2 of 5
FEATURES - Pin Compatble with AT&T, BT&D, PCO
- 1300/1550 NM Wavelength - Low power consumption
- For Singlemode/Multimode Applications - Standard +5V or -5V Power Supply
- Data rate upto 250 Mb/S - 12 Pin Dip Package with FC,ST or Pigtail
- DC coupled - Standard ECL Interface
TRANSMITTER CHARACTERISTICS ( T= 25°C )
Parameter Symbol Minimum Typical Maximum Unit
Wavelength λ1270 1310 1340 nm
Spectral Width(@125Mb/s) ∆λ 2 10 nm
Output Power ( Average ) P0SEE CHART BELOW
Wavelength λ1510 1550 1580 nm
Spectral Width ∆λ 2 10 nm
Output Power ( Average ) P0SEE CHART BELOW
ON:OFF Ratio 20:1
Data Rate 0 250 Mb/s
Supply Voltage Vee -4.75 -5.0 -5.25 V
Supply Current Iee 40 60 mA
Power Dissipation P220 350 mW
Rise/Fall Times Tr,Tf 1.5 , 2.5 ns
Data Dependent Jitter 0.6 ns(p-p)
Random Jitter 0.7 ns(p-p)
Duty-Cycle Distortion 0.6 ns(p-p)
NOTE: Can also operate on DC +5V Power Supply
AVERAGE OUTPUT POWER ( T= 25°C, 50% DUTY CYCLE )
Part Number
1300 nm Singlemode Min Typ Max Unit Part Number
1300 nm Multimode Min Typ Max Unit
MRTLxx0001(Cat1) .01 .02 .04 mW MRTLXX005 0.5 0.7 1.0 mW
MRTLXX001 0.1 0.2 0.4 mW MRTLXX007 0.7 1.0 1.4 mW
MRTLXX003 0.3 0.4 0.6 mW MRTLXX010 1.0 1.2 2.0 mW
MRTLxx004 (Cat2) 0.4 0.6 1.0 mW MRTLXX015 1.5 1.7 3.0 mW
MRTLXX005 0.5 0.7 1.0 mW
MRTLXX010 1.0 1.2 2.0 mW
AVERAGE OUTPUT POWER ( T= 25°C, 50% DUTY CYCLE )
Part Number
1550 nm Singlemode Min Typ Max Unit Part Number
1550 nm Multimode Min Typ Max Unit
MRTLXX5001 0.1 0.2 0.4 mW MRTLXX5005 0.5 0.7 1.0 mW
MRTLxx5003 0.3 0.4 0.6 mW MRTLXX5007 0.7 1.0 1.4 mW
MRTLXX5005 0.5 0.7 1.0 mW MRTLXX5010 1.0 1.2 2.0 mW
MRTLXX5010 1.0 1.2 2.0 mW MRTLXX5015 1.5 1.7 3.0 mW
XX = SP- Singlemode Pigtail, MP- Multimode Pigtail, ST- Singlemode ST, MT- Multimode ST
FC- Singlemode FC, MC- Multimode FC.(e.g MRTLST001)
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL RATING UNIT
Supply Voltage Vee -5.25 VOLTS
Supply Current Iee 150 mA
Operating Temp 0 - 50 °C
Storage Temp -20 - 70 °C
3 of 5
Package Style “ST”/ “ MT”
Package Style “FC”/ “MC”
Package Style “SP”/ “MP”
4 of 5
Package Style “ST”/ “MT”- NF
Package Style “FC”/ “MC”- NF
Package Style “SP”/ “MP”- NF
5 of 5
CLASS 1 DEVICE. THIS PRODUCT CONFORMS TO APPLICABLE REQUIREMENTS OF 21
CFR 1040 AT THE DATE OF MANUFACTURE(CDRH). THIS PRODUCT ALSO MEETS THE
REQUIREMENTS OF EN 60950 AND EN 60825 (TUV). APPLICABLE TO DEVICES WITH
MAXIMUM OUTPUT POWER OF 1mW.
TX-1L.DOC 6/11/97
