Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors T495 Surge Robust Low ESR MnO2 Series Overview The low ESR, surge-robust T495 Series is designed for demanding applications that require high surge current and high ripple current capability. This series builds upon the proven capabilities of our industrial grade tantalum chip capacitors to offer several advantages such as low ESR, high ripple current capability, excellent capacitance stability, and improved resistance to high in-rush currents. These benefits are achieved though a combination of proprietary design, materials, and process parameters as well as high-stress, low impedance electrical conditioning performed prior to screening.This series is classified as MSL (Mositure Sensitivity Level) 1 under J STD 020: unlimited floor life time at 30C / 85% RH. Benefits Applications * * * * * * * * * * * * * * Typical applications include decoupling and filtering in industrial and automotive end applications, such as DC/DC converters, portable electronics, telecommunications, and control units requiring high ripple current capability. Meets or exceeds EIA Standard 535BAAC Taped and reeled per EIA 481-1 High surge current capability Optional gold-plated terminations High ripple current capability 100% surge current test on C, D, E, U, V, X sizes 100% steady-state accelerated aging Capacitance values of 0.1 F to 1,000 F Tolerances of 10% and 20% Voltage rating of 2.5 - 50 VDC Extended range values Available tested to DSCC 95158 RoHS Compliant and lead-free terminations Operating temperature range of -55C to +125C Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder SPICE For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 1 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Ordering Information T 495 X 107 M 010 A T E045 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material ESR Surge Robust Low ESR A, B, C, D, E, T, V, X First two digits represent significant figures. Third digit specifies number of zeros. K = 10% M = 20% T= Tantalum 2R5 = 2.5 V 004 = 4 V 006 = 6.3 V 010 = 10 V 016 = 16 V 020 = 20 V 025 = 25 V 035 = 35 V 050 = 50 V A = N/A T = 100% Matte Tin Last three (Sn) Plated digits specify H = Standard ESR in m. (45 Solder Coated = 45 m) (SnPb 5% Pb minimum) G = Gold Plated (A, B, C, D, X only) Packaging (C-Spec) Blank = 7" Reel 7280 = 13" Reel Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55C to 125C 0.47 - 1,000 F @ 120 Hz/25C K Tolerance (10%), M Tolerance (20%) 2.5 - 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01 CV (A) at rated voltage after 5 minutes (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 2 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Qualification Test Condition Characteristics C/C Endurance Storage Life Thermal Shock Temperature Stability 85C @ rated voltage, 2,000 hours. 125C @ 2/3 rated voltage, 2,000 hours. 125C @ 0 volts, 2,000 hours. MIL-STD-202, Method 107, Condition B, mounted, -55C to 125 C, 1,000 cycles. Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +125C, +25C. DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25C -55C +85C +125C C/C IL* 10% 10% 20% DF IL IL 1.5 x IL 1.5 x IL DCL IL n/a 10 x IL 12 x IL C/C Surge Voltage Mechanical Shock/Vibration Within 10% of initial value 25C and 85C, 1.32 x rated voltage 1,000 cycles (125C, 1.2 x rated voltage). MIL-STD-202, Method 213, Condition I, 100 G peak MIL-STD-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within 5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 3 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 1000 10 T495C476M016ATE350_IMP T495C476M016ATE350 T495D157M016ATE085_IMP T495D157M016ATE085 T495X227M016ATE100 T495X227M016ATE100_IMP Capacitance (F) Impedance, ESR (Ohms) 100 T495C476M016ATE350_ESR T495D157M016ATE085_ESR T495X227M016ATE100_ESR 1 100 10 0.1 0.01 1 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions - Millimeters (Inches) Metric will govern Termination cutout at KEMET's option, either end Case Size Component F* 0.1 S* 0.3 B* 0.15 (.004) (.012) (Ref) .006 KEMET EIA L* W* H* X (Ref) P (Ref) R (Ref) T (Ref) A 3216-18 3.2 0.2 (.126 .008) 1.6 0.2 (.063 .008) 1.6 0.2 (.063 .008) 1.2 (.047) 0.8 (.031) B 3.5 0.2 3528-21 (.138 .008) 2.8 0.2 (.110 .008) 1.9 0.2 (.075 .008) 2.2 (.087) 0.8 (.031) C 6032-28 6.0 0.3 (.236 .03) 3.2 0.3 (.126 .012) 2.5 0.3 (.098 .012) 2.2 (.087) D 7.3 0.3 7343-31 (.287 .012) 4.3 0.3 (.169 .012) 2.8 0.3 (.110 .012) 2.4 (.094) X 7.3 0.3 7343-43 (.287 .012) 4.3 0.3 (.169 .012) 4.0 0.3 (.157 .012) 2.4 (.094) E 7.3 0.3 7360-38 (.287 .012) 6.0 0.3 (.236 .012) 3.6 0.2 (.142 .008) T 3.5 0.2 3528-12 (.138 .008) 2.8 0.2 (.110 .008) V 7.3 0.3 7343-20 (.287 .012) 4.3 0.3 (.169 .012) A (Min) G (Ref) E (Ref) 0.4 (.016) 0.10 0.10 (.004 .004) 0.4 (.016) 0.4 (.016) 0.13 (.005) 0.4 (.016) 0.10 0.10 (.004 .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 4.1 (.161) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.2 (.047) 2.2 (.087) 0.8 (.031) N/A 0.05 (.002) N/A N/A 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087) 2.0 (.079) 2.4 (.094) 1.3 (.051) N/A 0.05 (.002) N/A N/A 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 0.8 (.31) 1.1 (.043) 1.3 (.051) Notes: (Ref) - Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch. * MIL-PRF-55365/8 specified dimensions (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 4 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference Rated Rated Case Code/ Voltage Cap Case Size VDC F KEMET/EIA 2.5 2.5 2.5 2.5 2.5 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 100 220 470 1000 1000 6.8 22 68 68 100 100 150 150 150 220 220 220 330 330 330 330 330 470 470 470 470 470 470 680 680 680 1000 1000 1000 1000 1000 1000 1000 1000 6.8 6.8 6.8 6.8 10 10 10 10 22 22 22 22 T/3528-12 D/7343-31 D/7343-31 X/7343-43 X/7343-43 A/3216-18 C/6032-28 T/3528-12 V/7343-20 B/3528-21 D/7343-31 B/3528-21 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 A/3216-18 A/3216-18 A/3216-18 C/6032-28 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 C/6032-28 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR (See below for part options) T495T107(M)2R5A(2)E3K0 T495D227(1)2R5A(2)E045 T495D477(1)2R5A(2)E035 T495X108(1)2R5A(2)E030 T495X108(1)2R5A(2)E040 T495A685(1)004A(2)E2K0 T495C226(1)004A(2)E380 