WIRE MANAGEMENT PRODUCTS
MULTI-PURPOSE PVC TUBING
PVC-105
148
C
HARACTERISTICS
OPERATING TEMPERATURE:
■
–20°C to 105°C
COLOR DESCRIPTION:
■
Size 24 to 1-1/2 Inches:
Black, Clear
■
Size 2 Inches to 2-1/2 Inches:
Black
PHYSICAL PROPERTIES:
■
Tensile Strength: 1800 psi,
(127 kg/cm2)
■
Ultimate Elongation: 300%
■
Specific Gravity: Clear 1.25,
Black 1.35
■
Flammability:Self-Extinguishing
(UL VW-1)
CHEMICAL PROPERTIES:
■
Corrosive Effect: Non-Corrosive
■
Fungus Resistance: No Growth
■
W ater Absorption: 0.5%
ELECTRICAL PROPERTIES:
■
Dielectric Strength: 800V/mil
(315 kV/cm)
■
Volume Resistivity: 1011 ohm-cm
C
HOOSE
PVC T
UBING
F
OR
:
■
Flexible Wire Protection
■
Resistance to Heat, Oil, and
Abrasion
PVC T
UBING
A
PPLICATIONS
:
■
Wire Harnesses
■
Ground Strap Protection
In accordance with NEMA standards, may
contain more than one length. PVC-105-24 to
PVC-105-1 are available air spooled.
S
PECIFICATIONS
■
UL Standard 224
■
CSA Standard 198
■
MIL-I-631D
®
UL STANDARD 224,
CSA STANDARD 198, MIL-I-631D
PVC-105-24 0.022 0,55 0.012 0,30 1000
PVC-105-22 0.027 0,68 0.012 0,30 100, 1000
PVC-105-20 0.034 0,86 0.016 0,41 1000
PVC-105-19 0.038 0,96 0.016 0,41 1000
PVC-105-18 0.042 1,07 0.016 0,41 100, 1000
PVC-105-17 0.047 1,19 0.016 0,41 100, 1000
PVC-105-16 0.053 1,35 0.016 0,41 100, 1000
PVC-105-15 0.059 1,50 0.016 0,41 100, 1000
PVC-105-14 0.066 1,68 0.016 0,41 100, 500
PVC-105-13 0.076 1,93 0.016 0,41 100, 500
PVC-105-12 0.085 2,16 0.016 0,41 500
PVC-105-11 0.095 2,41 0.016 0,41 100, 500
PVC-105-10 0.106 2,69 0.016 0,41 500
PVC-105-9 0.118 3,00 0.020 0,50 500
PVC-105-8 0.133 3,38 0.020 0,50 100, 500
PVC-105-7 0.148 3,76 0.020 0,50 100, 500
PVC-105-6 0.166 4,22 0.020 0,50 100, 500
PVC-105-5 0.186 4,72 0.020 0,50 100, 500
PVC-105-4 0.208 5,28 0.020 0,50 100, 250
PVC-105-3 0.234 5,94 0.020 0,50 100, 250
PVC-105-2 0.263 6,68 0.020 0,50 250
PVC-105-1 0.294 7,47 0.020 0,50 100, 250
PVC-105-0 0.330 8,38 0.020 0,50 100, 250
PVC-105-5/16 0.312 7,92 0.025 0,63 100, 250
PVC-105-3/8 0.375 9,52 0.025 0,63 100, 250
PVC-105-7/16 0.438 11,12 0.025 0,63 100
PVC-105-1/2A 0.500 12,70 0.025 0,63 100
PVC-105-9/16 0.562 14,27 0.030 0,76 100
PVC-105-5/8 0.625 15,87 0.030 0,76 100
PVC-105-3/4 0.750 19,05 0.035 0,88 50
PVC-105-7/8 0.875 22,22 0.035 0,88 50
PVC-105-1
IN 1.000 25,40 0.035 0,88 50
PVC-105-1-1/8 1.125 28,57 0.035 0,88 50
PVC-105-1-1/4 1.250 31,75 0.040 1,02 50
PVC-105-1-1/2 1.500 38,10 0.045 1,14 50
PVC-105-2
IN 2.000 50,80 0.060 1,52 50
PVC-105-2-1/2 2.500 63,50 0.070 1,78 50
Alpha
Part No. Nominal Nominal Standard
and Size Inside Diameter Wall Thickness Put-Up
(AWG or Inches) Inches mm Inches mm Spools (Ft.)
Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923 Web Site: www.alphawire.com
Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433 Email: info@alphawire.com
WIRE MANAGEMENT PRODUCTS
TEFLON®TUBING
TFT-200, 250
149
C
HARACTERISTICS
OPERATING TEMPERATURE:
■
–65°C to 260°C
COLOR DESCRIPTION:
■
All Standard Packages:Transparent
PHYSICAL PROPERTIES:
■
Tensile Strength: 2500 psi
(176 kg/cm2)
■
Ultimate Elongation: 200%
■
Specific Gravity: 2.2
■
Flammability:Self-Extinguishing
CHEMICAL PROPERTIES:
■
Corrosive Effect: Non-Corrosive
■
Fungus Resistance: No Growth
■
Water Absorption: 0.01%
ELECTRICAL PROPERTIES:
■
Dielectric Strength: 800V/mil
(315 kV/cm)
■
Volume Resistivity: 1018 ohm-cm
C
HOOSE
T
EFLON
®
T
UBING
F
OR
:
■
Excellent Heat and Chemical
■
Resistance
■
Superior Dielectric Strength
T
EFLON
®
T
UBING
A
PPLICATIONS
:
■
Wire Harnesses
■
High Temperature Component
Covering
S
PECIFICATIONS
■
ASTM D 3295
ASTM D 3295
TTFFTT--220000--3300——0.012 0,30 0.009 0,22 — — 100, 500, 1000
TTFFTT--220000--2288——0.015 0,38 0.009 0,22 — — 100, 500, 1000
TTFFTT--220000--2266——0.018 0,45 0.009 0,22 — — 100, 500, 1000
TTFFTT--220000--2244TTFFTT--225500--22440.022 0,55 0.010 0,25 0.012 0,30 100, 500, 1000
TTFFTT--220000--2222TTFFTT--225500--22220.028 0,71 0.010 0,25 0.012 0,30 100, 500, 1000
TTFFTT--220000--2200TTFFTT--225500--22000.034 0,86 0.012 0,30 0.016 0,41 100, 500, 1000
TTFFTT--220000--1199▲TTFFTT--225500--11990.038 0,96 0.012 0,30 0.016 0,41 100, 500, 1000
TTFFTT--220000--1188TTFFTT--225500--11880.042 1,07 0.012 0,30 0.016 0,41 100, 500, 1000
TTFFTT--220000--1177▲TTFFTT--225500--1177▲0.047 1,19 0.012 0,30 0.016 0,41 100, 500, 1000
TTFFTT--220000--1166TTFFTT--225500--11660.053 1,35 0.012 0,30 0.016 0,41 100, 500, 1000
TTFFTT--220000--1155▲TTFFTT--225500--1155▲▲ 0.059 1,50 0.012 0,30 0.016 0,41 100, 500, 1000
TTFFTT--220000--1144TTFFTT--225500--11440.066 1,68 0.012 0,30 0.016 0,41 100, 500
TTFFTT--220000--1133TTFFTT--225500--1133▲0.076 1,93 0.012 0,30 0.016 0,41 100, 500
TTFFTT--220000--1122TTFFTT--225500--1122▲0.085 2,16 0.012 0,30 0.016 0,41 100, 500
TTFFTT--220000--1111TTFFTT--225500--11110.095 2,41 0.012 0,30 0.016 0,41 100, 500
TTFFTT--220000--1100TTFFTT--225500--11000.106 2,69 0.012 0,30 0.016 0,41 100, 500
TTFFTT--220000--99TTFFTT--225500--990.118 3,00 0.015 0,38 0.020 0,50 100, 500
TTFFTT--220000--88TTFFTT--225500--880.133 3,38 0.015 0,38 0.020 0,50 100
TTFFTT--220000--77TTFFTT--225500--770.148 3,76 0.015 0,38 0.020 0,50 100
TTFFTT--220000--66TTFFTT--225500--660.166 4,22 0.015 0,38 0.020 0,50 100
TTFFTT--220000--55TTFFTT--225500--550.186 4,73 0.015 0,38 0.020 0,50 100
TTFFTT--220000--44TTFFTT--225500--440.208 5,28 0.015 0,38 0.020 0,50 100
TTFFTT--220000--33TTFFTT--225500--330.234 5,94 0.015 0,38 0.020 0,50 100
TTFFTT--220000--22TTFFTT--225500--220.263 6,68 0.015 0,38 0.020 0,50 100
TTFFTT--220000--11TTFFTT--225500--110.294 7,47 0.015 0,38 0.020 0,50 100
TTFFTT--220000--00TTFFTT--225500--000.330 8,38 0.015 0,38 0.020 0,50 100
▲▲
Not available in 500 ft. put-up
▲▲
Not available in 1000 ft. put-up
Teflon is a registered trademark of E.I. DuPont Co.
Nominal TFT-200 TFT-250
Alpha Part No. Inside Nominal Nominal Standard
and Size (AWG) Diameter Wall Thick. Wall Thick. Put-Up
Thin Wall Standard Wall Inches mm Inches mm Inches mm Spools (Ft.)
Web Site: www.alphawire.com Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923
Email: info@alphawire.com Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433
WIRE MANAGEMENT PRODUCTS
PVC COATED FIBERGLASS SLEEVING
PIF-130
150
C
HARACTERISTICS
OPERATING TEMPERATURE:
■
–20°C to 130°C
■
(NEMA: 130°C, UL: 105°C)
COLOR DESCRIPTION:
■
All Standard Packages: Black
PHYSICAL PROPERTIES:
■
Low Temperature Brittleness: –40°C
■
Flammability: Self-Extinguishing
(UL VW-1)
CHEMICAL PROPERTIES:
■
Corrosive Effect: Non-Corrosive
■
Fungus Resistance: No Growth
ELECTRICAL PROPERTIES:
■
Dielectric Strength: 8000 Volt
C
HOOSE
PVC
C
OATED
F
IBERGLASS
S
LEEVING
F
OR
:
■
High Temperature, Abrasion and
■
Oil Resistance
■
Resists Fraying, Bending and
Knotting
PVC C
OATED
F
IBERGLASS
S
LEEVING
A
PPLICATIONS
:
■
Flexible Wire Harnessing
FLAME RESISTANT:PIF-130 is a woven
fiberglass braid impregnated with a heat
resistant, extremely tough and flexible plastic
insulation. The fiberglass is treated to remove
all organic matter and resist fraying.
Completely compatible with all insulation and
conductor types.
S
PECIFICATIONS
■
UL Standard 1441
■
MIL-I-3190E
■
NEMA, VS-1
®
UL STANDARD 1441
MIL-I-3190E
PIF-130-20 0.034 0,86 100, 500, 1000
PIF-130-18 0.042 1,07 100, 500, 1000
PIF-130-16 0.053 1,35 100, 1000
PIF-130-14 0.066 1,68 100
PIF-130-12 0.085 2,16 100, 500
PIF-130-10 0.106 2,09 100, 500
PIF-130-8 0.133 3,38 100, 500
PIF-130-6 0.166 4,22 100, 250
PIF-130-4 0.208 5,28 100, 250
PIF-130-2 0.263 6,68 100, 250
PIF-130-0 0.330 8,38 100
PIF-130-3/8 0.375 9,52 100
PIF-130-7/16 0.438 11,12 100
PIF-130-1/2A 0.500 12,70 100
PIF-130-5/8 0.625 15,88 100
PIF-130-3/4 0.750 19,05 100
PIF-130-7/8 0.875 22,22 100
PIF-130-1
IN 1.000 25,40 100
Alpha Part No. Nominal Standard
and Size Inside Diameter Put-Up
(AWG or Inches) Inches mm Spools (Ft.)
Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923 Web Site: www.alphawire.com
Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433 Email: info@alphawire.com
WIRE MANAGEMENT PRODUCTS
SILICONE COATED FIBERGLASS SLEEVING
PIF-200
151
C
HARACTERISTICS
OPERATING TEMPERATURE:
■
–70°C to 200°C
VOLTAGE RATING:
■
600 Volt
COLOR DESCRIPTION:
■
All Standard Packages: Natural
PHYSICAL PROPERTIES:
■
Heat Aging: 1440 Hours at 235°C
Without Dielectric Change
■
Hardness: Shore A34
■
Flammability:Self-Extinguishing
(NEMA VS-1)
CHEMICAL PROPERTIES:
■
Corrosive Effect: Non-Corrosive
■
Fungus Resistance: No Growth
ELECTRICAL PROPERTIES:
■
Dielectric Strength: 8000 Volts
C
HOOSE
S
ILICONE
C
OATED
F
IBERGLASS
S
LEEVING
F
OR
:
■
High Flexible Routing
■
Extreme Abrasion Resistance
■
Superior Electrical Properties
S
ILICONE
C
OATED
F
IBERGLASS
S
LEEVING
A
PPLICATIONS
:
■
High/Low Temperature Wire
■
Harnesses
■
High/Low Temperature
Cable Connections
■
Component Covering
S
PECIFICATIONS
■
UL Standard 1441
■
MIL-I-3190E
■
NEMA, VS-1
UL STANDARD 1441
MIL-I-3190E
PIF-200-24 0.024 0,61 100, 500, 1000
PIF-200-22 0.029 0,74 100, 500, 1000
PIF-200-20 0.036 0,91 100, 500, 1000
PIF-200-18 0.045 1,14 100, 500, 1000
PIF-200-17 0.050 1,27 500, 1000
PIF-200-16 0.056 1,42 100, 500, 1000
PIF-200-15 0.063 1,60 100, 1000
PIF-200-14 0.069 1,75 100, 500
PIF-200-13 0.076 1,93 100, 500
PIF-200-12 0.085 2,16 100, 500
PIF-200-11 0.097 2,46 500
PIF-200-10 0.107 2,72 100, 500
PIF-200-9 0.119 3,02 100, 500
PIF-200-8 0.136 3,45 100, 500
PIF-200-7 0.151 3,84 100, 500
PIF-200-6 0.170 4,32 25, 100
PIF-200-5 0.190 4,83 25, 100
PIF-200-4 0.208 5,28 100
PIF-200-3 0.239 6,07 25, 100
PIF-200-2 0.268 6,81 25, 100
PIF-200-1 0.294 7,47 100
PIF-200-0 0.330 8,38 100
PIF-200-3/8 0.375 9,52 25, 100
PIF-200-7/16 0.438 11,12 25, 100
PIF-200-1/2A 0.500 12,70 25, 100
PIF-200-5/8 0.625 15,88 25, 100
Alpha Part No. Nominal Standard
and Size Inside Diameter Put-Up
(AWG or Inches) Inches mm Spools (Ft.)
®
HIGH HEAT, SUPERIOR ELECTRICAL
CHARACTERISTICS:A closely woven, braided
fiberglass, uniformly coated with silicone
rubber. Provides low temperature flexibility –
70°C, and heat protection to 200°C.
The fiberglass sleeving material is heat-set,
cuts cleanly and will not fray. PIF-200 is easy
to handle and extremely tough with superior
physical and electrical properties. Easy to
“pushback” and form over components,
connections and cables.
Web Site: www.alphawire.com Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923
Email: info@alphawire.com Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433
WIRE MANAGEMENT PRODUCTS
UNCOATED FIBERGLASS SLEEVING
PIF-240
152
C
HARACTERISTICS
OPERATING TEMPERATURE:
■
–60°C to 648°C (1200°F)
COLOR DESCRIPTION:
■
All Standard Packages: Natural
PHYSICAL PROPERTIES:
■
Flammability: Self-Extinguishing
(UL VW-1)
CHEMICAL PROPERTIES:
■
Corrosive Effect: Non-Corrosive
■
Fungus Resistance: No Growth
C
HOOSE
U
NCOATED
F
IBERGLASS
S
LEEVING
F
OR
:
■
Extreme Flexibility
■
Extreme Heat Environments
U
NCOATED
F
IBERGLASS
S
LEEVING
A
PPLICATIONS
:
■
High Temperature Wire Harnesses
■
High Temperature Cable
Connections
■
Component Covering
FLEXIBLE, ABRASION RESISTANT:
Extremely flexible, abrasion resistant sleeving,
ideal for applications necessitating operation
up to 648°C (1200°F).
Heat treated to remove all organic matter.
Completely compatible with all insulation
and conductor types.
