1
Accessories Cord retaining kits
https://www.schurter.com /PGZ01
Connectors
Cord retaining strain relief
4700.00XX
Approvals and Compliances
Description
- Front Panel :
Screw-on from front side
- 1 Function :
Protection against accidental disconnection of the plug
Weblinks
pdf datasheet, html-datasheet, General Product Information, Distributor-
Stock-Check, Accessories, Detailed request for product
For protection against loosening or accidental disconnection of the plug connector. Can also be mounted later. The correct kit type respectively the
corresponding Order No. for each combination of fixed and free components is shown in the selection chart.
Horizontal flanged components are secured to the panel using the kit supplied. Vertical flanged or snap-in components require additional drilling for
the cord retaining kit as shown in the diagrams below.
The kits with the part number 4700.00XX consist of:
1 Stainless steel retaining clip
2 Nickel plated brass pillars
2 Nickel plated brass nuts
2 Nickel plated beryllium copper crinkle washers
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic
safety and essential performance
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
RoHS SCHURTER AG EU Directive RoHS 2011/65/EU
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1