T495T686(1)004A(2)E1K5 T495V686(1)004A(2)E150 T495B107(1)004A(2)E500 T495D107(1)004A(2)E800 T495B157(M)004A(2)E900 T495C157(1)004A(2)E070 T495C157(1)004A(2)E250 T495D227(1)004A(2)E040 T495D227(1)004A(2)E050 T495D227(1)004A(2)E100 T495C337(1)004A(2)E300 T495C337(1)004A(2)E700 T495D337(1)004A(2)E030 T495D337(1)004A(2)E045 T495D337(1)004A(2)E100 T495D477(1)004A(2)E045 T495D477(1)004A(2)E100 T495X477(1)004A(2)E030 T495X477(1)004A(2)E045 T495X477(1)004A(2)E060 T495X477(1)004A(2)E100 T495X687(1)004A(2)E040 T495X687(1)004A(2)E060 T495X687(1)004A(2)E100 T495X108(1)004A(2)E030 T495X108(1)004A(2)E040 T495X108(1)004A(2)E060 T495X108(1)004A(2)E070 T495X108(1)004A(2)E090 T495X108(1)004A(2)E100 T495E108(1)004A(2)E035 T495E108(1)004A(2)E050 T495A685(1)006ATE1K8 T495A685(1)006ATE2K0 T495A685(1)006A(2)E4K5 T495C685(1)006A(2)E480 T495A106(1)006A(2)E800 T495A106(1)006A(2)E1K0 T495A106(1)006A(2)E1K5 T495A106(1)006A(2)E2K0 T495A226(1)006A(2)E500 T495A226(1)006A(2)E900 T495A226(1)006A(2)E1K5 T495C226(1)006A(2)E380 (See below for part options) Amps +20C Max/5 Min 2.5 5.5 11.8 25.0 25.0 0.5 0.9 2.7 2.7 4.0 4.0 6.0 6.0 6.0 8.8 8.8 8.8 13.2 13.2 13.2 13.2 13.2 18.8 18.8 18.8 18.8 18.8 18.8 27.2 27.2 27.2 40.0 40.0 40.0 40.0 40.0 40.0 40.0 40.0 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 1.4 1.4 1.4 1.4 Amps +20C Max/5 Min % @ +20C 120 Hz Max 24.0 8.0 8.0 15.0 15.0 6.0 6.0 20.0 6.0 8.0 6.0 12.0 12.0 8.0 8.0 8.0 8.0 10.0 12.0 8.0 8.0 8.0 12.0 12.0 8.0 8.0 10.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 6.0 % @ +20C 120 Hz Max m @ 20C 100 kHz Max 3000 45 35 30 40 2000 380 1500 150 500 800 900 70 250 40 50 100 300 700 30 45 100 45 100 30 45 60 100 40 60 100 30 40 60 70 90 100 35 50 1800 2000 4500 480 800 1000 1500 2000 500 900 1500 380 m @ 20C 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (mA) 100 kHz +25C 153 1826 2070 2345 2031 194 538 216 913 412 433 307 1254 663 1936 1732 1225 606 396 2236 1826 1225 1826 1225 2345 1915 1658 1285 2031 1658 1285 2345 2031 1658 1535 1354 1285 2390 2000 204 194 129 479 306 274 224 194 387 289 224 538 (mA) 100 kHz +25C (mA) 100 kHz +85C 138 1643 1863 2111 1828 175 484 194 822 371 390 276 1129 597 1742 1559 1103 545 356 2012 1643 1103 1643 1103 2111 1724 1492 1157 1828 1492 1157 2111 1828 1492 1382 1219 1157 2151 1800 184 175 116 431 275 247 202 175 348 260 202 484 (mA) 100 kHz +85C (mA) 100 kHz +125C 61 730 828 938 812 78 215 86 365 165 173 123 502 265 774 693 490 242 158 894 730 490 730 490 938 766 663 514 812 663 514 938 812 663 614 542 514 956 800 82 78 52 192 122 110 90 78 155 116 90 215 (mA) 100 kHz +125C Maximum Allowable Ripple Current Moisture Sensitivity Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 5 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Cap Case Size VDC F KEMET/EIA 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 33 33 47 47 47 47 47 47 47 47 68 68 68 68 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 A/3216-18 T/3528-12 B/3528-21 B/3528-22 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 V/7343-20 B/3528-21 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 C/6032-28 C/6032-28 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 V/7343-20 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR (See below for part options) T495A336(1)006A(2)E600 T495T336(1)006A(2)E800 T495B476(1)006A(2)E250 T495B476(1)006A(2)E500 T495B476(1)006A(2)E450 T495B476(1)006A(2)E400 T495C476(1)006A(2)E250 T495C476(1)006A(2)E300 T495C476(1)006A(2)E330 T495V476(1)006A(2)E150 T495B686(1)006A(2)E500 T495D686(1)006A(2)E175 T495D686(1)006A(2)E180 T495D686(1)006A(2)4095 T495B107(1)006A(2)E400 T495B107(M)006A(2)E700 T495C107(1)006A(2)E075 T495C107(1)006A(2)E150 T495D107(1)006A(2)E050 T495D107(1)006A(2)E130 T495D107(1)006A(2)E150 T495D107(1)006A(2)E800 T495V107(1)006A(2)E090 T495V107(1)006A(2)E150 T495C157(1)006A(2)E050 T495C157(M)006A(2)E200 T495V157(1)006A(2)E040 T495V157(1)006A(2)E070 T495V157(1)006A(2)E150 T495D157(1)006A(2)E050 T495D157(1)006A(2)E065 T495D157(1)006A(2)E080 T495D157(1)006A(2)E100 T495D157(1)006A(2)E125 T495X157(1)006A(2)E100 T495X157(1)006A(2)4095 T495C227(1)006A(2)E225 T495D227(1)006A(2)E045 T495D227(1)006A(2)E050 T495D227(1)006A(2)E100 T495D227(1)006A(2)4095 T495X227(1)006A(2)E070 T495X227(1)006A(2)E080 T495X227(1)006A(2)E100 T495V227(1)006ATE150 T495X227(1)006A(2)4095 T495D337(1)006A(2)E040 T495D337(1)006A(2)E045 T495D337(1)006A(2)E050 T495D337(1)006A(2)E070 T495D337(1)006A(2)E100 (See below for part options) Amps +20C Max/5 Min 2.1 2.1 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 4.3 4.3 4.3 4.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 20.8 20.8 20.8 20.8 20.8 Amps +20C Max/5 Min % @ +20C 120 Hz Max 12.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 4.0 4.0 4.0 15.0 15.0 8.0 8.0 6.0 6.0 8.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 10.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 % @ +20C 120 Hz Max m @ 20C 100 kHz Max 600 800 250 500 450 400 250 300 330 150 500 175 180 175 400 700 75 150 50 130 150 800 90 150 50 200 40 70 150 50 65 80 100 125 100 125 225 45 50 100 100 70 80 100 150 100 40 45 50 70 100 m @ 20C 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (mA) 100 kHz +25C 354 296 583 583 435 461 663 606 577 913 412 926 913 926 461 348 1211 856 1732 1074 1000 433 1179 913 1483 742 1768 1336 913 1732 1519 1369 1225 1095 1285 1149 699 1826 1732 1225 1225 1535 1436 1285 913 1285 1936 1826 1732 1464 1225 (mA) 100 kHz +25C (mA) 100 kHz +85C 319 266 525 525 392 415 597 545 519 822 371 833 822 833 415 313 1090 770 1559 967 900 390 1061 822 1335 668 1591 1202 822 1559 1367 1232 1103 986 1157 1034 629 1643 1559 1103 1103 1382 1292 1157 822 1157 1742 1643 1559 1318 1103 (mA) 100 kHz +85C (mA) 100 kHz +125C 142 118 233 233 174 184 265 242 231 365 165 370 365 370 184 139 484 342 693 430 400 173 472 365 593 297 707 534 365 693 608 548 490 438 514 460 280 730 693 490 490 614 574 514 365 514 774 730 693 586 490 (mA) 100 kHz +125C Maximum Allowable Ripple Current Moisture Sensitivity Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 6 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Cap Case Size VDC F KEMET/EIA 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 470 470 470 470 680 680 680 1000 2.2 4.7 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 