© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 1
One world. One KEMET
Benets
Meets or exceeds EIA Standard 535BAAC
Taped and reeled per EIA 481–1
High surge current capability
Optional gold-plated terminations
High ripple current capability
100% surge current test on C, D, E, U, V, X sizes
100% steady-state accelerated aging
• Capacitancevaluesof0.1μFto1,000μF
Tolerances of ±10% and ±20%
Voltage rating of 2.5 – 50 VDC
Extended range values
Available tested to DSCC 95158
RoHS Compliant and lead-free terminations
• Operatingtemperaturerangeof-55˚Cto+12C
Applications
Typicalapplicationsincludedecouplingandlteringinindustrial
and automotive end applications, such as DC/DC converters,
portable electronics, telecommunications, and control units
requiring high ripple current capability.
Overview
The low ESR, surge-robust T495 Series is designed for
demanding applications that require high surge current and
high ripple current capability. This series builds upon the proven
capabilities of our industrial grade tantalum chip capacitors
to offer several advantages such as low ESR, high ripple
current capability, excellent capacitance stability, and improved
resistancetohighin-rushcurrents.Thesebenetsareachieved
though a combination of proprietary design, materials, and process
parameters as well as high-stress, low impedance electrical
conditioningperformedpriortoscreening.Thisseriesisclassied
as MSL (Mositure Sensitivity Level) 1 under J STD 020: unlimited
oorlifetimeat≤30°C/85%RH.
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors
T495 Surge Robust Low ESR MnO2 Series
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder
SPICE
Foradetailedanalysisofspecicpartnumbers,pleasevisitwww.kemet.comforafreedownloadofKEMET'sSPICEsoftware.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 22
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Ordering Information
T495 X107 M010 A T E045
Capacitor
Class Series Case Size Capacitance
Code(pF)
Capacitance
Tolerance Voltage FailureRate/
Design Lead Material ESR Packaging
(C-Spec)
T =
Tantalum
Surge
Robust
Low ESR
A, B, C,
D, E, T,
V, X
Firsttwodigits
representsignicant
gures.Thirddigit
speciesnumberof
zeros.
K = ±10%
M = ±20%
2R5 = 2.5 V
004 = 4 V
006 = 6.3 V
010 = 10 V
016 = 16 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
A = N/A
T = 100% Matte Tin
(Sn) Plated
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
G = Gold Plated (A,
B, C, D, X only)
Last three
digits specify
ESR in mΩ. (45
= 45 mΩ)
Blank = 7" Reel
7280 = 13" Reel
Performance Characteristics
Item
Performance Characteristics
Operating Temperature -55°Cto125°C
Rated Capacitance Range 0.47–1,000µF@120Hz/25°C
Capacitance Tolerance K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range 2.5 – 50 V
DF(120Hz) RefertoPartNumberElectricalSpecicationTable
ESR (100 kHz) RefertoPartNumberElectricalSpecicationTable
Leakage Current ≤0.01CV(µA)atratedvoltageafter5minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 33
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Qualication
Test Condition Characteristics
Endurance 85°C@ratedvoltage,2,000hours.
125°C@2/3ratedvoltage,2,000hours.
ΔC/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Storage Life 125°C@0volts,2,000hours.
ΔC/C
Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Thermal Shock MILSTD–202,Method107,ConditionB,mounted,-55C°to
125°C,1,000cycles.
ΔC/C Within ±5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Temperature Stability
Extreme temperature exposure at a
successionofcontinuousstepsat+25ºC,
-55ºC,+25ºC,+8C,+125ºC,+25ºC.
+2C -55°C +85°C +125°C
ΔC/C I L* ±10% ±10% ±20%
DF IL IL 1.5 x IL 1.5 x IL
DCL IL n/a 10 x IL 12 x IL
Surge Voltage 25°Cand85°C,1.32xratedvoltage1,000cycles
(125°C,1.2xratedvoltage).
