Position Sensors/EVWAE/D 10 mm GS Sensors Type: EVWAE/EVWAD detecting the angles of rotating axes. Features Low profile (H=2.2 mm), Shaft hole diameters of up to 4 mm are available. Long operation life: 1 million operation cycles. A wide electrical output angle of a maximum 343 , ready for SMDs Recommended Applications Detection of robot joint angles Detection of air conditioner damper angles Detection of various control unit angles Explanation of Part Numbers 1 2 3 4 Product Code 5 6 7 8 9 10 Specification 11 12 Taper & Resistance Shaft Type 7th, 8th, 9th 001 D hole Type 002 H hole Type Speci cations Rating 0.05 W, 5V Mechanical Operating Force 3 mN*m max. Total Resistance 5 k30 %, 10 k30 % Electrical Linearity 2 % ma x. 1,000,000 cycles min. (operation Angle 30) Operating Life Endurance Minimum Quantity/ Packing Unit 1,500 pcs. Embossed Taping (Reel Pack) Quantity/Carton 6,000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2017.04 industrial.panasonic.com/ac/e/ -1- Panasonic Corporation 2017 ANCTB58E 201704-Fd Position Sensors/EVWAE/D Dimensions in mm (not to scale) No. 1 EVWA General dimension tolerance : 0.3 ( )dimensions are reference dimensions. With sleeve Type Mounting surface 0.8 0.2 2.6 5.3 6.7 7.35 8.7 0 5 -0.1 .1 O C Sleeve #2' . ax 5 m .2 3-1 2.5 2.5 0.1 O C 0.2 Marking #1 #2 #3 1.2 8.4 2.2 10.6 0 2-1-0.1 9.4 Shaft Type D Type 2.8 H Type .1 +0 0 .1 +0 0 +0.1 0 4 3 3 +0.1 0 4 2.970.05 5 2-R0.1 : 0.5 Length No. 2 EVWA Shaft Type 7th, 8th, 9th D Type 001 H Type 002 General dimension tolerance : 0.3 ( )dimensions are reference dimensions. Without sleeve Type Mounting surface 5.3 6.7 7.35 #2' 0.2 8.7 2.6 0.1 3-1 2.5 2.5 0.2 Marking #1 #2 #3 1.2 8.4 2.2 10.6 0 2-1-0.1 Shaft Type D Type .1 +0 0 .1 +0 0 4 5 2-R0.1 : 0.5 Length 2.970.05 3 3 +0.1 0 4 +0.1 0 2.8 8.0 H Type Shaft Type 7th, 8th, 9th D Type 001 H Type 002 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ -2- Panasonic Corporation 2017 ANCTB58E 201704-Fd Position Sensors/EVWAE/D Circuit diagram Test circuit diagram #2' #3 Voltage drive method (Potentiometer Connection) #3 #2 Input impedance min. Vcc #2 #1 #1 PWB mounting hole for reference Without sleeve Type #1 #2 #3 3-1.4 3-1.4 2.5 1 5.2 3 1. 7.0 +0.05 0 1.1 7.0 3 7.2 #1 #2 #3 1. 1 7.2 6) ( 9.0 5.2 1.1 3 3 1. #2' 1. +0.05 0 #2' 9.0 +0 0 .05 +0 0 .05 With sleeve Type 2.5 2.5 2.5 80.05 9.40.05 (Pitch tolerance : 0.1) (Pitch tolerance : 0.1) View from mounting side View from mounting side Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Panasonic Corporation Electromechanical Control Business Division industrial.panasonic.com/ac/e/ -3- Panasonic Corporation 2017 ANCTB58E 201704-Fd