400-001 TAG Ring Backshell 40 (R) with Strain Relief Rotatable Coupling - Low Profile 400 F S 001 M 16 06 L 6 CONNECTOR DESIGNATORS Product Series A-F-H-L-S Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Connector Designator Strain Relief Style (F, G, L) ROTATABLE COUPLING Angle and Profile A = 90 B = 45 S = Straight Cable Entry (Table IV, V) Shell Size (Table I) Basic Part No. Finish (Table II) Length * A Thread (Table I) Length .060 (1.52) Minimum Order Length 1.5 Inch (See Note 4) Ground Spring * Length .060 (1.52) Minimum Order Length 1.0 Inch (See Note 4) C Typ. (Table I) Shown with Style G Nut Add "-445" to Specify Glenair's Non-Detent, ("NESTOR") Spring-Loaded, Self-Locking Coupling. See Page 41 for Details. STYLE 2 (STRAIGHT See Note 1) E G (Table III) .88 (22.4) Max (Table III) F (Table III) H (Table III) STYLE 2 (45 & 90 See Note 1) Shown with Style L Strain Relief STYLE F Light Duty (Table V) .416 (10.5) Approx. Cable Range (c) 2005 Glenair, Inc. L STYLE G Light Duty (Table IV) STYLE L Light Duty (Table V) .072 (1.8) Approx. Cable Entry K CAGE Code 06324 .850 (21.6) Approx. Cable Range L Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 40 - Page 4 400-001 TAG Ring Backshell 40 (R) with Strain Relief Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 Dash No. 02 03 04 05 06 07 08 09 10 E Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) TABLE IV: CABLE ENTRY K Cable Entry Max Max .545 (13.8) .250 (6.4) .670 (17.0) .375 (9.5) .795 (20.2) .500 (12.7) .920 (23.4) .625 (15.9) 1.045 (26.5) .750 (19.1) 1.170 (29.7) .875 (22.2) 1.295 (32.9) 1.000 (25.4) 1.420 (36.1) 1.125 (28.6) 1.670 (42.4) 1.250 (31.8) F Max 1.660 (42.2) 1.720 (43.7) 1.780 (45.2) 1.870 (47.5) 1.980 (50.3) 2.170 (55.1) 2.170 (55.1) 2.320 (58.9) 2.320 (58.9) 2.370 (60.2) 2.470 (62.7) 2.560 (65.0) Dash No. 02 03 04 05 06 07 08 09 10 G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 1.670 (42.4) 1.790 (45.5) 1.810 (46.0) 1.880 (47.8) 1.970 (50.0) 2.140 (54.4) 2.140 (54.4) 2.250 (57.2) 2.250 (57.2) 2.420 (61.5) 2.670 (67.8) 2.670 (67.8) TABLE V: CABLE ENTRY Cable L Max Min .125 (3.2) .968 (24.6) .250 (6.4) 1.046 (26.6) .250 (6.4) 1.156 (29.4) .375 (9.5) 1.218 (30.9) 1.343 (34.1) .500 (12.7) .625 (15.9) 1.468 (37.3) 1.593 (40.5) .625 (15.9) 1.718 (43.6) .750 (19.1) .875 (22.2) 1.843 (46.8) Range Max .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. (c) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 40 - Page 5