ΔC/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G peak
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
ΔC/C
Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial limit
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 44
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Electrical Characteristics
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (μF)
Frequency (Hz)
T495C476M016ATE350
T495D157M016ATE085
T495X227M016ATE100
Capacitancevs.Frequency
0.01
0.1
1
10
100
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T495C476M016ATE350_IMP
T495D157M016ATE085_IMP
T495X227M016ATE100_IMP
T495C476M016ATE350_ESR
T495D157M016ATE085_ESR
T495X227M016ATE100_ESR
ESRvs.Frequency
Dimensions – Millimeters (Inches)
Metric will govern
Termination
cutout at
KEMET’s
option,
either end
Case Size
Component
KEMET EIA L* W* H* F*±0.1
±(.004)
S* ±0.3
±(.012)
B* ±0.15
(Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
A3216–18
3.2 ± 0.2
(.126 ± .008)
1.6 ± 0.2
(.063 ± .008)
1.6 ± 0.2
(.063 ± .008) 1.2 (.047) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004) 0.4 (.016) 0.4 (.016) 0.13 (.005) 0.8 (.31) 1.1 (.043) 1.3 (.051)
B352821
3.5 ± 0.2
(.138 ± .008)
2.8 ± 0.2
(.110 ± .008)
1.9 ± 0.2
(.075 ± .008) 2.2 (.087) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 1.1 (0.043) 1.8 (.071) 2.2 (.087)
C6032–28
6.0 ± 0.3
(.236 ± .03)
3.2 ± 0.3
(.126 ± .012)
2.5 ± 0.3
(.098 ± .012) 2.2 (.087) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 2.5(.098) 2.8 (.110) 2.4 (.094)
D734331
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
2.8 ± 0.3
(.110 ± .012) 2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X7343–43
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
4.0 ± 0.3
(.157 ± .012) 2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) 1.7 (.067) 1.0 (.039) 0.13 (.0 05) 3.8 (.150) 3.5 (.138) 3.5 (.138)
E7360–38
7.3 ± 0.3
(.287 ± .012)
6.0± 0.3
(.236 ± .012)
3.6 ± 0.2
(.142 ± .008) 4.1 (.161) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004) 0.9 (.035) 1.0 (.039) 0.13 (.0 05) 3.8 (.150) 3.5 (.138) 3.5 (.138)
T3528–12
3.5 ± 0.2
(.138 ± .008)
2.8 ± 0.2
(.110 ± .008) 1.2 (.047) 2.2 (.087) 0.8 (.031) N/A 0.05 (.002) N/A N/A 0.13 (.005) 1.1 (.043) 1.8 (.071) 2.2 (.087)
V7343–20
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
2.0 (.079) 2.4 (.094) 1.3 (.051) N/A 0.05 (.002) N/A N/A 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low prole cases do not have a bevel or a notch.
* MILPRF55365/8 specied dimensions
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 55
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
2.5 100 T/3528-12 T495T107(M)2R5A(2)E3K0 2.5 24.0 3000 153 138 61 1
2.5 220 D/7343-31 T495D227(1)2R5A(2)E045 5.5 8.0 45 1826 1643 730 1
2.5 470 D/7343-31 T495D477(1)2R5A(2)E035 11.8 8.0 35 2070 1863 828 1
2.5 1000 X/7343-43 T495X108(1)2R5A(2)E030 25.0 15.0 30 2345 2111 938 1
2.5 1000 X/7343-43 T495X108(1)2R5A(2)E040 25.0 15.0 40 2031 1828 812 1