10 10 10 10 10 10 10 10 10 10 15 15 15 15 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 E/7360-38 X/7343-43 X/7343-43 X/7343-43 E/7360-38 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 B/3528-21 A/3216-18 B/3528-21 B/3528-21 B/3528-21 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 T/3528-12 A/3216-18 A/3216-18 B/3528-21 B/3528-21 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR (See below for part options) T495X337(1)006A(2)E045 T495X337(1)006A(2)E050 T495X337(1)006A(2)E065 T495X337(1)006A(2)E080 T495X337(1)006A(2)E100 T495E337(1)006A(2)E060 T495E337(1)006A(2)E100 T495D477(1)006A(2)E045 T495D477(1)006A(2)E100 T495D477(1)006A(2)E125 T495D477(1)006A(2)E150 T495X477(1)006A(2)E030 T495X477(1)006A(2)E045 T495X477(1)006A(2)E050 T495X477(1)006A(2)E060 T495X477(1)006A(2)E065 T495X477(1)006A(2)E100 T495X477(1)006A(2)E125 T495E477(1)006A(2)E040 T495E477(1)006A(2)E055 T495E477(1)006A(2)E100 T495X687(1)006A(2)E100 T495X687(1)006A(2)E060 T495X687(1)006A(2)E045 T495E108(1)006A(2)E050 T495A225(1)010A(2)E1K8 T495A475(1)010A(2)E1K2 T495A475(1)010A(2)E1K3 T495A475(1)010A(2)E1K4 T495A475(1)010A(2)E1K8 T495A475(1)010A(2)E2K0 T495B475(1)010A(2)E1K3 T495B475(1)010A(2)E1K5 T495A685(1)010A(2)E1K8 T495B685(1)010A(2)E900 T495B685(1)010A(2)E1K1 T495B685(1)010A(2)E1K2 T495A106(1)010A(2)E1K8 T495A106(1)010A(2) E2K0 T495A106(1)010A(2) E2K5 T495A106(1)010A(2) E3K8 T495B106(1)010A(2) E600 T495B106(1)010A(2)E750 T495B106(1)010A(2) E1K2 T495B106(1)010A(2)E3K0 T495C106(1)010AT E400 T495T106(1)010AT E1K5 T495A156(1)010AT E1K0 T495A156(1)010AT E1K8 T495B156(1)010AT E600 T495B156(1)010AT E900 (See below for part options) Amps +20C Max/5 Min 20.8 20.8 20.8 20.8 20.8 20.8 20.8 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 42.8 42.8 42.8 63.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.7 0.7 0.7 0.7 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.5 Amps +20C Max/5 Min % @ +20C 120 Hz Max 8.0 8.0 8.0 8.0 8.0 8.0 8.0 12.0 12.0 12.0 12.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 10.0 10.0 12.0 12.0 12.0 15.0 6.0 6.0 6.0 6.0 6.0 6.0 15.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max m @ 20C 100 kHz Max 45 50 65 80 100 60 100 45 100 125 150 30 45 50 60 65 100 125 40 55 100 100 60 45 50 1800 1200 1300 1400 1800 2000 1300 1500 1800 900 1100 1200 1800 2000 2500 3800 600 750 1200 3000 400 1500 1000 1800 600 900 m @ 20C 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (mA) 100 kHz +25C 1915 1817 1593 1436 1285 1826 1414 1826 1225 1095 1000 2345 1915 1817 1658 1593 1285 1149 2236 1907 1414 1285 1658 1915 2000 204 250 240 231 204 194 256 238 204 307 278 266 204 194 173 140 376 337 266 168 524 216 274 204 376 307 (mA) 100 kHz +25C (mA) 100 kHz +85C 1724 1635 1434 1292 1157 1643 1273 1643 1103 986 900 2111 1724 1635 1492 1434 1157 1034 2012 1716 1273 1157 1492 1724 1800 184 225 216 208 184 175 230 214 184 276 250 239 184 175 156 126 338 303 239 151 472 194 247 184 338 276 (mA) 100 kHz +85C (mA) 100 kHz +125C 766 727 637 574 514 730 566 730 490 438 400 938 766 727 663 637 514 460 894 763 566 514 663 766 800 82 100 96 92 82 78 102 95 82 123 111 106 82 78 69 56 150 135 106 67 210 86 110 82 150 123 (mA) 100 kHz +125C Maximum Allowable Ripple Current Moisture Sensitivity Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 7 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Cap Case Size VDC F KEMET/EIA 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 22 22 22 22 22 22 22 22 22 22 22 22 22 22 33 33 33 33 33 47 47 47 47 47 47 47 47 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 100 100 T/3528-12 B/3528-21 C/6032-28 C/6032-28 C/6032-28 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 B/3528-21 B/3528-21 B/3528-21 V/7343-20 V/7343-20 B/3528-21 B/3528-21 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 B/3528-21 B/3528-21 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR (See below for part options) T495T156(1)010AT E1K2 T495B156(1)010A(2)E500 T495C156(1)010A(2)E375 T495C156(1)010A(2)E400 T495C156(1)010A(2)E475 T495A226(1)010AT E1K2 T495A226(1)010AT E1K5 T495B226(1)010AT E400 T495B226(1)010AT E500 T495B226(1)010AT E700 T495B226(1)010AT E800 T495B226(1)010A(2)E2K3 T495C226(1)010A(2)E200 T495C226(1)010A(2)E245 T495C226(1)010A(2)E290 T495C226(1)010A(2)E300 T495C226(1)010A(2)E345 T495C226(1)010A(2)E350 T495C226(1)010A(2)E380 T495B336(1)010A(2)E450 T495B336(1)010A(2)E550 T495B336(1)010A(2)E650 T495V336(1)010A(2)E100 T495V336(1)010A(2)E150 T495B476(1)010A(2)E500 T495B476(1)010A(2)E650 T495C476(1)010A(2)E300 T495D476(1)010A(2)E080 T495D476(1)010A(2)E090 T495D476(1)010A(2)E100 T495D476(1)010A(2)E200 T495D476(1)010A(2)4095 T495B686(1)010A(2)E600 T495B686(1)010A(2)E750 T495B686(M)010A(2)E900 T495C686(1)010A(2)E080 T495C686(1)010A(2)E200 T495C686(1)010A(2)E225 T495C686(1)010A(2)E250 T495V686(1)010A(2)E070 T495V686(1)010A(2)E100 T495V686(1)010A(2)E140 T495V686(1)010A(2)E200 T495D686(1)010A(2)E070 T495D686(1)010A(2)E090 T495D686(1)010A(2)E100 T495D686(1)010A(2)E150 T495X686(1)010A(2)E150 T495X686(1)010A(2)4095 T495B107(M)010A(2)E350 T495B107(M)010A(2)E500 (See below for part options) Amps +20C Max/5 Min 1.5 1.5 1.5 1.5 1.5 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 3.3 3.3 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 10.0 10.0 Amps +20C Max/5 Min % @ +20C 120 Hz Max 6.0 6.0 6.0 6.0 6.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 6.0 6.0 4.0 4.0 8.