S
PECIFICATIONS
■
UL Standard 1441
■
NEMA, VS-1
®
UL STANDARD 1441
PIF-240-20 0.034 0,86 100
PIF-240-18 0.042 1,07 100
PIF-240-16 0.053 1,35 100
PIF-240-15 0.059 1,50 100
PIF-240-14 0.066 1,68 100
PIF-240-12 0.085 2,16 100
PIF-240-11 0.095 2,41 100
PIF-240-10 0.106 2,69 100
PIF-240-9 0.118 3,00 100
PIF-240-8 0.133 3,38 100
PIF-240-7 0.148 3,76 100
PIF-240-6 0.166 4,22 100
PIF-240-5 0.186 4,72 100
PIF-240-4 0.208 5,28 100
PIF-240-3 0.234 5,94 100
PIF-240-2 0.263 6,68 100
PIF-240-1 0.294 7,47 100
PIF-240-0 0.330 8,38 100
PIF-240-3/8 0.375 9,52 100
PIF-240-7/16 0.438 11,12 100
PIF-240-1/2A 0.500 12,70 100
PIF-240-5/8 0.625 15,88 100
PIF-240-3/4 0.750 19,05 100
PIF-240-7/8 0.875 22,22 100
PIF-240-1
IN 1.000 25,40 100
Alpha Part No. Nominal Standard
and Size Inside Diameter Put-Up
(AWG or Inches) Inches mm Spools Ft.
Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923 Web Site: www.alphawire.com
Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433 Email: info@alphawire.com
C
HARACTERISTICS
OPERATING TEMPERATURE:
■
–70°C to 125°C
COLOR DESCRIPTION:
■
GRP-110NF: Black
■
GRP-120NF: Black with White Tracer
PHYSICAL PROPERTIES:
■
Withstands Short Term Exposure
to 230°C
■
GRP-120NF Passes UL VW-1
Flame Test
CHEMICAL PROPERTIES:
■
Not Affected by Most Chemical Environments
and Common Solvents (Freon, Detergents,
Soaps, Bleaches and Water)
■
Fungus Resistance: No Growth
C
HOOSE
GRP NF F
OR
:
■
Frayless Cuts WITHOUT A HOT KNIFE!
■
Frequent Expansion at Scissor Cut Ends
Without Fraying!
■
Lightweight, Flexible Routing
■
Use with Automatic Cutting Machines
■
Use with
XTRAGUARD®Flexible Cables
GRP NF A
PPLICATIONS
:
■
Field Installation Without Hot Knife
■
Protection of Wire, Cable and Hoses
■
Wire Bundling & Harnessing
■
Wire Splices
S
PECIFICATIONS
■
MIL-I-631D
®
GGRRPP--111100NNFF1188GGRRPP--112200NNFF11881/8 0.093 2,36 0.250 6,35 0.027 0,69 100, 500
GGRRPP--111100NNFF1144GGRRPP--112200NNFF11441/4 0.125 3,18 0.440 11,09 0.027 0,69 100, 500
GGRRPP--111100NNFF1122GGRRPP--112200NNFF11221/2 0.250 6,35 0.750 19,05 0.027 0,69 100, 500
GGRRPP--111100NNFF3344GGRRPP--112200NNFF33443/4 0.500 12,70 1.250 31,75 0.027 0,69 100, 500
GGRRPP--111100NNFF111144GGRRPP--112200NNFF1111441-1/4 0.750 19,05 1.750 44,45 0.027 0,69 50, 250
GGRRPP--111100NNFF111122GGRRPP--112200NNFF1111221-1/2 1.250 31,75 2.750 69,85 0.027 0,69 50, 250
Minimum Maximum Nominal
General Flame Supplied Expanded Wall Spools
Purpose Retardant I.D. I.D. Thickness Total
Alpha Part No. Alpha Part No. Size Inches mm Inches mm Inches mm Ftg.
Alpha’s GRP NF is a braided sleeving designed not to fray
when cut with ordinary scissors or when repeatedly expanded and retracted.
This product DOES NOT REQUIRE A HOT KNIFE WHEN CUTTING!
Ends remain clean after installation in the field as well as on the bench.
Can be used on automated cutting machines.
WIRE MANAGEMENT PRODUCTS
NON-FRAYING, EXPANDABLE BRAID SLEEVING
GRP-110NF, 120NF
153
UL VW-1
MIL-I-631D
Web Site: www.alphawire.com Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923
Email: info@alphawire.com Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433
WIRE MANAGEMENT PRODUCTS
EXPANDABLE BRAIDED POLYESTER SLEEVING
GRP-110, 120
C
HARACTERISTICS
OPERATING TEMPERATURE:
■
–70°C to 125°C
COLOR DESCRIPTION:
■
GRP-110: Black, Natural
■
GRP-120: Black, White
PHYSICAL PROPERTIES:
■
Withstands Short Term Exposure
to 230°C
■
GRP-120 Passes UL VW-1 Flame Test
CHEMICAL PROPERTIES:
■
Not Affected by Most Chemical
Environments and Common Solvents
(Freon*, Detergents, Soaps,
Bleaches and Water)
■
Fungus Resistance: No Growth
C
HOOSE
E
XPANDABLE
B
RAIDED
P
OLYESTER
S
LEEVING
F
OR
:
■
Lightweight, Flexible Routing
■
High Abrasion and Cut-Through
Resistance
■
Rot-Free/Fungus-Proof
Applications
E
XPANDABLE
B
RAIDED
P
OLYESTER
S
LEEVING
A
PPLICATIONS
:
■
Cut-Resistant Covering for Wire,
■
Cable and Hoses
■
Wire Bundling and Harnessing
■
Jacket for Flat Cable
S
PECIFICATIONS
■
MIL-I-631D
GRP-110-1/8 GRP-120-1/8 0.093 2,36 0.250 6,35 0.025 0,63 100, 500
GRP-110-1/4 GRP-120-1/4 0.125 3,18 0.437 11,09 0.025 0,63 100, 500
GRP-110-1/2 GRP-120-1/2 0.250 6,35 0.750 19,05 0.025 0,63 100, 500
GRP-110-3/4 GRP-120-3/4 0.500 12,70 1.250 31,75 0.025 0,63 100, 500
GRP-110-1-1/4 GRP-120-1-1/4 0.750 19,05 1.750 44,45 0.025 0,63 50, 250
GRP-110-1-3/4 GRP-120-1-3/4 1.250 31,75 2.750 69,85 0.025 0,63 50, 250
GRP-110-2 GRP-120-2 1.500 38,10 3.500 88,90 0.025 0,63 50, 250
*Registered trademark of E.I. DuPont Co.