46.8 A/3216-18 T495A685(1)004A(2)E2K0 0.5 6.0 2000 194 175 78 1
422 C/6032-28 T495C226(1)004A(2)E380 0.9 6.0 380 538 484 215 1
468 T/3528-12 T495T686(1)004A(2)E1K5 2.7 20.0 1500 216 194 86 1
468 V/7343-20 T495V686(1)004A(2)E150 2.7 6.0 150 913 822 365 1
4100 B/3528-21 T495B107(1)004A(2)E500 4.0 8.0 500 412 371 165 1
4100 D/7343-31 T495D107(1)004A(2)E800 4.0 6.0 800 433 390 173 1
4150 B/3528-21 T495B157(M)004A(2)E900 6.0 12.0 900 307 276 123 1
4150 C/6032-28 T495C157(1)004A(2)E070 6.0 12.0 70 1254 1129 502 1
4150 C/6032-28 T495C157(1)004A(2)E250 6.0 8.0 250 663 597 265 1
4220 D/7343-31 T495D227(1)004A(2)E040 8.8 8.0 40 1936 1742 774 1
4220 D/7343-31 T495D227(1)004A(2)E050 8.8 8.0 50 1732 1559 693 1
4220 D/7343-31 T495D227(1)004A(2)E100 8.8 8.0 100 1225 1103 490 1
4330 C/6032-28 T495C337(1)004A(2)E300 13.2 10.0 300 606 545 242 1
4330 C/6032-28 T495C337(1)004A(2)E700 13.2 12.0 700 396 356 158 1
4330 D/7343-31 T495D337(1)004A(2)E030 13.2 8.0 30 2236 2012 894 1
4330 D/7343-31 T495D337(1)004A(2)E045 13.2 8.0 45 1826 1643 730 1
4330 D/7343-31 T495D337(1)004A(2)E100 13.2 8.0 100 1225 1103 490 1
4470 D/7343-31 T495D477(1)004A(2)E045 18.8 12.0 45 1826 1643 730 1
4470 D/7343-31 T495D477(1)004A(2)E100 18.8 12.0 100 1225 1103 490 1
4470 X/7343-43 T495X477(1)004A(2)E030 18.8 8.0 30 2345 2111 938 1
4470 X/7343-43 T495X477(1)004A(2)E045 18.8 8.0 45 1915 1724 766 1
4470 X/7343-43 T495X477(1)004A(2)E060 18.8 10.0 60 1658 1492 663 1
4470 X/7343-43 T495X477(1)004A(2)E100 18.8 8.0 100 1285 1157 514 1
4680 X/7343-43 T495X687(1)004A(2)E040 27.2 10.0 40 2031 1828 812 1
4680 X/7343-43 T495X687(1)004A(2)E060 27.2 10.0 60 1658 1492 663 1
4680 X/7343-43 T495X687(1)004A(2)E100 27.2 10.0 100 1285 1157 514 1
41000 X/7343-43 T495X108(1)004A(2)E030 40.0 10.0 30 2345 2111 938 1
41000 X/7343-43 T495X108(1)004A(2)E040 40.0 10.0 40 2031 1828 812 1
41000 X/7343-43 T495X108(1)004A(2)E060 40.0 10.0 60 1658 1492 663 1
41000 X/7343-43 T495X108(1)004A(2)E070 40.0 10.0 70 1535 1382 614 1
41000 X/7343-43 T495X108(1)004A(2)E090 40.0 10.0 90 1354 1219 542 1
41000 X/7343-43 T495X108(1)004A(2)E100 40.0 10.0 100 1285 1157 514 1
41000 E/7360-38 T495E108(1)004A(2)E035 40.0 15.0 35 2390 2151 956 1
41000 E/7360-38 T495E108(1)004A(2)E050 40.0 15.0 50 2000 1800 800 1
6.3 6.8 A/3216-18 T495A685(1)006ATE1K8 0.5 6.0 1800 204 184 82 1
6.3 6.8 A/3216-18 T495A685(1)006ATE2K0 0.5 6.0 2000 194 175 78 1
6.3 6.8 A/3216-18 T495A685(1)006A(2)E4K5 0.5 6.0 4500 129 116 52 1
6.3 6.8 C/6032-28 T495C685(1)006A(2)E480 0.5 6.0 480 479 431 192 1
6.3 10 A/3216-18 T495A106(1)006A(2)E800 0.6 6.0 800 306 275 122 1
6.3 10 A/3216-18 T495A106(1)006A(2)E1K0 0.6 6.0 1000 274 247 110 1
6.3 10 A/3216-18 T495A106(1)006A(2)E1K5 0.6 6.0 1500 224 202 90 1
6.3 10 A/3216-18 T495A106(1)006A(2)E2K0 0.6 6.0 2000 194 175 78 1
6.3 22 A/3216-18 T495A226(1)006A(2)E500 1.4 6.0 500 387 348 155 1
6.3 22 A/3216-18 T495A226(1)006A(2)E900 1.4 8.0 900 289 260 116 1
6.3 22 A/3216-18 T495A226(1)006A(2)E1K5 1.4 8.0 1500 224 202 90 1