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 12.0 30.0 % @ +20C 120 Hz Max m @ 20C 100 kHz Max 1200 500 375 400 475 1200 1500 400 500 700 800 2300 200 245 290 300 345 350 380 450 550 650 100 150 500 650 300 80 90 100 200 200 600 750 900 80 200 225 250 70 100 140 200 70 90 100 150 150 150 350 500 m @ 20C 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (mA) 100 kHz +25C 242 412 542 524 481 250 224 461 412 348 326 192 742 670 616 606 565 561 538 435 393 362 1118 913 412 362 606 1369 1291 1225 866 866 376 337 307 1173 742 699 663 1336 1118 945 791 1464 1291 1225 1000 1049 1049 493 412 (mA) 100 kHz +25C (mA) 100 kHz +85C 218 371 488 472 433 225 202 415 371 313 293 173 668 603 554 545 509 505 484 392 354 326 1006 822 371 326 545 1232 1162 1103 779 779 338 303 276 1056 668 629 597 1202 1006 851 712 1318 1162 1103 900 944 944 444 371 (mA) 100 kHz +85C (mA) 100 kHz +125C 97 165 217 210 192 100 90 184 165 139 130 77 297 268 246 242 226 224 215 174 157 145 447 365 165 145 242 548 516 490 346 346 150 135 123 469 297 280 265 534 447 378 316 586 516 490 400 420 420 197 165 (mA) 100 kHz +125C Maximum Allowable Ripple Current Moisture Sensitivity Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 8 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Cap Case Size VDC F KEMET/EIA 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 B/3528-21 C/6032-28 C/6032-28 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR (See below for part options) T495B107(M)010A(2)E700 T495C107(1)010A(2)E100 T495C107(1)010A(2)E150 T495V107(1)010A(2)E100 T495V107(1)010A(2)E150 T495V107(1)010A(2)E200 T495D107(1)010A(2)E050 T495D107(1)010A(2)E065 T495D107(1)010A(2)E080 T495D107(1)010A(2)E100 T495D107(1)010A(2)E120 T495D107(1)010A(2)E125 T495D107(1)010A(2)4095 T495X107(1)010A(2)E100 T495X107(1)010A(2)4095 T495V157(1)010A(2)E100 T495V157(1)010A(2)E150 T495V157(1)010A(2)E200 T495D157(1)010A(2)E050 T495D157(1)010A(2)E060 T495D157(1)010A(2)E080 T495D157(1)010A(2)E100 T495D157(1)010A(2)4095 T495X157(1)010A(2)E070 T495X157(1)010A(2)E080 T495X157(1)010A(2)E085 T495X157(1)010A(2)E100 T495X157(1)010A(2)4095 T495D227(1)010A(2)E045 T495D227(1)010A(2)E050 T495D227(1)010A(2)E075 T495D227(1)010A(2)E100 T495D227(1)010A(2)E125 T495X227(1)010A(2)E045 T495X227(1)010A(2)E050 T495X227(1)010A(2)E060 T495X227(1)010A(2)E070 T495X227(1)010A(2)E080 T495X227(1)010A(2)E100 T495X227(1)010A(2)4095 T495D337(1)010A(2)E100 T495D337(1)010A(2)E125 T495D337(1)010A(2)E150 T495X337(1)010A(2)E035 T495X337(1)010A(2)E040 T495X337(1)010A(2)E050 T495X337(1)010A(2)E060 T495X337(1)010A(2)E080 T495X337(1)010A(2)E100 T495E337(1)010A(2)E040 T495E337(1)010A(2)E060 (See below for part options) Amps +20C Max/5 Min 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 Amps +20C Max/5 Min % @ +20C 120 Hz Max 30.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 9.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 8.0 10.0 % @ +20C 120 Hz Max m @ 20C 100 kHz Max 700 100 150 100 150 200 50 65 80 100 120 125 100 100 100 100 150 200 50 60 80 100 100 70 80 85 100 100 45 50 75 100 125 45 50 60 70 80 100 100 100 125 150 35 40 50 60 80 100 40 60 m @ 20C 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (mA) 100 kHz +25C 348 1050 856 1118 913 791 1732 1519 1369 1225 1118 1095 1225 1285 1285 1118 913 791 1732 1581 1369 1225 1225 1535 1436 1393 1285 1285 1826 1732 1414 1225 1095 1915 1817 1658 1535 1436 1285 1285 1225 1095 1000 2171 2031 1817 1658 1436 1285 2236 1826 (mA) 100 kHz +25C (mA) 100 kHz +85C 313 945 812 1006 822 712 1559 1367 1232 1103 1006 986 1103 1157 1157 1006 822 712 1559 1423 1232 1103 1103 1382 1292 1254 1157 1157 1643 1559 1273 1103 986 1724 1635 1492 1382 1292 1157 1157 1103 986 900 1954 1828 1635 1492 1292 1157 2012 1643 (mA) 100 kHz +85C (mA) 100 kHz +125C 139 420 542 447 365 316 693 608 548 490 447 438 490 514 514 447 365 316 693 632 548 490 490 614 574 557 514 514 730 693 566 490 438 766 727 663 614 574 514 514 490 438 400 868 812 727 663 574 514 894 730 (mA) 100 kHz +125C Maximum Allowable Ripple Current Moisture Sensitivity Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 9 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Cap Case Size VDC F KEMET/EIA 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 330 470 470 470 470 470 470 470 470 470 2.2 3.3 4.7 4.7 4.7 6.8 10 10 10 10 15 15 15 22 22 22 33 33 33 33 33 33 33 33 33 33 33 33 47 47 47 47 47 47 47 47 68 68 68 68 68 E/7360-38 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 E/7360-38 A/3216-18 A/3216-18 A/3216-18 B/3528-21 B/3528-21 C/6032-28 B/3528-21 B/3528-21 B/3528-21 T/3528-12 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 B/3528-21 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 C/6032-28 V/7343-20 V/7343-20 V/7343-20 D/7343-31 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR (See below for part options) T495E337(1)010A(2)E100 T495X477(1)010A(2)E045 T495X477(1)010A(2)E050 T495X477(1)010A(2)E060 T495X477(1)010A(2)E080 T495X477(1)010A(2)E100 T495X477(1)010A(2)E200 T495E477(1)010A(2)E040 T495E477(1)010A(2)E060 T495E477(1)010A(2)E100 T495A225(1)016A(2)E2K5 T495A335(1)016A(2)E3K0 T495A475(1)016A(2)E2K0 T495B475(1)016A(2)E700 T495B475(1)016A(2)E800 T495C685(1)016A(2)E750 T495B106(1)016A(2)E650 T495B106(1)016A(2)E800 T495B106(1)016A(2)E2K5 T495T106(M)016A(2)E4K0 T495A156(1)016A(2)E2K5 T495B156(1)016A(2)E800 T495C156(1)016A(2)E400 T495B226(1)016A(2)E700 T495C226(1)016A(2)E350 T495C226(1)016A(2)E500 T495C336(1)016A(2)E200 T495C336(1)016A(2)E225 T495C336(1)016A(2)E230 T495C336(1)016A(2)E275 T495C336(1)016A(2)E300 T495B336(1)016A(2)E350 T495D336(1)016A(2)E150 T495D336(1)016A(2)E175 T495D336(1)016A(2)E200 T495D336(1)016A(2)E225 T495D336(1)016A(2)E250 T495D336(1)016A(2)4095 T495C476(1)016A(2)E300 T495C476(1)016A(2)E350 T495D476(1)016A(2)E080 T495D476(1)016A(2)E100 T495D476(1)016A(2)E150 T495D476(1)016A(2)E180 T495D476(1)016A(2)E800 T495D476(1)016A(2)4095 T495C686(1)016A(2)E250 T495V686(1)016A(2)E180 T495V686(1)016A(2)E250 T495V686(1)016A(2)E300 T495D686(1)016A(2)E070 (See below for part options) Amps +20C Max/5 Min 33.0 47.0 47.0 47.0 47.0 47.0 47.0 47.0 47.0 47.0 0.5 0.5 0.8 0.8 0.8 1.1 1.6 1.6 1.6 1.6 2.4 2.4 2.4 3.5 3.5 3.5 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 10.9 10.9 10.9 10.9 10.9 Amps +20C Max/5 Min % @ +20C 120 Hz Max 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 6.