General Flame Minimum Maximum Nominal Standard
Purpose Retardant Supplied Expanded Wall Put-Up
Alpha Part No. Alpha Part No. I.D. I.D. Thickness Spools
and Size and Size Inches mm Inches mm Inches mm Ft.
EXPANDS AND GRIPS:
Alpha GRP is a lightweight, expandable woven
polyester sleeving that offers high flexibility
with high resistance to abrasion and cut-
through. The open weave allows for a great
range of expansion of the sleeving diameter,
thus ensuring ease of installation and gripping
action over a wide range of shapes and sizes.
GRP sleeving is an ideal protective sleeve for
wire bundles, harnesses, pneumatic hoses,
hydraulic lines and highly polished or threaded
machine parts.
To prevent fraying of ends, GRP-110, 120
should be cut/sealed with a hot knife.
®
See Our Non-Fraying
GRP-110NF
and
GRP-120NF
(Page 153) ...
CAN BE CUT WITHOUT A HOT KNIFE!
154
Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923 Web Site: www.alphawire.com
Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433 Email: info@alphawire.com
MIL-I-631D
C
HARACTERISTICS
OPERATING TEMPERATURE:
■
–70°C to 125°C
COLOR DESCRIPTION:
■
All Standard Packages:Black
PHYSICAL PROPERTIES:
■
Withstands Intermittent Exposure
to 140°C
■
Melt Temperature: 250°C
■
Tensile Strength: 100,000 psi
■
Cycle Life: Up to 10,000 Cycles
CHEMICAL PROPERTIES:
■
Resistant to Most Chemicals:
Acetone, Acids, Hydrocarbons,
Trichlorethylene, Alcohol
■
Fungus Resistance: No Growth
C
HOOSE
E
XPANDABLE
P
OLYESTER
W
EBBED
S
LEEVING
F
OR
:
■
Unlimited Breakouts
■
Abrasion, Cut-Through Resistance
■
Oil and Solvent Resistance
E
XPANDABLE
P
OLYESTER
W
EBBED
S
LEEVING
A
PPLICATIONS
:
■
Cut-Resistant Covering for Wire,
■
Cable and Hoses
■
Wire Bundling and Harnessing
EXPANDS, GRIPS AND HARNESSES:
Alpha’s ZIP-GRP expandable webbing offers
superb flexibility and high tensile strength
while providing added protection against
flame, chemicals and abrasion. With its velcro-
type enclosure, wires, cable assemblies and
wire harnesses are always accessible and can
be easily opened for any number of breakouts.
To prevent fraying of ends, ZIP-GRP should be
cut/sealed with a hot knife.
S
PECIFICATIONS
■
MIL-I-631D
ZIP-GRP-7/8 0.750 19,1 1.000 25,4 0.025 0,635 2.500 63,5 25, 50
ZIP-GRP-1-1/2 1.000 25,4 2.000 50,8 0.025 0,635 3.750 95,3 25, 50
ZIP-GRP-2 1.500 38,1 2.125 53,9 0.025 0,635 5.000 127,0 25, 50
Minimum Maximum Typical Nominal Standard
Alpha Supplied Expanded Wall Flat Put-Up
Part No. I.D. I.D. Thickness Width Spools
and Size Inches mm Inches mm Inches mm Inches mm Ft.
155
WIRE MANAGEMENT PRODUCTS
EXPANDABLE POLYESTER WEBBED SLEEVING
ZIP-GRP
MIL-I-631D
Web Site: www.alphawire.com Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923
Email: info@alphawire.com Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433
C
HARACTERISTICS
OPERATING TEMPERATURE:
■
–20°C to 105°C
COLOR DESCRIPTION:
■
All Standard Packages: Black
PHYSICAL PROPERTIES:
■
Tensile Strength: 2500 psi,
(177 kg/cm2)
■
Ultimate Elongation: 300%
■
Wall Thickness: 0.020” (0,51mm)
■
Track Thickness: (When Closed)
0.150 Inches (3,8mm)
■
Flammability:Self-Extinguishing
(UL VW-1)
CHEMICAL PROPERTIES:
■
Fungus Resistance: No Growth
C
HOOSE
Z
IPPER
T
UBING
F
OR
:
■
Protection Against Flame,
■
Chemicals and Abrasion
Z
IPPER
T
UBING
A
PPLICATIONS
:
■
Wire/Cable Bundling
■
Cable Jacketing Protection
S
PECIFICATIONS
■
UL Standard 224
■
MIL-I-631D
ZIP-41-1/2 1/2 12,7 2 50,8 25, 100
ZIP-41-5/8 5/8 15,8 2-3/8 60,3 25, 100
ZIP-41-3/4 3/4 19,0 2-3/4 69,8 25, 100
ZIP-41-7/8 7/8 22,2 3-1/8 79,8 25, 100
ZIP-41-1 1 25,4 3-9/16 90,4 25, 100
ZIP-41-1-1/4 1-1/4 31,7 4-1/8 104,7 25, 100
ZIP-41-1-1/2 1-1/2 38,1 4-7/8 123,8 25, 100
ZIP-41-1-3/4 1-3/4 44,4 5-5/8 142,8 25, 100
ZIP-41-2 2 50,8 6-3/8 161,9 25, 100
ZIP-41-2-1/4 2-1/4 57,1 7-1/2 190,5 25, 100
ZIP-41-3 3 76,2 10 254,0 25, 100
Nominal Nominal Standard Package
Alpha Part No. Inside Diameter Flat Width Spool
and Size Inches mm Inches mm Lengths (Ft.)
