AMPLIFIERS & GAIN BLOCK - SMT
1
HMC589AST89E
v02.0617
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 4 GHz
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
General Description
Features
Functional Diagram
The HMC589AST89E is an InGaP HBT Gain
Block MMIC SMT amplier covering DC to
4 GHz and packaged in an industry standard
SOT89E. The amplier can be used as a cascadable
50 Ohm RF or IF gain stage as well as a LO or PA
driver with up to +19 dBm P1dB output power for
cellular/3G, FWA, CATV, microwave radio and test
equipment applications. The HMC589AST89E
offers 20 dB gain and +33 dBm output IP3 at 1
GHz while requiring only 82 mA from a single
positive supply. The HMC589AST89E InGaP HBT
gain block offers excellent output power and gain
stability over temperature.
P1dB Output Power: +21 dBm
Gain: 21 dB
Output IP3: +33 dBm
Single Supply: +5V
Industry Standard SOT89E Package
Typical Applications
The HMC589AST89E is ideal for:
• Cellular / PCS / 3G
• Fixed Wireless & WLAN
• CATV, Cable Modem & DBS
• Microwave Radio & Test Equipment
• IF & RF Applications
Electrical Specications, Vs= 5V, Rbias= 1.8 Ohm, TA = +25° C
Note: Data taken with broadband bias tee on device output.
Parameter Min. Ty p . Max. Units
Gain
DC - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
19
16
14
13
21
19
17
16
dB
dB
dB
dB
Gain Variation Over Temperature DC - 5 GHz 0.008 dB/ °C
Input Return Loss DC - 1.0 GHz
1.0 - 4.0 GHz
17
10
dB
dB
Output Return Loss DC - 1.0 GHz
1.0 - 4.0 GHz
12
8
dB
dB
Reverse Isolation DC - 4 GHz 23 dB
Output Power for 1 dB Compression (P1dB)
0.5 - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
1 7. 5
16
16
14.5
19
19
19
18
dBm
dBm
dBm
dBm
Output Third Order Intercept (IP3)
(Pout= 0 dBm per tone, 1 MHz spacing)
0.5 - 1.0 GHz
1.0 - 2.0 GHz
2.0 - 3.0 GHz
3.0 - 4.0 GHz
33
32
31.5
29
dBm
dBm
dBm
dBm
Noise Figure DC - 2.0 GHz
2.0 - 4.0 GHz
4.0
4.5
dB
dB
Supply Current (Icq) 82 102 mA
HMC589A* PRODUCT PAGE QUICK LINKS
Last Content Update: 07/09/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
EVALUATION KITS
HMC589A Evaluation Board
DOCUMENTATION
Application Notes
AN-1363: Meeting Biasing Requirements of Externally
Biased RF/Microwave Amplifiers with Active Bias
Controllers
Data Sheet
HMC589AST89E: InGaP HBT Gain Block MMIC Amplifier,
DC - 4 GHz Data Sheet
TOOLS AND SIMULATIONS
HMC589A S-parameters
DESIGN RESOURCES
HMC589A Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all HMC589A EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
AMPLIFIERS & GAIN BLOCK - SMT
2
HMC589AST89E
v02.0617
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 4 GHz
Output Return Loss vs. Temperature
Broadband Gain & Return Loss Gain vs. Temperature
Reverse Isolation vs. Temperature
Input Return Loss vs. Temperature
Noise Figure vs. Temperature
-30
-25
-20
-15
-10
-5
0
5
10
15
20
25
012345678
S21 S11 S22
RESPONSE (dB)
FREQUENCY (GHz)
0
4
8
12
16
20
24
012345
+25 C +85 C -40 C
GAIN (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
012345
+25 C +85 C -40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
012345
+25 C +85 C -40 C
RETURN LOSS (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
012345
+25 C +85 C -40 C
FREQUENCY (GHz)
ISOLATION (dB)
0
2
4
6
8
10
012345
+25 C +85 C -40 C
NOISE FIGURE (dB)
FREQUENCY (GHz)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
AMPLIFIERS & GAIN BLOCK - SMT
3
HMC589AST89E
v02.0617