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max m @ 20C 100 kHz Max 100 45 50 60 80 100 200 40 60 100 2500 3000 2000 700 800 750 650 800 2500 4000 2500 800 400 700 350 500 200 225 230 275 300 350 150 175 200 225 250 250 300 350 80 100 150 180 800 200 250 180 250 300 70 m @ 20C 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (mA) 100 kHz +25C 1414 1915 1817 1658 1436 1285 908 2236 1826 1414 173 158 194 348 326 383 362 326 184 132 173 326 524 348 561 469 742 699 692 632 606 493 1000 926 866 816 775 775 606 561 1369 1225 1000 913 433 866 663 833 707 645 1464 (mA) 100 kHz +25C (mA) 100 kHz +85C 1273 1724 1635 1492 1292 1157 817 2012 1643 1273 156 142 175 313 293 345 326 293 166 119 156 293 472 313 505 422 668 629 623 569 545 444 900 833 779 734 698 698 545 505 1232 1103 900 822 390 779 597 750 636 581 1318 (mA) 100 kHz +85C (mA) 100 kHz +125C 566 766 727 663 574 514 363 894 730 566 69 63 78 139 130 153 145 130 74 53 69 130 210 139 224 188 297 280 277 253 242 197 400 370 346 326 310 310 242 224 548 490 400 365 173 346 265 333 283 258 586 (mA) 100 kHz +125C Maximum Allowable Ripple Current Moisture Sensitivity Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 10 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Cap Case Size VDC F KEMET/EIA 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 68 68 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 220 220 220 220 220 1 1 4.7 4.7 10 10 10 10 10 10 10 15 15 15 15 15 22 22 22 22 33 33 33 47 47 47 47 47 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 E/7360-38 E/7360-38 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR (See below for part options) T495D686(1)016A(2)E100 T495D686(1)016A(2)E150 T495D107(1)016A(2)E100 T495D107(1)016A(2)E125 T495D107(1)016A(2)E130 T495D107(1)016A(2)E150 T495D107(1)016A(2)E800 T495X107(1)016A(2)E080 T495X107(1)016A(2)E100 T495X107(1)016A(2)4095 T495D157(M)016A(2)E060 T495D157(M)016A(2)E085 T495D157(1)016A(2)E100 T495D157(1)016A(2)E125 T495D157(1)016A(2)E130 T495D157(1)016A(2)E150 T495X157(1)016A(2)E075 T495X157(1)016A(2)E100 T495X227(1)016A(2)E100 T495E227(1)016A(2)E050 T495E227(1)016A(2)E075 T495E227(1)016A(2)E100 T495E227(1)016A(2)E150 T495A105(1)020A(2)E3K0 T495A105(1)020A(2)E5K0 T495A475(1)020A(2)E1K8 T495A475(1)020A(2)E2K0 T495B106(1)020A(2)E1K0 T495B106(1)020A(2)E800 T495C106(1)020A(2)E300 T495C106(1)020A(2)E350 T495C106(1)020A(2)E400 T495C106(1)020A(2)E450 T495C106(1)020A(2)E475 T495C156(1)020A(2)E375 T495C156(1)020A(2)E400 T495D156(1)020A(2)E275 T495D156(1)020A(2)E1K2 T495D156(1)020A(2)4095 T495D226(1)020A(2)E180 T495D226(1)020A(2)E200 T495D226(1)020A(2)E225 T495D226(1)020A(2)4095 T495D336(1)020A(2)E100 T495D336(1)020A(2)E150 T495D336(1)020A(2)E200 T495D476(1)020A(2)E075 T495D476(1)020A(2)E100 T495D476(1)020A(2)E150 T495D476(1)020A(2)E175 T495D476(1)020A(2)E200 (See below for part options) Amps +20C Max/5 Min 10.9 10.9 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 35.2 35.2 35.2 35.2 35.2 0.5 0.5 0.9 0.9 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.0 3.0 3.0 3.0 3.0 4.4 4.4 4.4 4.4 6.6 6.6 6.6 9.4 9.4 9.4 9.4 9.4 Amps +20C Max/5 Min % @ +20C 120 Hz Max 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 12.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 12.0 8.0 7.2 7.2 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max m @ 20C 100 kHz Max 100 150 100 125 130 150 800 80 100 125 60 85 100 125 130 150 75 100 100 50 75 100 150 3000 5000 1800 2000 1000 800 300 350 400 450 475 375 400 275 1200 275 180 200 225 275 100 150 200 75 100 150 175 200 m @ 20C 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (mA) 100 kHz +25C 1225 1000 1225 1095 1074 1000 433 1436 1285 1149 1581 1328 1225 1095 1074 1000 1483 1285 1285 2000 1633 1414 1155 158 122 204 194 292 326 606 561 524 494 481 542 524 739 354 739 913 866 816 739 1225 1000 866 1414 1225 1000 926 866 (mA) 100 kHz +25C (mA) 100 kHz +85C 1103 900 1103 986 967 900 390 1292 1157 1034 1423 1195 1103 986 967 900 1335 1157 1157 1800 1470 1273 1040 142 110 184 175 263 293 545 505 472 445 433 488 472 665 319 665 822 779 734 665 1103 900 779 1273 1103 900 833 779 (mA) 100 kHz +85C (mA) 100 kHz +125C 490 400 490 438 430 400 173 574 514 460 632 531 490 438 430 400 593 514 514 800 653 566 462 63 49 82 78 117 130 242 224 210 198 192 217 210 296 142 296 365 346 326 296 490 400 346 566 490 400 370 346 (mA) 100 kHz +125C Maximum Allowable Ripple Current Moisture Sensitivity Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 11 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Cap Case Size VDC F KEMET/EIA 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 47 47 47 47 47 47 47 47 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 150 0.47 0.47 1 1 1 1 2.2 3.3 4.7 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 10 10 10 10 10 15 15 15 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 E/7360-38 E/7360-38 E/7360-38 E/7360-38 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 C/6032-28 C/6032-28 C/6032-28 C/6032-28 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR (See below for part options) T495D476(1)020A(2)E250 T495X476(1)020A(2)E065 T495X476(1)020A(2)E070 T495X476(1)020A(2)E100 T495X476(1)020A(2)E125 T495X476(1)020A(2)E130 T495X476(1)020A(2)E150 T495X476(1)020A(2)4095 T495D686(1)020A(2)E070 T495D686(1)020A(2)E150 T495D686(1)020A(2)E200 T495D686(1)020A(2)E300 T495X686(1)020A(2)E120 T495X686(1)020A(2)E130 T495X686(1)020A(2)E150 T495X686(1)020A(2)E200 T495X686(1)020A(2)4095 T495X107(1)020A(2)E100 T495X107(1)020A(2)E150 T495E107(1)020A(2)E060 T495E107(1)020A(2)E085 T495E107(1)020A(2)E100 T495E107(1)020A(2)E200 T495E157(1)020A(2)E080 T495A474(1)025A(2)E4K5 T495A474(1)025A(2)E7K0 T495A105(1)025A(2)E2K5 T495A105(1)025A(2)E3K0 T495A105(1)025A(2)E4K0 T495A105(1)025A(2)E5K0 T495C225(1)025A(2)E1K3 T495C335(1)025A(2)E750 T495C475(1)025A(2)E530 T495C475(1)025A(2)E575 T495B475(1)025A(2)E700 T495B475(1)025A(2)E750 T495B475(1)025A(2)E800 T495B475(1)025A(2)E900 T495B475(1)025A(2)E1K0 T495B685(1)025A(2)E1K5 T495C685(1)025A(2)E400 T495C685(1)025A(2)E490 T495C685(1)025A(2)E500 T495B106(1)025A(2)E750 T495C106(1)025A(2)E275 T495C106(1)025A(2)E300 T495C106(1)025A(2)E450 T495D106(1)025A(2)E1K2 T495D156(1)025A(2)E100 T495D156(1)025A(2)E230 T495D156(1)025A(2)E275 (See below for part options) Amps +20C Max/5 Min 9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.4 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 13.6 20.0 20.0 20.0 20.0 20.0 20.0 30.0 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.8 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.7 1.7 1.7 1.7 2.5 2.5 2.5 2.5 2.5 3.8 3.8 3.8 Amps +20C Max/5 Min % @ +20C 120 Hz Max 6.0 8.0 6.0 6.0 6.0 6.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 8.0 8.