8798_AA's Vectron 05/30/02 3:11 PM Page 58 Temperature Compensated Crystal Oscillators (TCXO's) TC-400 (14/4 Single DIP Series) Description: Vectron International has introduced a series of Temperature Compensated Crystal Oscillators (TCXO's) available in frequencies from 2 to 160 MHz. Features: * Industry Standard 14/4 Single DIP package * Frequency from 2 to 160 MHz * 3.3 Vdc or 5 Vdc operation * All outputs Available (TTL, HCMOS, PECL, Sine) Performance Characteristics Parameter Characteristic Frequency: Supply Voltage (Vdd): (other options are available upon request) Current: Output Type: Temperature Stability: Note: Not all stabilities are available with all frequency/output combinations. Please consult the factory. Available from 2.0 MHz to 160 MHz 5.0 Vdc 5% 3.3 Vdc 5% Current draw will vary greatly depending on frequency and output type. For this series TCXO typical current draw will be about 15 mA. Please consult the factory about your exact current requirements. HCMOS/ACMOS 10 TTL PECL 0 dBm/50 ohm 2.0 to 160 MHz 2.0 to 160 MHz 10.0 to 160 MHz 16.384 to 77.76 MHz B-106 - 1.0 x 10-6 over 0C to +50C B-156 - 1.5 x 10-6 over 0C to +50C C-106 - 1.0 x 10-6 over 0C to +70C C-156 - 1.5 x 10-6 over 0C to +70C D-156 - 1.5 x 10-6 over -20C to +70C D-206 - 2.0 x 10-6 over -20C to +70C F-156 - 1.5 x 10-6 over -40C to +85C F-256 - 2.5 x 10-6 over -40C to +85C NOTE: Tighter stabilities and wider temperature ranges are available, please consult the factory. Aging (typical): Frequency vs. Supply: <10 ppm for ten years @ +70C <0.2 ppm for a 5% change in supply voltage Pin 1 Options: A = Electrical Frequency Adjust -- 10 ppm minimum via external voltage, 0 to Vdd - positive slope B = Tri-state -- HCMOS/TTL Enable/Disable -- PECL C = No connect -- Initial Accuracy 2.5 ppm @ +25C Package Size: 20.32 x 12.70 x 10.287 mm (0.80" x 0.50" x 0.405") Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * Web: www.vectron.com 58 8798_AA's Vectron 05/30/02 3:11 PM Page 59 Temperature Compensated Crystal Oscillators (TCXO's) TC-400 (14/4 Single DIP Series) Outline Drawing Standard Frequencies (MHz) 10.000 16.384 20.480 38.880 51.840 114.00 5.08 (.200) Pin Out 1 7 8 14 7 14 8 13.000 20.000 34.368 44.736 77.760 .051 Dia .002) (in.) Pin 1 12.800 19.440 27.000 40.000 60.000 155.52 TCXO Output Levels Function See pin 1 options Logic Sine Output Option A B F Output HCMOS/ACMOS 10 TTL PECL Voh min.. 0.8 (Vdd) +2.4 Vdc Vdd - 1.04 Vdc Vol max. +0.5 Vdc +0.5 Vdc Vcc -1.60 Vdc Load (typical) 100 k ohm // 10 pF 10 TTL 50 ohms to Vcc -2V Symmetry 50/50 10% 50/50 10% 50/50 10% Rise/Fall Time 5 ns max. 10 ns max. 3 ns max. Gnd Output Supply (Vdd) Output Option G Output Sinewave Level 0 dBm to +6 dBm Load 50 ohm Harmonics/subs -20 dBc max. Other Spurious -60 dBc max. Ordering Information TC 400 D A C 156 A 20.48 Product Family TC = TCXO Package 400 = 14/4 DIP Supply Voltage C = 5.0 Vdc 5% D = 3.3 Vdc 5% Output A = HCMOS/ACMOS B = 10 TTL D = PECL G = 0 dBm / 50 ohm MHz Output Frequency 2.0 MHz to 160 MHz Pin 1 Options A = Electrical Frequency Adjust (Default) B = Tri-state or Enable/Disable C = No Connect Temperature Range B-106 = 1.0x10-6 over 0C to +50C B-156 = 1.5x10-6 over 0C to +50C C-106 = 1.0x10-6 over 0C to +70C C-156 = 1.5x10-6 over 0C to +70C D-156 = 1.5x10-6 over -20C to +70C D-206 = 2.0x10-6 over -20C to +70C F-156 = 1.5x10-6 over -40C to +85C F-256 = 2.5x10-6 over -40C to +85C Note: Other stabilities are available upon request. Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * Web: www.vectron.com 59