LM3480IM3X-5.0/NOPB - NATIONAL SEMICONDUCTOR

COUT

0.1 µF

LM3480IM3-5.0

2 1 5 V, 100 mA OUT6.5 V IN

CIN

0.1 µF

Product

Folder

Sample &

Buy

Technical

Documents

Tools &

Software

Support &

Community

LM3480

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

LM3480 100-mA, SOT-23, Quasi Low-Dropout Linear Voltage Regulator

1 Features 3 Description

The LM3480 is an integrated linear voltage regulator.

1• Input Voltage Range: up to 30 V It features operation from an input as high as 30 V

• 3.3-V, 5-V, 12-V, and 15-V Versions Available and an ensured maximum dropout of 1.2 V at the full

• Packaged in the Tiny 3-Lead SOT-23 Package 100-mA load. Standard packaging for the LM3480 is

the 3-lead SOT-23 package.

• 30-V Maximum Input for Operation

• 1.2-V Ensured Maximum Dropout Over Full Load The 5-V, 12-V, and 15-V members of the LM3480

and Temperature Ranges series are intended as tiny alternatives to industry

standard LM78Lxx series and similar devices. The

• 100-mA Ensured Minimum Load Current 1.2-V quasi-low dropout of LM3480 series devices

• ±5% Ensured Output Voltage Tolerance Over Full makes them a nice fit in many applications where the

Load and Temperature Ranges 2-V to 2.5-V dropout of LM78Lxx series devices

•−40 to +125°C Junction Temperature Range for precludes their (LM78Lxx series devices) use.

Operation The LM3480 series also features a 3.3-V member.

The SOT-23 packaging and quasi-low dropout

2 Applications features of the LM3480 series converge in this device

to provide a very nice, very tiny, 3.3-V, 100-mA bias

• Tiny Alternative to LM78Lxx Series and Similar supply that regulates directly off the system 5-V ±5%

Devices power supply.

• Tiny 5-V ±5% to 3.3-V, 100-mA Converter

• Post Regulator for Switching DC/DC Converter Device Information(1)

• Bias Supply for Analog Circuits PART NUMBER PACKAGE BODY SIZE (NOM)

LM3480 SOT-23 (3) 2.92 mm × 1.30 mm

(1) For all available packages, see the orderable addendum at

the end of the data sheet.

space

Typical Application Circuit

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.

LM3480

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

www.ti.com

Table of Contents

7.3 Feature Description................................................. 10

1 Features.................................................................. 17.4 Device Functional Modes........................................ 10

2 Applications ........................................................... 18 Application and Implementation ........................ 11

3 Description............................................................. 18.1 Application Information............................................ 11

4 Revision History..................................................... 28.2 Typical Application ................................................. 11

5 Pin Configuration and Functions......................... 39 Power Supply Recommendations...................... 13

6 Specifications......................................................... 410 Layout................................................................... 13

6.1 Absolute Maximum Ratings ...................................... 410.1 Layout Guidelines ................................................. 13

6.2 ESD Ratings.............................................................. 410.2 Layout Example .................................................... 13

6.3 Recommended Operating Conditions....................... 411 Device and Documentation Support................. 14

6.4 Thermal Information.................................................. 411.1 Community Resources.......................................... 14

6.5 Electrical Characteristics: LM3480-3.3, LM3480-5... 511.2 Trademarks........................................................... 14

6.6 Electrical Characteristics: LM3480-12, LM3480-15.. 611.3 Electrostatic Discharge Caution............................ 14

6.7 Typical Characteristics.............................................. 711.4 Glossary................................................................ 14

7 Detailed Description............................................ 10 12 Mechanical, Packaging, and Orderable

7.1 Overview................................................................. 10 Information........................................................... 14

7.2 Functional Block Diagram....................................... 10

4 Revision History

NOTE: Page numbers for previous revisions may differ from page numbers in the current version.