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 6.0 % @ +20C 120 Hz Max m @ 20C 100 kHz Max 250 65 70 100 125 130 150 150 70 150 200 300 120 130 150 200 150 100 150 60 85 100 200 80 4500 7000 2500 3000 4000 5000 1300 750 530 575 700 750 800 900 1000 1500 400 490 500 750 275 300 450 1200 100 230 275 m @ 20C 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (mA) 100 kHz +25C 775 1593 1535 1285 1149 1127 1049 1049 1464 1000 866 707 1173 1127 1049 908 1049 1285 1049 1826 1534 1414 1000 1581 129 104 173 158 137 122 291 383 456 437 348 337 326 307 292 238 524 474 469 337 632 606 494 354 1225 808 739 (mA) 100 kHz +25C (mA) 100 kHz +85C 698 1434 1382 1157 1034 1014 944 944 1318 900 779 636 1056 1014 944 817 944 1157 944 1643 1381 1273 900 1423 116 94 156 142 123 110 262 345 410 393 313 303 293 276 263 214 472 427 422 303 569 545 445 319 1103 727 665 (mA) 100 kHz +85C (mA) 100 kHz +125C 310 637 614 514 460 451 420 420 586 400 346 283 469 451 420 363 420 514 420 730 614 566 400 632 52 42 69 63 55 49 116 153 182 175 139 135 130 123 117 95 210 190 188 135 253 242 198 142 490 323 296 (mA) 100 kHz +125C Maximum Allowable Ripple Current Moisture Sensitivity Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 12 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Cap Case Size VDC F KEMET/EIA 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 15 15 15 22 22 22 22 22 22 22 22 33 33 33 33 33 33 33 33 33 33 33 47 47 47 47 47 47 47 47 47 47 47 68 68 68 68 68 68 100 100 0.33 0.47 0.47 0.47 0.47 1 1 1 1 1 D/7343-31 X/7343-43 X/7343-43 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR (See below for part options) T495D156(1)025A(2)4095 T495X156(1)025A(2)E200 T495X156(1)025A(2)4095 T495C226(1)025A(2)E275 T495C226(1)025A(2)E280 T495C226(1)025A(2)E300 T495C226(1)025A(2)E900 T495D226(1)025A(2)E200 T495D226(1)025A(2)E230 T495X226(1)025A(2)E225 T495X226(1)025A(2)4095 T495D336(1)025A(2)E090 T495D336(1)025A(2)E100 T495D336(1)025A(2)E150 T495D336(1)025A(2)E200 T495D336(1)025A(2)E225 T495D336(1)025A(2)E230 T495D336(1)025A(2)E300 T495X336(1)025A(2)E100 T495X336(1)025A(2)E175 T495X336(1)025A(2)E200 T495X336(1)025A(2)4095 T495X476(1)025A(2)E080 T495X476(1)025A(2)E100 T495X476(1)025A(2)E120 T495X476(1)025A(2)E150 T495X476(1)025A(2)E185 T495X476(1)025A(2)E200 T495D476(1)025A(2)E100 T495D476(1)025A(2)E120 T495D476(1)025A(2)E130 T495D476(1)025A(2)E150 T495D476(1)025A(2)E250 T495D686(1)025A(2)E150 T495D686(1)025A(2)E200 T495X686(1)025A(2)E125 T495X686(1)025A(2)E130 T495X686(1)025A(2)E150 T495X686(1)025A(2)E200 T495X107(1)025A(2)E150 T495E107(1)025A(2)E100 T495A334(1)035A(2)E6K0 T495B474(1)035A(2)E1K5 T495B474(1)035A(2)E2K2 T495B474(1)035A(2)E2K5 T495B474(1)035A(2)E11K T495A105(1)035A(2)E3K0 T495B105(1)035A(2)E1K5 T495B105(1)035A(2)E1K7 T495B105(1)035A(2)E2K0 T495B105(1)035A(2)E7K0 (See below for part options) Amps +20C Max/5 Min 3.8 3.8 3.8 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 11.8 17.0 17.0 17.0 17.0 17.0 17.0 25.0 25.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 Amps +20C Max/5 Min % @ +20C 120 Hz Max 6.0 4.0 4.0 6.0 6.0 8.0 6.0 6.0 6.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 10.0 10.0 6.0 6.0 6.0 6.0 10.0 8.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 % @ +20C 120 Hz Max m @ 20C 100 kHz Max 275 200 200 275 280 300 900 200 230 225 225 90 100 150 200 225 230 300 100 175 200 175 80 100 120 150 185 200 100 120 130 150 250 150 200 125 130 150 200 150 100 6000 1500 2200 2500 11000 3000 1500 1700 2000 7000 m @ 20C 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (mA) 100 kHz +25C 739 908 908 632 627 606 350 866 808 856 856 1291 1225 1000 866 816 808 707 1285 971 908 971 1436 1285 1173 1049 944 908 1225 1118 1074 1000 775 1000 866 1149 1127 1049 908 1049 1414 112 238 197 184 88 158 238 224 206 110 (mA) 100 kHz +25C (mA) 100 kHz +85C 665 817 817 569 564 545 315 779 727 770 770 1162 1103 900 779 734 727 636 1157 874 817 874 1292 1157 1056 944 850 817 1103 1006 967 900 698 900 779 1034 1014 944 817 944 1273 101 214 177 166 79 142 214 202 185 99 (mA) 100 kHz +85C (mA) 100 kHz +125C 296 363 363 253 251 242 140 346 323 342 342 516 490 400 346 326 323 283 514 388 363 388 574 514 469 420 378 363 490 447 430 400 310 400 346 460 451 420 363 420 566 45 95 79 74 35 63 95 90 82 44 (mA) 100 kHz +125C Maximum Allowable Ripple Current Moisture Sensitivity Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 13 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Cap Case Size VDC F KEMET/EIA 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 2.2 2.2 2.2 3.3 3.3 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 6.8 10 10 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 22 22 22 22 22 22 22 22 22 B/3528-21 B/3528-21 C/6032-28 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR (See below for part options) T495B225(1)035A(2)E1K5 T495B225(1)035A(2)E2K0 T495C225(1)035A(2)E750 T495B335(1)035A(2)E1K0 T495B335(1)035A(2)E900 T495C335(1)035A(2)E525 T495C335(1)035A(2)E550 T495C335(1)035A(2)E600 T495B475(1)035A(2)E1K0 T495C475(1)035A(2)E450 T495C475(1)035A(2)E500 T495C475(1)035A(2)E600 T495C475(1)035A(2)4095 T495D475(1)035A(2)E300 T495C685(1)035A(2)E1K8 T495D685(1)035A(2)E150 T495D685(1)035A(2)E300 T495D685(1)035A(2)E400 T495X685(1)035A(2)E300 T495X685(1)035A(2)4095 T495D106(1)035A(2)E120 T495D106(1)035A(2)E125 T495D106(1)035A(2)E130 T495D106(1)035A(2)E250 T495D106(1)035A(2)E260 T495D106(1)035A(2)E300 T495D106(1)035A(2)E1K0 T495D106(1)035A(2)4095 T495X106(1)035A(2)E175 T495X106(1)035A(2)E200 T495X106(1)035A(2)E250 T495X106(1)035A(2)E260 T495X106(1)035A(2)4095 T495C156(M)035A(2)E350 T495D156(1)035A(2)E225 T495D156(1)035A(2)E260 T495D156(1)035A(2)E300 T495X156(1)035A(2)E200 T495X156(1)035A(2)E225 T495X156(1)035A(2)E250 T495X156(1)035A(2)E260 T495X156(1)035A(2)4095 T495D226(1)035A(2)E125 T495D226(1)035A(2)E200 T495D226(1)035A(2)E250 T495D226(1)035A(2)E260 T495D226(1)035A(2)E300 T495X226(1)035A(2)E125 T495X226(1)035A(2)E130 T495X226(1)035A(2)E180 T495X226(1)035A(2)E200 (See below for part options) Amps +20C Max/5 Min 0.8 0.8 0.8 1.2 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 1.6 2.4 2.4 2.4 2.4 2.4 2.4 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 Amps +20C Max/5 Min % @ +20C 120 Hz Max 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 4.0 6.0 6.