®
WIRE, CABLE, HARNESS
PROTECTION:
Alpha Zipper Tubing is
designed to provide a
professional finish to wiring
installations by eliminating
exposed wiring and provid-
ing added protection
against flame, chemicals
and abrasion. With Zipper Tubing, it’s possible to isolate any group of wires or cables quickly and easily,
without the bother of tape wrapping.
Zipper Tubing is manufactured from the highest quality, high temperature, stabilized PVC. The combina-
tion of flame, oil, fungus and moisture resistance, coupled with excellent abrasion resistance,makes Zipper
Tubing an ideal jacketing material for use in harsh environments.
Supplied flat on a spool for ease of storage and accessibility, Alpha Zipper Tubing is an ideal jacketing mate-
rialfor use in the production or repair of pre-wired harness assemblies.
Each package contains two plastic sliders (AB 395).
Loc-Trac
®
provides an effective closure that is ideal
for use where the assembly will be subjected to
random flexing.
WIRE MANAGEMENT PRODUCTS
ZIPPER TUBING
ZIP-41
156
UL STANDARD 224
Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923 Web Site: www.alphawire.com
Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433 Email: info@alphawire.com
C
HARACTERISTICS
OPERATING TEMPERATURE:
■
Polyethylene: –20°C to 80°C
■
Nylon: –40°C to 120°C
■
Teflon*: –70°C to 250°C
■
PVC: –20°C to 80°C
COLOR DESCRIPTION:
■
SW-1 to 6, SW-20 to 25 and SW-30 to 35: Natural
■
SW-10 to 14: White
■
SW-40 to 45 and SW-50 to 53: Black
S
PIRAL
W
RAP
T
UBING
A
PPLICATIONS
:
■
Wire Harness Breakouts
■
Cable Bundling
SPIRAL CUT FOR HARNESS BREAKOUTS:
Wire harnessing, cabling and bundling work is simplified with the use of
Alpha’s SW series spiral wrap tubing. SW tubing wraps tightly to the wire
and cable being bundled, yet is flexible and simple to apply. All types
maintain flexibility even when bent around sharp edges. Breakouts or
tapoff connections may be made through the openings of the wrap. SW
spiral wrap is constructed from several semi-rigid tubing materials and
then cut on a continual spiral.
SSWW--111/8 CCLLEEAARR PPOOLLYYEETTHHYYLLEENNEE25, 100, 500 80°C 20°C 0.125 0.031 1/2 Not
SSWW--221/4 Ideal for general indoor 25, 100, 500 (176°F) (4°F) 0.250 0.046 2 Flame
SSWW--333/8 applications. This cost- 25, 100 0.375 0.052 3 Retardant.
SSWW--441/2 effective material is extremely 25, 100 0.500 0.062 4
SSWW--553/4 abrasion resistant and is 25, 100, 500 0.750 0.065 5
SSWW--661 unaffected by most solvents. 25, 100, 500 1.000 0.095 6
SSWW--11001/8 FFIIRREE RREESSIISSTTAANNTT25, 100, 500 80°C 20°C 0.125 0.031 1/2 94V-0
SSWW--11111/4 PPOOLLYYEETTHHYYLLEENNEE25, 100, 500 (176°F) (4°F) 0.250 0.046 2
SSWW--11223/8 A cost-effective alternative to 25, 100 0.375 0.052 3
SSWW--11331/2 Nylon or Teflon*. This special 25, 100 0.500 0.062 4
SSWW--11443/4 material is self-extinguishing. 25, 100 0.750 0.065 5
SSWW--22001/8 NNYYLLOONN25, 100, 500 120°C 40°C 0.125 0.016 1/2 94V-2
SSWW--22111/4 Highly specialized product 25, 100, 500 (176°F) (40°F) 0.250 0.025 2
SSWW--22223/8 that is tough, durable, self- 25, 100 0.375 0.035 3
SSWW--22331/2 extinguishing, abrasion resis- 25, 100 0.500 0.035 4
SSWW--22443/4 tant, lightweight. Operates 25, 100 0.750 0.032 5
SSWW--22551 over a wide temp. range. 25, 100 1.000 0.032 6
SSWW--33001/8 TTEEFFLLOONN* 25, 100 250°C 70°C 0.125 0.030 1/2 Self
SSWW--33111/4 Self extinguishing, fluorocarbon, 25, 100 (482°F) (94°F) 0.250 0.030 2 Extinguish-
SSWW--33223/8 resin material. Possesses 25, 100 0.375 0.030 2-1/2 ing.
SSWW--33331/2 greatest min. & max. temp. 25, 100 0.500 0.030 3
SSWW--33443/4 range of any spiral wrap 25, 100 0.750 0.032 3-1/2
SSWW--33551 material. Suitable for use in a 25, 100 1.000 0.040 4
number of industrial applications.
SSWW--44001/8 UULLTTRRAAVVIIOOLLEETT--RREESSIISSTTAANNTT25, 100, 500 80°C 20°C 0.125 0.030 1/2 Not
SSWW--44111/4 BBLLAACCKK PPOOLLYYEETTHHYYLLEENNEE25, 100, 500 (176°F) (4°F) 0.250 0.045 2 Flame
SSWW--44223/8 Recommended for outdoor use. 25, 100 0.375 0.050 3 Retardant.
SSWW--44331/2 Same properties as clear 25, 100 0.500 0.060 4
SSWW--44443/4 polyethylene but contains extra 25, 100, 500 0.750 0.065 5
SSWW--44551 additive for moisture resistance 25, 100, 500 1.000 0.095 6
ultraviolet light and rain.
SSWW--55001/8 PPVVCC25, 100 80°C 20°C 0.125 0.032 1/2 Self
SSWW--55111/4 Superior taber abrasion 25, 100 (176°F) (4°F) 0.250 0.045 2 Extinguish-
SSWW--55223/8 resistance, tensile strength, 25, 100 0.375 0.052 2-1/2 ing.
SSWW--55331/2 thermal, mechanical & electrical 25, 100 0.500 0.062 3
properties. Self-extinguishing
flexible product.