Changes from Revision G (February 2015) to Revision H Page

• Replaced Functional Block Diagram .................................................................................................................................... 10

• Changed text of External Capacitors subsection ................................................................................................................ 11

• Changed text of Output Capacitor subsection ..................................................................................................................... 11

Changes from Revision F (December 2014) to Revision G Page

• Changed pin numbers indicated in Typical Application drawing; fix typos............................................................................. 1

• Deleted soldering specs - found in POA ................................................................................................................................ 4

• Changed Handling Ratings to ESD Ratings format ............................................................................................................... 4

Changes from Revision E (March 2013) to Revision F Page

• Added Pin Configuration and Functions section, Handling Rating table, Feature Description section, Device

Functional Modes,Application and Implementation section, Power Supply Recommendations section, Layout

section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information

section; add updated Thermal Information............................................................................................................................. 1

Changes from Revision D (March 2013) to Revision E Page

• Changed layout of National Data Sheet to TI format ............................................................................................................. 9

Product Folder Links: LM3480

LM3480

www.ti.com

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

5 Pin Configuration and Functions

DBZ Package

3-Pin SOT-23

Top View

Pin Functions

PIN I/O DESCRIPTION

NAME NO.

OUT 1 O Output voltage

IN 2 I Input voltage supply

GND 3 — Common ground

Product Folder Links: LM3480

LM3480

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

www.ti.com

6 Specifications

6.1 Absolute Maximum Ratings(1)(2)

MIN MAX UNIT

Input voltage (IN to GND) –0.3 35 V

Power dissipation(3) Internally

Limited

Junction temperature(3) –40 150 °C

Storage temperature, Tstg −65 150 °C

(1) Absolute Maximum Ratings are limits beyond which damage to the device may occur. Recommended Operating Conditions are

conditions under which operation of the device is ensured. Recommended operating ratings do not imply ensured performance limits.

For ensured performance limits and associated test conditions, see the Electrical Characteristics: LM3480-3.3, LM3480-5.

(2) If Military- or Aerospace-specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.

(3) The Absolute Maximum power dissipation depends on the ambient temperature and can be calculated using P = (TJ– TA) / RθJA where

TJis the junction temperature, TAis the ambient temperature, and RθJA is the junction-to-ambient thermal resistance. The 370-mW

rating results from substituting the Absolute Maximum junction temperature, 150°C for TJ, 50°C for TA, and 269.6°C/W for RθJA. More

power can be safely dissipated at lower ambient temperatures. Less power can be safely dissipated at higher ambient temperatures.

The Absolute Maximum power dissipation can be increased by 3.7 mW for each °C below 50°C ambient. It must be derated by 3.7 mW

for each °C above 50°C ambient. Heat sinking enables the safe dissipation of more power. The LM3480 actively limits its junction

temperature to about 150°C.

6.2 ESD Ratings VALUE UNIT

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±2000

Electrostatic

V(ESD) V

discharge Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±500

(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

6.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)(1)

MIN MAX UNIT

Maximum input voltage (IN to GND) 0 30 V

Junction temperature (TJ) –40 125 °C

(1) Absolute Maximum Ratings are limits beyond which damage to the device may occur. Recommended Operating Conditions are

conditions under which operation of the device is ensured. Recommended operating ratings do not imply ensured performance limits.

For ensured performance limits and associated test conditions, see the Electrical Characteristics: LM3480-3.3, LM3480-5.

6.4 Thermal Information LM3480

THERMAL METRIC(1) SOT-23 (DBZ) UNIT

3 PINS

RθJA Junction-to-ambient thermal resistance 269.6

RθJC(top) Junction-to-case (top) thermal resistance 141.1

RθJB Junction-to-board thermal resistance 63.1 °C/W

ψJT Junction-to-top characterization parameter 24.2

ψJB Junction-to-board characterization parameter 62.1

(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.

Product Folder Links: LM3480

LM3480

www.ti.com

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

6.5 Electrical Characteristics: LM3480-3.3, LM3480-5

Typical and other limits apply for TA= TJ= 25°C, unless otherwise specified. Nominal output voltage (VNOM) = 3.3 V or 5

V.(1)(2)(3)

