Wall Plug - Ins
Web: www.TriadMag netics.com
Phone 951-277-0757
Fax 951-277-2757
22520B Temescal Canyon Road
Corona, California
92883 Publish Date: July 20, 2010
WDU9-1000
Electrical Specifica tions (@25C)
1. Primary Rating: 120V 60Hz 15.5W
2. Primary Excitation Current: 75mA Max
3. Secondary Rating: 9VDC ± 5%, 1000mADC
4. Secondary No-Load Rating: 12.7VDC Ref.
5. Output Ripple Voltage: 900mV Max
6. Operating Temperature Range: -10 Deg C to +40 Deg C
7. Temperature Rise: 75 Deg C Max at rated load
50 Deg C Max on enclosure surface
Mechanical Parameters:
Case Type: Thermopla stic molded enclosure.
Output Cord: 24 AWG, 6 Ft. Long Min.
Agency File:
UL/CUL: File E245587, UL 1310
A. Dimensions:
B. Schematic:
Technical Note: 1. Inside (tip)-positive (+) , outside-negative (-)
U.S. DOE Compliance per Sec. 301 of EISA 2007: As of July 1, 2008, this
product is intended for use as follows:
1. Requires Federal Fo od and Drug Administration listin g and approval
as a medical device in accorda nce with section 513 of the Federal
Food, Drug, and Cosmetic Act (21 U.S.C. 360c)
2. Powers the charger of a detachable battery pack or charges the
battery of a product that is fully or primarily motor operated.
3. As a service part or a spare part for an end-use product manufactu red
before July 1, 2008, that constitutes the primary load of this power
supply.
RoHS Compliance: As of manufacturing date February 2005, all st andard
product s meet the requirement s of 2002/95/EC, known as the RoHS initiative.
* Upon printing, this document is considered “uncontrolled”. Please contact
Triad Magnetics’ website for the most current version.
H W D
80 60 48
*Units: In Millimeter