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max m @ 20C 100 kHz Max 1500 2000 750 1000 900 525 550 600 1000 450 500 600 600 300 1800 150 300 400 300 300 120 125 130 250 260 300 1000 300 175 200 250 260 250 350 225 260 300 200 225 250 260 225 125 200 250 260 300 125 130 180 200 m @ 20C 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (mA) 100 kHz +25C 238 206 383 292 307 458 447 428 292 494 469 428 428 707 247 1000 707 612 742 742 1118 1095 1074 775 760 707 387 707 971 908 812 797 812 561 816 760 707 908 856 812 797 856 1095 866 775 760 707 1149 1127 957 908 (mA) 100 kHz +25C (mA) 100 kHz +85C 214 185 345 263 276 412 402 385 263 445 422 385 385 636 222 900 636 551 668 668 1006 986 967 698 684 636 348 636 874 817 731 717 731 505 734 684 636 817 770 731 717 770 986 779 698 684 636 1034 1014 861 817 (mA) 100 kHz +85C (mA) 100 kHz +125C 95 82 153 117 123 183 179 171 117 198 188 171 171 283 99 400 283 245 297 297 447 438 430 310 304 283 155 283 388 363 325 319 325 224 326 304 283 363 342 325 319 342 438 346 310 304 283 460 451 383 363 (mA) 100 kHz +125C Maximum Allowable Ripple Current Moisture Sensitivity Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 14 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Table 1 - Ratings & Part Number Reference cont'd Rated Rated Case Code/ Voltage Cap Case Size VDC F KEMET/EIA 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 22 22 22 22 33 33 33 33 33 33 33 47 47 47 47 1 1 2.2 3.3 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 10 10 10 15 15 15 X/7343-43 X/7343-43 X/7343-43 X/7343-43 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 E/7360-38 X/7343-43 X/7343-43 X/7343-43 X/7343-43 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 VDC F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR (See below for part options) T495X226(1)035A(2)E260 T495X226(1)035A(2)E275 T495X226(1)035A(2)E300 T495X226(1)035A(2)4095 T495D336(1)035A(2)E200 T495D336(1)035A(2)E300 T495X336(1)035A(2)E100 T495X336(1)035A(2)E175 T495X336(1)035A(2)E250 T495X336(1)035A(2)E260 T495E336(1)035A(2)E200 T495X476(1)035A(2)E185 T495X476(1)035A(2)E200 T495X476(1)035A(2)E230 T495X476(1)035A(2)E300 T495C105(1)050A(2)E1K3 T495C105(1)050A(2)E1K6 T495D225(1)050A(2)E600 T495D335(1)050A(2)E700 T495D475(1)050A(2)E275 T495D475(1)050A(2)E300 T495X475(1)050A(2)E300 T495X475(1)050A(2)4095 T495D685(1)050A(2)E190 T495D685(1)050A(2)E200 T495D685(1)050A(2)E275 T495D685(1)050A(2)E300 T495D685(1)050A(2)E400 T495X106(1)050A(2)E250 T495X106(1)050A(2)E260 T495X106(1)050A(2)E300 T495X156(1)050A(2)E200 T495X156(1)050A(2)E250 T495X156(1)050A(2)E300 (See below for part options) Amps +20C Max/5 Min 7.7 7.7 7.7 7.7 11.6 11.6 11.6 11.6 11.6 11.6 11.6 16.5 16.5 16.5 16.5 0.5 0.5 1.1 1.7 2.4 2.4 2.4 2.4 3.4 3.4 3.4 3.4 3.4 5.0 5.0 5.0 7.5 7.5 7.5 Amps +20C Max/5 Min % @ +20C 120 Hz Max 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 4.0 4.0 6.0 6.0 6.0 6.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 8.0 6.0 6.0 6.0 6.0 6.0 % @ +20C 120 Hz Max m @ 20C 100 kHz Max 260 275 300 300 200 300 100 175 250 260 200 185 200 230 300 1300 1600 600 700 275 300 300 300 190 200 275 300 400 250 260 300 200 250 300 m @ 20C 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current (mA) 100 kHz +25C 797 775 742 742 866 707 1285 971 812 797 1000 944 908 847 742 291 262 500 463 739 707 742 742 889 866 739 707 612 812 797 742 908 812 742 (mA) 100 kHz +25C (mA) 100 kHz +85C 717 698 668 668 779 636 1157 874 731 717 900 850 817 762 668 262 236 450 417 665 636 668 668 800 779 665 636 551 731 717 668 817 731 668 (mA) 100 kHz +85C (mA) 100 kHz +125C 319 310 297 297 346 283 514 388 325 319 400 378 363 339 297 116 105 200 185 296 283 297 297 356 346 296 283 245 325 319 297 363 325 297 (mA) 100 kHz +125C Maximum Allowable Ripple Current Moisture Sensitivity Reflow Temp 260C 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Reflow Temp 260C Moisture Sensitivity (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 15 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Recommended Voltage Derating Guidelines 85C to 125C 120% VR 67% of VR 100% 50% of VR 33% of VR % Working Voltage % Change in Working DC Voltage with Temperature Recommended Maximum Application Voltage -55C to 85C 80% 60% 40% 20% 0% % Change in Working DC Voltage with Temperature 67% Recommended Maximum Application Voltage (As % of Rated Voltage) -55 25 33% 85 Temperature (C) 125 Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Power Dissipation T 25C 1.00 T 85C 0.90 T 125C 0.40 KEMET Case Code EIA Case Code A B C D X E S T U V T510X T510E 3216-18 3528-21 6032-28 7343-31 7343-43 7360-38 3216-12 3528-12 6032-15 7343-20 7343-43 7360-38 Maximum Power Dissipation (P max) mWatts @ 25C w/+20C Rise 75 85 110 150 165 200 60 70 90 125 270 285 The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. T= Environmental Temperature Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = P max/R E(max) = Z P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 16 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25C 85C 125C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage Table 2 - Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case A B C D L M H E1 Q R2 S2 T U V W EIA 3216-18 3528-21 6032-25 7343-31 6032-19 3528-15 7360-20 7360-38 7343-12 2012-12 3216-12 3528-12 6032-15 7343-20 7343-15 W 1.35 2.35 2.35 2.55 2.35 2.35 4.25 4.25 2.55 1.05 1.35 2.35 2.35 2.55 2.55 L 2.20 2.21 2.77 2.77 2.77 2.20 2.77 2.77 2.77 1.83 2.20 2.20 2.77 2.77 2.77 S 0.62 0.92 2.37 3.67 2.37 0.92 3.67 3.67 3.67 0.15 0.62 0.92 2.37 3.67 3.67 V1 6.02 6.32 8.92 10.22 8.92 6.32 10.22 10.22 10.22 4.82 6.02 6.32 8.92 10.22 10.22 V2 2.80 4.00 4.50 5.60 4.50 4.00 7.30 7.30 5.60 2.50 2.80 4.00 4.50 5.60 5.60 W 1.23 2.23 2.23 2.43 2.23 2.23 4.13 4.13 2.43 0.93 1.23 2.23 2.23 2.43 2.43 L 1.80 1.80 2.37 2.37 2.37 1.80 2.37 2.37 2.37 1.50 1.80 1.80 2.37 2.37 2.37 S 0.82 1.12 2.57 3.87 2.57 1.12 3.87 3.87 3.87 0.22 0.82 1.12 2.57 3.87 3.87 V1 4.92 5.22 7.82 9.12 7.82 5.22 9.12 9.12 9.12 3.72 4.92 5.22 7.82 9.12 9.12 V2 2.30 3.50 4.00 5.10 4.00 3.50 6.80 6.80 5.10 2.00 2.30 3.50 4.00 5.10 5.10 W 1.13 2.13 2.13 2.33 2.13 2.13 4.03 4.03 2.33 0.83 1.13 2.13 2.13 2.33 2.33 L 1.42 1.42 1.99 1.99 1.99 1.42 1.99 1.99 1.99 1.12 1.42 1.42 1.99 1.99 1.99 S 0.98 1.28 2.73 4.03 2.73 1.28 4.03 4.03 4.03 0.38 0.98 1.28 2.73 4.03 4.03 V1 4.06 4.36 6.96 8.26 6.96 4.36 8.26 8.26 8.26 2.86 4.06 4.36 6.96 8.26 8.26 V2 2.04 3.24 3.74 4.84 3.74 3.24 6.54 6.54 4.84 1.74 2.04 3.24 3.74 4.84 4.84 X1 Y1 7343-43 7343-40 2.55 2.55 2.77 2.77 3.67 3.67 10.22 10.22 5.60 5.60 2.43 2.43 2.37 2.37 3.87 3.87 9.12 9.12 5.10 5.10 