VNOM = 3.3 V VNOM = 5 V

PARAMETER TEST CONDITIONS UNIT

MIN TYP MAX MIN TYP MAX

VIN = VNOM + 1.5 V 3.17 3.3 3.43 4.8 5 5.2

1 mA ≤IOUT ≤100 mA

VOUT Output voltage V

VIN = VNOM + 1.5 V

1 mA ≤IOUT ≤100 mA 3.14 3.46 4.75 5.25

−40°C ≤TJ≤125°C

VNOM + 1.5 V ≤VIN ≤30 V 10 12

IOUT = 1 mA

ΔVOUT Line regulation mV

VNOM + 1.5 V ≤VIN ≤30 V

IOUT = 1 mA 25 25

−40°C ≤TJ≤125°C

VIN = VNOM + 1.5 V 20 20

10 mA ≤IOUT ≤100 mA

ΔVOUT Load regulation mV

VIN = VNOM + 1.5 V

10 mA ≤IOUT ≤100 m 40 40

−40°C ≤TJ≤125°C

VNOM + 1.5 V ≤VIN ≤30 V 2 2

No Load

IGND Ground pin current mA

VNOM + 1.5 V ≤VIN ≤30 V

No Load, 4 4

−40°C ≤TJ≤125°C

IOUT = 10 mA 0.7 0.9 0.7 0.9 V

IOUT = 10 mA 1 1

−40°C ≤TJ≤125°C

VIN -Dropoutvoltage

VOUT IOUT = 100 mA 0.9 1.1 0.9 1.1 V

IOUT = 100 mA 1.2 1.2

−40°C ≤TJ≤125°C

VIN = 10 V

enOutput noise voltage 100 150 µVrms

Bandwidth: 10 Hz to 100 kHz

(1) A typical is the center of characterization data taken with TA= TJ= 25°C. Typicals are not ensured.

(2) All limits are ensured. All electrical characteristics having room-temperature limits are tested during production with TA= TJ= 25°C. All

hot and cold limits are ensured by correlating the electrical characteristics to process and temperature variations and applying statistical

process control.

(3) All voltages except dropout are with respect to the voltage at the GND pin.

Product Folder Links: LM3480

LM3480

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

www.ti.com

6.6 Electrical Characteristics: LM3480-12, LM3480-15

Typical and other limits apply for TA= TJ= 25°C, unless otherwise specified. Nominal output voltage (VNOM) = 12 V or 15

V.(1)(2)(3)

VNOM = 12 V VNOM = 15 V

PARAMETER TEST CONDITIONS UNIT

MIN TYP MAX MIN TYP MAX

VIN = VNOM + 1.5 V 11.52 12 12.48 14.4 15 15.6

1 mA ≤IOUT ≤100 mA

VOUT Output voltage V

VIN = VNOM + 1.5 V

1 mA ≤IOUT ≤100 mA 11.4 12.6 14.25 15.75

−40°C ≤TJ≤125°C

VNOM + 1.5 V ≤VIN ≤30 V 14 16

IOUT = 1 mA

ΔVOUT Line regulation mV

VNOM + 1.5 V ≤VIN ≤30 V

IOUT = 1 mA 40 40

−40°C ≤TJ≤125°C

VIN = VNOM + 1.5 V 36 45

10 mA ≤IOUT ≤100 mA

ΔVOUT Load regulation mV

VIN = VNOM + 1.5 V

10 mA ≤IOUT ≤100 mA 60 75

−40°C ≤TJ≤125°C

VNOM + 1.5 V ≤VIN ≤30 V 2 2

No Load

IGND Ground pin current mA

VNOM + 1.5 V ≤VIN ≤30 V 4 4

No Load, −40°C ≤TJ≤125°C

IOUT = 10 mA 0.7 0.9 0.7 0.9 V

IOUT = 10 mA, 1 1

−40°C ≤TJ≤125°C

VIN -Dropout voltage

VOUT IOUT = 100 mA 0.9 1.1 0.9 1.1 V

IOUT = 100 mA , 1.2 1.2

−40°C ≤TJ≤125°C

VIN = 10 V

enOutput noise voltage 360 450 µVrms

Bandwidth: 10 Hz to 100 kHz

(1) A typical is the center of characterization data taken with TA= TJ= 25°C. Typicals are not ensured.

(2) All limits are ensured. All electrical characteristics having room-temperature limits are tested during production with TA= TJ= 25°C. All

hot and cold limits are ensured by correlating the electrical characteristics to process and temperature variations and applying statistical

process control.

(3) All voltages except dropout are with respect to the voltage at the GND pin.

Product Folder Links: LM3480

LM3480

www.ti.com

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

6.7 Typical Characteristics

Unless indicated otherwise, VIN = VNOM + 1.5 V, CIN = 0.1 µF, COUT = 0.1 µF, and TA .= 25°C.