Nominal Max. Diam.
Standard Max. Min.
Nom. Wall
Inner Wire
Alpha Size Put-Up Oper. Oper. O.D. Thickness Bundle Flamma-
Part No. In. Standard Materials Ft. Temp. Temp. Inches Inches Inches bility
157
WIRE MANAGEMENT PRODUCTS
SPIRAL WRAP TUBING
SW
*Registered trademark of E.I. DuPont Co.
Web Site: www.alphawire.com Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923
Email: info@alphawire.com Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433
WIRE MANAGEMENT PRODUCTS
LACING CORD AND TAPE
LC
158
C
HARACTERISTICS
COLOR DESCRIPTION:
■
All Standard Packages:White, Black
C
HOOSE
L
ACING
C
ORD
AND
T
APE
F
OR
:
■
High Tensile Strength
■
Good Chemical Resistance
■
Excellent Abrasion Resistance
■
Excellent Knot Retention
L
ACING
C
ORD AND
T
APE
A
PPLICATIONS
:
■
Bundling Military Wire Harnesses
HIGH TENSILE STRENGTH,
KNOT RETENTION:
Designed to allow a wider contact area with
the insulation so that it remains in place, tape
is flexible and easy on the assembler’s hands.
Once knotted, tape resists slipping and does
not increase diameter of harness. Nylon has
excellent tensile strength and resists acids,
abrasion, flame and fungus. Polyester has
all the characteristics of Nylon, but has better
resistance to acids, and no appreciable
discoloration.
S
PECIFICATIONS
■
MIL-T-43435
MIL-T-43435
LC-132 I 3 C (GE) 50 0.085 2,16 0.014 0,35 Nylon
LC-134 I 4 B (MW) 30 0.060 1,52 0.012 0,30 Nylon
LC-136 I 3 B (MW) 50 0.085 2,16 0.014 0,35 Nylon
LC-140 I 3 F (SR) 50 0.085 2,16 0.014 0,35 Nylon
LC-143 I 3 E (AM) 50 0.085 2,16 0.014 0,35 Nylon
LC-162 II 3 B (MW) 50 0.085 2,16 0.014 0,35 Polyester
FINISHES:
GE:
A synthetic rubber-like resin formulated with a non-mercuric compound which lends the finish
fungicidal properties. This finish permits easier handling and better knot retention. This finish has
a melting point in excess of 190°F and will soften, but not flow, at 140°F.
MW:
A micro-crystalline wax with a melting point above 130°F compounded with a fungicide
which does not contain either copper or mercuric materials. Excellent knot retention, yet finish does
not have too great a “waxy” feel to the user. MW is soft, pliable, easy to tie.
AM:
A thermoplastic synthetic resin with a melting point above 350°F for use where a “wax free” type
is specified. It is a non-dusting or flaking, dry finish with good knot tying qualities.
SR:
A special continuous coating of fungistatic synthetic rubber containing no corrosive compounding
ingredients. Knots tied with this finish will not slip. This finish will not flake or dust.
MIL-T-43435 Tensile Nom. Nom.
Alpha Designation Strength Width Thickness
Part No. Type Size Finish Lbs. Inches mm Inches mm Material
NYLON AND DACRON FLAT BRAIDED TAPE
A
VAILABILITY
■
500 yard spools
Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923 Web Site: www.alphawire.com
Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433 Email: info@alphawire.com
1221 0.025 0,63 0.015 0,38 36 8 8 27 200 4 100, 500, 1000
1222 1/32 0,79 0.020 0,50 36 16 16 24 400 6 100, 500, 1000
1223† 3/64 1,19 0.020 0,50 36 24 24 22 600 7 100, 500, 1000
1224 3/32 2,38 0.020 0,50 36 16 48 19 1200 11 100, 500, 1000
1229† 1/8 3,18 0.020 0,50 36 24 72 18 1800 16 100, 500, 1000
1230† 3/16 4,76 0.020 0,50 36 24 120 15 3000 25 100, 500, 1000
1231† 1/4 6,35 0.030 0,76 36 24 168 14 4200 32 100, 500, 1000
1232 3/8 9,53 0.030 0,76 36 48 288 12 7200 46 100, 500, 1000
1233/2 1/2 12,70 0.030 0,76 36 48 384 10 9600 53 100, 500, 1000
1233† 5/8 15,90 0.030 0,76 36 48 384 10 9600 53 100, 500, 1000
1234 3/4 19,10 0.040 1,02 36 48 864 7 20800 85 100, 500, 1000
1235 1 25,40 0.045 1,14 36 48 864 7 20800 85 100, 500, 1000
1239† 1-3/8 34,90 0.050 1,27 30 48 336 5 33700 100 100, 500, 1000
1240† 1-1/2 38,10 0.060 1,52 30 48 528 3 53064 150 100
1241 1-3/4 44,50 0.080 2,03 30 48 1248 2/0 125424 280 100
1242 2 50,80 0.120 3,05 30 48 1436 3/0 154368 310 100
1242/4 3 76,20 0.200 5,08 30 48 2256 4/0 225000 390 100
Braid Construction Nom. Approx. Standard
Nom. Nom. AWG of Total No. Approx. Circular Current Package
Alpha Flat Width Thickness Indiv. of Indiv. AWG Mil Area, Carrying Cap. Spools
Part No. Inches mm Inches mm Ends Carriers Ends Equiv. CM (Amps)
♦
Ft.
