663 The flexibility of design allows a variety of cable outlet angles. When installed on a spin-coupling adapter, cold reentry to the Materials Available 202C611 to 663 JO Material* -50 -51 -71 W Typ. P connector is possible by compressing the molded part. When used with adhesive it provides environmental sealing. Material Description Viton(R) polymer blend Elastomer polymer blend Flexible polyolefin Precoating No. N/A /164 /42 or /86 Adhesive Part No.** S-1125 S-1124 S-1017 or S-1048 *For more information, please see the appropriate material page in this section. **For more information, please see section 5. Product Dimensions H Part No. 202C611 202C621 202C632 202C642 202C653 202C663 Min. a -50, -51 14.2 [.56] 22.4 [.88] 34.0 [1.34] 44.2 [1.74] 21.2 [53.8] 22.5 [57.2] a -71 17.5 [.69] 26.4 [1.04] 38.1 [1.50] 47.8 [1.88] 54.9 [2.16] 77.2 [3.04] Max. b 6.9 [.27] 11.7 [.46] 17.5 [.69] 22.4 [.88] 27.9 [1.10] 40.6 [1.60] J Min. a -50, -51 a -71 11.2 [.44] 14.2 [.56] 17.8 [.70] 26.4 [1.04] 26.9 [1.06] 38.1 [1.50] 36.6 [1.44] 47.8 [1.88] 45.7 [1.80] 54.9 [2.16] 57.2 [2.25] 54.6 [2.15] Max. b 4.8 [.19] 8.1 [.32] 12.7 [.50] 17.5 [.69] 22.4 [.88] 22.9 [.90] K Max. b P 10% b 21.1 [.83] 26.7 [1.05] 32.8 [1.29] 37.8 [1.49] 42.9 [1.69] 62.2 [2.45] 120.7 [4.75] 133.4 [5.25] 146.1 [5.75] 158.8 [6.25] 171.5 [6.75] 236.2 [9.30] JO 10% b 17.5 [.69] 19.0 [.78] 22.4 [.88] 25.4 [1.00] 28.4 [1.12] 35.1 [1.38] S .03[0.76] b 1.52 [.06] 1.52 [.06] 1.78 [.07] 1.78 [.07] 1.78 [.07] 2.03 [.08] T .03[0.76] b 1.27 [.05] 1.27 [.05] 1.27 [.05] 1.27 [.05] 2.03 [.08] 2.03 [.08] W Min. b 0.33 [.013] 0.46 [.018] 0.51 [.020] 0.61 [.024] 0.61 [.024] 0.66 [.026] B Nom. b 62.5 [2.46] 67.8 [2.67] 73.4 [2.89] 78.2 [3.08] 82.8 [3.26] 138.4 [5.45] Note: Coating is optional. As supplied dimensions appearing in table are for uncoated parts. When coating is added, entry diameters will be reduced by 1.5 [.06] max. VITON is a trademark of DuPont Performance Elastomers Available in: Americas Europe Asia Pacific n n n 4-54 Catalog 1654025 Revised 12-04 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Japan: 81-44-900-5102 Singapore: 65-4866-151 UK: 44-1793-528171