Figure 1. Dropout Voltage vs Load Current Figure 2. Dropout Voltage vs Junction Temperature

Figure 3. Ground Pin Current vs Input Voltage Figure 4. Ground Pin Current vs Input Voltage

Figure 5. Ground Pin Current vs Load Current Figure 6. Ground Pin Current vs Junction Temperature

Product Folder Links: LM3480

LM3480

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

www.ti.com

Typical Characteristics (continued)

Unless indicated otherwise, VIN = VNOM + 1.5 V, CIN = 0.1 µF, COUT = 0.1 µF, and TA .= 25°C.

Figure 7. Input Current vs Input Voltage Figure 8. Input Current vs Input Voltage

Figure 9. Output Voltage vs Input Voltage Figure 10. Output Voltage vs Input Voltage

Figure 11. Output Voltage vs Input Voltage Figure 12. Output Voltage vs Input Voltage

Product Folder Links: LM3480

LM3480

www.ti.com

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

Typical Characteristics (continued)

Unless indicated otherwise, VIN = VNOM + 1.5 V, CIN = 0.1 µF, COUT = 0.1 µF, and TA .= 25°C.

Figure 13. Output Short-Circuit Current Figure 14. Output Short-Circuit Current

Figure 15. Power Supply Rejection Ratio Figure 16. Power Supply Rejection Ratio

Figure 17. DC Load Regulation

Product Folder Links: LM3480

Current

Limit

IN OUT

GND

LM3480

PNP

Bandgap

Reference

Thermal

Shutdown NPN

LM3480

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

www.ti.com

7 Detailed Description

7.1 Overview

The LM3480 is an integrated linear voltage regulator with inputs that can be as high as 30 V. It ensures a

maximum dropout of 1.2 V at the full load of 100 mA. The LM3480 has different output options including 3.3-V, 5-

V, 12-V, and 15-V outputs, making LM3480 the tiny alternative to industry standard LM78Lxx series and similar

devices.

7.2 Functional Block Diagram

7.3 Feature Description

7.3.1 3.3-V, 5-V, 12-V, and 15-V Versions Available

The 3.3-V, 5-V, 12-V, and 15-V versions of LM3480 series are intended as tiny alternatives to industry standard

LM78Lxx series and similar devices.

7.3.2 1.2-V Ensured Maximum Dropout

The 1.2-V quasi-low dropout of the LM3480 series devices make them a nice fit in many application where the 2-

V to 2.5-V dropout of LM78Lxx series devices precludes their use.

7.4 Device Functional Modes

7.4.1 Operation with VIN =5V

The 3.3-V member of LM3480 can operate with an input of 5 V ±5%, its tiny SOT-23 package and quasi-low

dropout makes it suitable for providing a very tiny, 3.3-V, 100-mA bias supply from 5-V power supply.

Product Folder Links: LM3480

COUT

0.1 µF

LM3480IM3-5.0

2 1 5 V, 100 mA OUT6.5 V IN

CIN

0.1 µF

LM3480

www.ti.com

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

8 Application and Implementation

NOTE

Information in the following applications sections is not part of the TI component

specification, and TI does not warrant its accuracy or completeness. TI’s customers are

responsible for determining suitability of components for their purposes. Customers should

validate and test their design implementation to confirm system functionality.

8.1 Application Information

The LM3480 is a linear voltage regulator with 1.2-V ensured maximum dropout and 100-mA ensured minimum

load current. This device has 3.3-V, 5-V, 12-V, and 15-V versions. The implementation of LM3480 is discussed in

this section.

8.2 Typical Application

8.2.1 Design Requirements

DESIGN PARAMETER EXAMPLE VALUE

Input voltage 6.5 V

Output voltage 5 V

Output current 100 mA

8.2.2 Detailed Design Procedure

8.2.2.1 External Capacitors

A minimum input and output capacitance value of 0.1 µF is required for stability and adequate transient

performance. There is no specific ESR limitation, although excessively high ESR will compromise transient

performance. There is no specific limitation on a maximum capacitance value on the input or the output.

8.2.2.1.1 Output Capacitor

The minimum output capacitance required to maintain stability is 0.1 µF. Larger values of output capacitance can

be used to improve transient behavior.

8.2.3 Application Curves

Unless indicated otherwise, VIN = 6.5 V, VOUT =5V,COUT = 0.1 µF, and TA= 25°C

Product Folder Links: LM3480

LM3480

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

www.ti.com

Figure 18. Line Transient Response Figure 19. Line Transient Response

Figure 20. Load Transient Response Figure 21. Load Transient Response

Figure 22. Load Transient Response Figure 23. Load Transient Response

Product Folder Links: LM3480

VOUT

VIN

GND

OUT

2 1

LM3480

www.ti.com

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

9 Power Supply Recommendations

The LM3480 is designed to operated from up to a 30-V input voltage supply. This input supply must be well

regulated. If the input supply is noisy, additional input capacitors with low ESR can help to improve the output

noise performance.