2.33 2.33 1.99 1.99 4.03 4.03 8.26 8.26 4.84 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 17 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Soldering Process Please note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100C 150C Temperature Maximum (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60 - 120 seconds 60 - 120 seconds 3C/seconds maximum Ramp-up Rate (TL to TP) 3C/seconds maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60 - 150 seconds 220C* 235C** 60 - 150 seconds 250C* 260C** Peak Temperature (TP) Time within 5C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) 20 seconds maximum 30 seconds maximum 6C/seconds maximum 6C/seconds maximum Time 25C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z TP TL Temperature KEMET's families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp Up Rate = 3C/seconds Maximum Ramp Down Rate = 6C/seconds tL Tsmax Tsmin 25 tS 25C to Peak Time Construction MnO2 /Ta2O5/Ta Silver Adhesive Silver Paint Washer Leadframe (-Cathode) Leadframe (+Anode) Carbon Tantalum Wire Weld (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 18 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Capacitor Marking R+ Rated Voltage 156 25 K 230 Polarity Indicator (+) KEMET Industrial Grade MnO2 Polarity Indicator (+) 156 K 25V KEMET Surge Robust MnO2 C, D, X Case Sizes Picofarad Code KEMET ID Date Code* Rated Voltage C6 Date Code* KEMET ID Picofarad Code 49 Internal Code * 230 = 30th week of 2012 Date Code* Date Code * 1 digit = Last number of Year st 2nd and 3rd digit = Week of the Year 9 = 2009 0 = 2010 1 = 2011 2 = 2012 3 = 2013 4 = 2014 01 = 1st week of the Year to 52 = 52nd week of the Year Year Month X = 2009 1 = Jan 7 = Jul A = 2010 2 = Feb 8 = Aug B = 2011 3 = Mar 9 = Spt C = 2012 4 = Apr O = Oct D = 2013 5 = May N = Nov E = 2014 6 = Jun D = Dec Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature- reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 19 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Tape & Reel Packaging Information KEMET's molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481-1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. 8 mm (0.315") or 12 mm (0.472") Top Tape Thickness 0.10 mm (0.004") Maximum Thickness 180 mm (7.0") or 330 mm (13.0") Table 3 - Packaging Quantity Case Code KEMET I S T M U L W Z V A B C D Y X E/T428P H EIA 3216-10 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-40 7343-43 7360-38 7360-20 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 12 3,000 2,500 2,500 2,000 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 1,000 12,000 10,000 10,000 8,000 5,000 5,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 2,500 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 20 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ODo Po [10 pitches cumulative tolerance on tape 0.2 mm] E1 Ao F Ko B1 S1 W E2 Bo P1 T1 Center Lines of Cavity OD 1 Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Embossment For cavity size, see Note 1 Table 4 User Direction of Unreeling Table 4 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 8 mm 12 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 16 mm Tape Size Pitch 8 mm Single (4 mm) 12 mm Single (4 mm) & Double (8 mm) 16 mm Triple (12 mm) D1 Minimum Note 1 1.0 (0.039) 1.5 (0.059) B1 Maximum Note 4 4.35 (0.171) 8.2 (0.323) 12.1 (0.476) E1 P0 P2 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) R Reference Note 2 25.0 (0.984) 30 (1.181) S1 Minimum T Maximum T1 Maximum Note 3 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) E2 Minimum F P1 T2 Maximum W Maximum A0, B0 & K0 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) 3.5 0.05 (0.138 0.002) 5.5 0.05 (0.217 0.002) 5.5 0.05 (0.217 0.002) 4.0 0.10 (0.157 0.004) 8.0 0.10 (0.315 0.004) 8.0 0.10 (0.315 0.004) 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 5). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481-D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3). (e) see Addendum in EIA Standard 481-D for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 21 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8,12 16 - 200 Bo Maximum Rotation ( 20 10 T) Typical Component Centerline Ao Figure 3 - Maximum Lateral Movement 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum 16 mm Tape s Tape Maximum Width (mm) Rotation ( 8,12 20 16 - 56 10 72 - 200 5 S) Figure 4 - Bending Radius Embossed Carrier Punched Carrier 1.0 mm maximum 1.0 mm maximum R Bending Radius (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com R T2009_T495 * 2/3/2014 22 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Figure 5 - Reel Dimensions Full Radius, See Note W3 (Includes Access Hole at Slot Location (O 40 mm minimum) flange distortion at outer edge) W2 (Measured at hub) D A (See Note) N C (Arbor hole diameter) B (see Note) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm Variable Dimensions -- Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) Shall accommodate tape width without interference 8 mm 12 mm 16 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 23 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Figure 6 - Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only END Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm Minimum Components 100 mm Minimum Leader 400 mm Minimum Top Cover Tape Figure 7 - Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm Maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 24 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-460122 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Espoo, Finland Tel: 358-9-5406-5000 Northeast Wilmington, MA Tel: 978-658-1663 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Central Novi, MI Tel: 248-306-9353 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 25 Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors - T495 Surge Robust Low ESR MnO2 Series Other KEMET Resources Tools Resource Location Configure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Electrolytic LifeCalculator http://www.kemet.com:8080/elc Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Contact Resource Location Website Contact Us Investor Relations www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2009_T495 * 2/3/2014 26