WIRE MANAGEMENT PRODUCTS
TINNED COPPER BRAID
FLAT, OVAL
159
C
HARACTERISTICS
PRODUCT DESCRIPTION:
■
Flat or Oval Shaped Tinned
■
Copper Braid
S
PECIFICATIONS
■
QQ-W-343E
■
ASTM-B-33
† Meets QQ-B-575B
C
HOOSE
T
INNED
C
OPPER
B
RAID
F
OR
:
■
Ground/Shielding Terminations
T
INNED
C
OPPER
B
RAID
A
PPLICATIONS
:
■
Point-to-Point Ground Path
■
Wire/Cable Shielding
SHIELDING, GROUND STRAP:
A tight weave of multi-strand, soft drawn
tinned copper wire; tinned copper braid is an
ideal shielding material for short-run cables pro-
viding easy radial termination. In retrofit appli-
cations, provides additional shielding
efficiency. Tinned copper flat braid, used
as a ground strap, provides an excellent, low-
resistance ground path.
QQ-W-343E
QQ-B-575B
2132 1/16 1,59 34 16 32 19 1192 11 100, 500, 1000
2138 11/64 4,37 34 24 120 14 4770 32 100, 500, 1000
2140 3/16 4,76 34 24 144 13 5724 38 100, 500
2142 1/4 6,35 34 24 168 12 6678 41 100, 500
2144 3/8 9,53 34 24 192 11 7632 46 100, 500
2146 1/2 12,70 34 48 336 9 13356 62 100
2148 5/8 15,88 34 48 384 8 14264 64 100
2150 11/16 17,46 34 48 480 7 19080 81 100
2152 25/32 19,84 34 48 528 7 20988 85 100
Approx.
Nom. I.D. Braid Construction Nom. Current Standard
When AWG of Total No. Approx. Circular Carrying Package
Alpha Rounded Indiv. of Indiv. AWG Mil Area, Cap. Spools
Part No. Inches mm Ends Carriers Ends Equiv. CM (Amps)
♦
Ft.
♦Values shown are for bare cable in free air at 30°C (86°F) and intended as a reference guide only.
Actual values will depend on permissible temperature rise, permissible voltage drop and other
conditions of service.
TINNED COPPER FLAT BRAID
TINNED COPPER OVAL BRAID
Web Site: www.alphawire.com Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923
Email: info@alphawire.com Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433
WIRE MANAGEMENT PRODUCTS
TINNED/SILVER COPPER BRAID
TUBULAR
160
C
HARACTERISTICS
PRODUCT DESCRIPTION:
■
Tubular Shaped, Tinned or
■
Silver-Plated Copper Braid
S
PECIFICATIONS
■
QQ-W-343E
■
QQ-B-575B
■
ASTM-B-33
C
HOOSE
T
INNED
C
OPPER
B
RAID
F
OR
:
■
Ground/Shielding Terminations
T
INNED
C
OPPER
B
RAID
A
PPLICATIONS
:
■
Point-to-Point Ground Path
■
Wire/Cable Shielding
SHIELDING, GROUND STRAP:
A tight weave of multi-strand, soft drawn
tinned copper wire; tinned copper braid is an
ideal shielding material for short-run cables
providing easy radial termination. In retrofit
applications, provides additional shielding
efficiency. Tinned copper flat braid, used
as a ground strap, provides an excellent,
low- resistance ground path.
QQ-B-575B
QQ-W-343E
2160 1/32 0,79 36 24 24 22 600 7.0 100, 250
2162 1/16 1,59 36 24 48 19 1200 11.0 100, 250
2163 5/64 1,98 36 24 72 18 1800 16.0 100, 250
2164 7/64 2,78 36 24 96 16 2400 19.0 100, 250
2166 1/8 3,18 36 24 120 15 3000 25.0 100, 250
2167 5/32 3,97 36 24 240 12 6000 40.0 100, 250
2168 11/64 4,37 36 24 168 14 4200 32.0 100, 250
2170 13/64 5,16 34 24 192 11 7630 46.0 100
2171 1/4 6,35 36 24 384 10 9600 53.0 100
2171/1 9/32 7,14 30 24 120 9 12060 60.0 100
2172 3/8 9,53 36 48 384 10 9600 53.0 100
2173 7/16 11,11 30 24 240 6 24120 90.0 100
2174 1/2 12,70 36 48 528 9 13200 62.0 100
2175 9/16 14,29 30 48 480 3 48240 145.0 100
2175/1 21/32 16,67 30 48 768 1 77180 190.0 100
2176 25/32 19,84 36 48 864 7 21600 88.0 100
Approx.
Nom. I.D. Braid Construction Nom. Current Standard
When AWG of Total No. Approx. Circular Carrying Package
Alpha Rounded Indiv. of Indiv. AWG Mil Area, Cap. Spools
Part No. Inches mm Ends Carriers Ends Equiv. CM (Amps)
♦
Ft.
♦Values shown are for bare cable in free air at 30°C (86°F) and intended as a reference guide only.
Actual values will depend on permissible temperature rise, permissible voltage drop and other
conditions of service.
TINNED COPPER TUBULAR BRAID
2177 7/8 22,23 30 48 336 5 33700 100.0 100
2178 1 25,40 30 48 384 4 38600 120.0 100
2179 1-1/8 28,58 30 48 432 4 43330 130.0 100
2180 1-1/4 31,75 30 48 480 3 48150 145.0 100
2181 1-3/8 34,93 30 48 528 3 53000 150.0 100
2182 1-1/2 38,10 30 48 576 2 57775 165.0 100
EXTRA LARGE TINNED COPPER TUBULAR BRAID
2191 1/16 1,59 36 24 48 19 1200 11.0 100
2193 7/64 2,78 36 24 96 16 2400 19.0 100
2194 1/8 3,18 36 24 120 15 3000 25.0 100
2195 5/32 3,97 36 24 240 12 6000 40.0 100
2196 11/64 4,37 36 24 168 14 4200 32.0 100
2197 13/64 5,16 34 24 192 11 7640 46.0 100
2198 1/4 6,35 36 24 384 10 9600 53.0 100
SILVER-PLATED TUBULAR BRAID
Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923 Web Site: www.alphawire.com
Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433 Email: info@alphawire.com