10 Layout

10.1 Layout Guidelines

For best overall performance, place all the circuit components on the same side of the circuit board and as near

as practical to the respective LDO pin connections. Place ground return connections to the input and output

capacitors, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side,

copper surface. The use of vias and long traces to create LDO circuit connections is strongly discouraged and

negatively affects system performance. This grounding and layout scheme minimizes the inductive parasitic, and

thereby reduces load-current transients, minimizes noise, and increases circuit stability.

A ground reference plane is also recommended and is either embedded in the PCB itself or located on the

bottom side of the PCB opposite the components. This reference plane serves to assure accuracy of the output

voltage, shield noise, and behaves similar to a thermal plane to spread heat from the LDO device. In most

applications, this ground plane is necessary to meet thermal requirements.

10.2 Layout Example

Product Folder Links: LM3480

LM3480

SNVS011H –JUNE 1999–REVISED SEPTEMBER 2015

www.ti.com

11 Device and Documentation Support

11.1 Community Resources

The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective

contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of

Use.

TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration

among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help

solve problems with fellow engineers.

Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and

contact information for technical support.

11.2 Trademarks

E2E is a trademark of Texas Instruments.

All other trademarks are the property of their respective owners.

11.3 Electrostatic Discharge Caution

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

11.4 Glossary

SLYZ022 —TI Glossary.

This glossary lists and explains terms, acronyms, and definitions.

12 Mechanical, Packaging, and Orderable Information

The following pages include mechanical, packaging, and orderable information. This information is the most

current data available for the designated devices. This data is subject to change without notice and revision of

this document. For browser-based versions of this data sheet, refer to the left-hand navigation.

Product Folder Links: LM3480

PACKAGE OPTION ADDENDUM

www.ti.com 11-Jan-2021

Addendum-Page 1

PACKAGING INFORMATION

Orderable Device Status

(1)

Package Type Package

Drawing Pins Package

Qty Eco Plan

(2)

Lead finish/

Ball material

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

Samples

LM3480IM3-12 NRND SOT-23 DBZ 3 1000 Non-RoHS

& Green Call TI Call TI -40 to 125 L0C

LM3480IM3-12/NOPB ACTIVE SOT-23 DBZ 3 1000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 L0C

LM3480IM3-15/NOPB ACTIVE SOT-23 DBZ 3 1000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 L0D

LM3480IM3-3.3 NRND SOT-23 DBZ 3 1000 Non-RoHS

& Green Call TI Call TI -40 to 125 L0A

LM3480IM3-3.3/NOPB ACTIVE SOT-23 DBZ 3 1000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 L0A

LM3480IM3-5.0 NRND SOT-23 DBZ 3 1000 Non-RoHS

& Green Call TI Call TI -40 to 125 L0B

LM3480IM3-5.0/NOPB ACTIVE SOT-23 DBZ 3 1000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 L0B

LM3480IM3X-12/NOPB ACTIVE SOT-23 DBZ 3 3000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 L0C

LM3480IM3X-15/NOPB ACTIVE SOT-23 DBZ 3 3000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 L0D

LM3480IM3X-3.3 NRND SOT-23 DBZ 3 3000 Non-RoHS

& Green Call TI Call TI -40 to 125 L0A

LM3480IM3X-3.3/NOPB ACTIVE SOT-23 DBZ 3 3000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 L0A

LM3480IM3X-5.0/NOPB ACTIVE SOT-23 DBZ 3 3000 RoHS & Green SN Level-1-260C-UNLIM -40 to 125 L0B

(1) The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance

do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may

reference these types of products as "Pb-Free".

RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.

Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based

flame retardants must also meet the <=1000ppm threshold requirement.

PACKAGE OPTION ADDENDUM

www.ti.com 11-Jan-2021

Addendum-Page 2

(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation

of the previous line and the two combined represent the entire Device Marking for that device.

(6) Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two

lines if the finish value exceeds the maximum column width.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information

provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and

continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.

TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

LM3480IM3-12 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3

LM3480IM3-12/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3

LM3480IM3-15/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3

LM3480IM3-3.3 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3

LM3480IM3-3.3/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3

LM3480IM3-5.0 SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3

LM3480IM3-5.0/NOPB SOT-23 DBZ 3 1000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3

LM3480IM3X-12/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3

LM3480IM3X-15/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3

LM3480IM3X-3.3 SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3

LM3480IM3X-3.3/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3

LM3480IM3X-5.0/NOPB SOT-23 DBZ 3 3000 178.0 8.4 3.3 2.9 1.22 4.0 8.0 Q3

PACKAGE MATERIALS INFORMATION

www.ti.com 29-Sep-2019

Pack Materials-Page 1

*All dimensions are nominal

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

LM3480IM3-12 SOT-23 DBZ 3 1000 210.0 185.0 35.0

LM3480IM3-12/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0

LM3480IM3-15/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0

LM3480IM3-3.3 SOT-23 DBZ 3 1000 210.0 185.0 35.0

LM3480IM3-3.3/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0

LM3480IM3-5.0 SOT-23 DBZ 3 1000 210.0 185.0 35.0

LM3480IM3-5.0/NOPB SOT-23 DBZ 3 1000 210.0 185.0 35.0

LM3480IM3X-12/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0

LM3480IM3X-15/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0

LM3480IM3X-3.3 SOT-23 DBZ 3 3000 210.0 185.0 35.0

LM3480IM3X-3.3/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0

LM3480IM3X-5.0/NOPB SOT-23 DBZ 3 3000 210.0 185.0 35.0

PACKAGE MATERIALS INFORMATION

www.ti.com 29-Sep-2019

Pack Materials-Page 2

4203227/C

www.ti.com

PACKAGE OUTLINE

TYP

0.20

0.08

0.25

2.64

2.10 1.12 MAX

TYP

0.10

0.01

3X 0.5

0.3

TYP

0.6

0.2

1.9

0.95

TYP-80

3.04

2.80

1.4

1.2

(0.95)

SOT-23 - 1.12 mm max heightDBZ0003A

SMALL OUTLINE TRANSISTOR

4214838/C 04/2017

NOTES:

1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing

per ASME Y14.5M.

2. This drawing is subject to change without notice.

3. Reference JEDEC registration TO-236, except minimum foot length.

0.2 C A B

INDEX AREA

PIN 1

GAGE PLANE

SEATING PLANE

0.1 C

SCALE 4.000

www.ti.com

EXAMPLE BOARD LAYOUT

0.07 MAX

ALL AROUND 0.07 MIN

ALL AROUND

3X (1.3)

3X (0.6)

(2.1)

2X (0.95)

(R0.05) TYP

4214838/C 04/2017

SOT-23 - 1.12 mm max heightDBZ0003A

SMALL OUTLINE TRANSISTOR

NOTES: (continued)

4. Publication IPC-7351 may have alternate designs.

5. Solder mask tolerances between and around signal pads can vary based on board fabrication site.

SYMM

LAND PATTERN EXAMPLE

SCALE:15X

PKG

SOLDER MASK

OPENING

METAL UNDER

SOLDER MASK

DEFINED

METAL

SOLDER MASK

OPENING

NON SOLDER MASK

DEFINED

(PREFERRED)

SOLDER MASK DETAILS

www.ti.com

EXAMPLE STENCIL DESIGN

(2.1)

2X(0.95)

3X (1.3)

3X (0.6)

(R0.05) TYP

SOT-23 - 1.12 mm max heightDBZ0003A

SMALL OUTLINE TRANSISTOR

4214838/C 04/2017

NOTES: (continued)

6. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate

design recommendations.

7. Board assembly site may have different recommendations for stencil design.

SOLDER PASTE EXAMPLE

BASED ON 0.125 THICK STENCIL

SCALE:15X

SYMM

PKG

IMPORTANT NOTICE AND DISCLAIMER

TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE

DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”

AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY

IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD

PARTY INTELLECTUAL PROPERTY RIGHTS.

These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate

TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable

standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you

permission to use these resources only for development of an application that uses the TI products described in the resource. Other

reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party

intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages,

costs, losses, and liabilities arising out of your use of these resources.

TI’s products are provided subject to TI’s Terms of Sale (https:www.ti.com/legal/termsofsale.html) or other applicable terms available either

on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s

applicable warranties or warranty disclaimers for TI products.IMPORTANT NOTICE

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265