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 4 GHz
Gain, Power & OIP3 vs. Supply Voltage
@ 850 MHz, Rbias = 1.8 Ohms
P1dB vs. Temperature Psat vs. Temperature
Output IP3 vs. Temperature
Vcc vs. Icc Over Temperature for
Fixed Vs= 5V, Rbias= 1.8 Ohms
4
8
12
16
20
24
012345
+25 C +85 C -40 C
FREQUENCY (GHz)
P1dB (dBm)
4
8
12
16
20
24
012345
+25 C +85 C -40 C
FREQUENCY (GHz)
Psat (dBm)
20
24
28
32
36
40
012345
+25 C +85 C -40 C
IP3 (dBm)
FREQUENCY (GHz)
0
4
8
12
16
20
24
28
32
36
4.5 5 5.5
Gain
P1dB
Psat
IP3
GAIN (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
Vs (Vdc)
70
72
74
76
78
80
82
84
86
88
90
4.83 4.84 4.85 4.86 4.87 4.88
Icc (mA)
Vcc (Vdc)
+85 C
-40 C
+25 C
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
AMPLIFIERS & GAIN BLOCK - SMT
4
HMC589AST89E
v02.0617
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 4 GHz
Outline Drawing
Absolute Maximum Ratings
Collector Bias Voltage (Vcc) +5.5 Vdc
RF Input Power (RFIN)(Vcc = +5 Vdc) +10 dBm up to 1 GHz
+8 dBm from 1-4 GHz
Junction Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 7.84 mW/°C above 85 °C) 0.51 W
Thermal Resistance
(junction to ground paddle) 127.6 ° C/ W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 2
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC589AST89E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [1] H589A
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Package Information
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. PACKAGE BODY MATERIAL:
MOLDING COMPOUND MP-180S OR EQUIVALENT.
2. LEAD MATERIAL: Cu w/ Ag SPOT PLATING.
3. LEAD PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS]
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
AMPLIFIERS & GAIN BLOCK - SMT
5
HMC589AST89E
v02.0617
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 4 GHz
Application Circuit
Recommended Component Values for Key Application Frequencies
Component
Frequency (MHz)
50 900 1900 2200 2400 3500 4000
L1 270 nH 56 nH 24 nH 24 nH 15 nH 8.2 nH 8.2 nH
C1, C2 0.01 µF 100 pF 100 pF 100 pF 100 pF 100 pF 100 pF
Note:
1. External blocking capacitors are required on
RFIN and RFOUT.
2. Rbias provides DC bias stability over temperature.
Pin Descriptions
Pin Number Function Description Interface Schematic
1IN This pin is DC coupled.
An off chip DC blocking capacitor is required.
3OUT RF output and DC Bias (Vcc) for the output stage.
2, 4 GND These pins and package bottom
must be connected to RF/DC ground.
Recommended Bias Resistor Values
for Icc = 88 mA, Rbias = (Vs - Vcc) / Icc
Supply Voltage (Vs) 5V 6V 8V
Rbias Value 1.8 Ω 13 Ω 38 Ω
Rbias Power rating 1/8 W ¼ W ½ W
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
AMPLIFIERS & GAIN BLOCK - SMT
6
HMC589AST89E
v02.0617
InGaP HBT GAIN BLOCK
MMIC AMPLIFIER, DC - 4 GHz
Evaluation PCB [3]
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and package bottom should be
connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Analog Device upon request.
List of Materials for Evaluation PCB EV1HMC589AST89 [1]
Item Description
J1 - J2 PCB Mount SMA Connector
J3 - J4 DC Pin
C1, C2 Capacitor, 0402 Pkg.
C3 100 pF Capacitor, 0402 Pkg.
C4 1000 pF Capacitor, 0603 Pkg.
C5 2.2 µF Capacitor, Tantalum
R1 Resistor, 1206 Pkg.
L1 Inductor, 0603 Pkg.
U1 HMC589AST89 / HMC589AST89E
PCB [2] 108370 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
[3] Evaluation board tuned for 1.9 GHz, 1/8W operation