6.3 22 C/6032-28 T495C226(1)006A(2)E380 1.4 6.0 380 538 484 215 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 66
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
6.3 33 A/3216-18 T495A336(1)006A(2)E600 2.1 12.0 600 354 319 142 1
6.3 33 T/3528-12 T495T336(1)006A(2)E800 2.1 6.0 800 296 266 118 1
6.3 47 B/3528-21 T495B476(1)006A(2)E250 3.0 6.0 250 583 525 233 1
6.3 47 B/3528-22 T495B476(1)006A(2)E500 3.0 6.0 500 583 525 233 1
6.3 47 B/3528-21 T495B476(1)006A(2)E450 3.0 6.0 450 435 392 174 1
6.3 47 B/3528-21 T495B476(1)006A(2)E400 3.0 6.0 400 461 415 184 1
6.3 47 C/6032-28 T495C476(1)006A(2)E250 3.0 6.0 250 663 597 265 1
6.3 47 C/6032-28 T495C476(1)006A(2)E300 3.0 6.0 300 606 545 242 1
6.3 47 C/6032-28 T495C476(1)006A(2)E330 3.0 6.0 330 577 519 231 1
6.3 47 V/7343-20 T495V476(1)006A(2)E150 3.0 6.0 150 913 822 365 1
6.3 68 B/3528-21 T495B686(1)006A(2)E500 4.3 8.0 500 412 371 165 1
6.3 68 D/7343-31 T495D686(1)006A(2)E175 4.3 4.0 175 926 833 370 1
6.3 68 D/7343-31 T495D686(1)006A(2)E180 4.3 4.0 180 913 822 365 1
6.3 68 D/7343-31 T495D686(1)006A(2)4095 4.3 4.0 175 926 833 370 1
6.3 100 B/3528-21 T495B107(1)006A(2)E400 6.3 15.0 400 461 415 184 1
6.3 100 B/3528-21 T495B107(M)006A(2)E700 6.3 15.0 700 348 313 139 1
6.3 100 C/6032-28 T495C107(1)006A(2)E075 6.3 8.0 75 1211 1090 484 1
6.3 100 C/6032-28 T495C107(1)006A(2)E150 6.3 8.0 150 856 770 342 1
6.3 100 D/7343-31 T495D107(1)006A(2)E050 6.3 6.0 50 1732 1559 693 1
6.3 100 D/7343-31 T495D107(1)006A(2)E130 6.3 6.0 130 1074 967 430 1
6.3 100 D/7343-31 T495D107(1)006A(2)E150 6.3 8.0 150 1000 900 400 1
6.3 100 D/7343-31 T495D107(1)006A(2)E800 6.3 6.0 800 433 390 173 1
6.3 100 V/7343-20 T495V107(1)006A(2)E090 6.3 8.0 90 1179 1061 472 1
6.3 100 V/7343-20 T495V107(1)006A(2)E150 6.3 8.0 150 913 822 365 1
6.3 150 C/6032-28 T495C157(1)006A(2)E050 9.5 8.0 50 1483 1335 593 1
6.3 150 C/6032-28 T495C157(M)006A(2)E200 9.5 8.0 200 742 668 297 1
6.3 150 V/7343-20 T495V157(1)006A(2)E040 9.5 8.0 40 1768 1591 707 1
6.3 150 V/7343-20 T495V157(1)006A(2)E070 9.5 8.0 70 1336 1202 534 1
6.3 150 V/7343-20 T495V157(1)006A(2)E150 9.5 8.0 150 913 822 365 1
6.3 150 D/7343-31 T495D157(1)006A(2)E050 9.5 6.0 50 1732 1559 693 1
6.3 150 D/7343-31 T495D157(1)006A(2)E065 9.5 6.0 65 1519 1367 608 1
6.3 150 D/7343-31 T495D157(1)006A(2)E080 9.5 6.0 80 1369 1232 548 1
6.3 150 D/7343-31 T495D157(1)006A(2)E100 9.5 6.0 100 1225 1103 490 1
6.3 150 D/7343-31 T495D157(1)006A(2)E125 9.5 6.0 125 1095 986 438 1
6.3 150 X/7343-43 T495X157(1)006A(2)E100 9.5 6.0 100 1285 1157 514 1
6.3 150 X/7343-43 T495X157(1)006A(2)4095 9.5 6.0 125 1149 1034 460 1
6.3 220 C/6032-28 T495C227(1)006A(2)E225 13.9 10.0 225 699 629 280 1
6.3 220 D/7343-31 T495D227(1)006A(2)E045 13.9 8.0 45 1826 1643 730 1
6.3 220 D/7343-31 T495D227(1)006A(2)E050 13.9 8.0 50 1732 1559 693 1
6.3 220 D/7343-31 T495D227(1)006A(2)E100 13.9 8.0 100 1225 1103 490 1
6.3 220 D/7343-31 T495D227(1)006A(2)4095 13.9 8.0 100 1225 1103 490 1
6.3 220 X/7343-43 T495X227(1)006A(2)E070 13.9 8.0 70 1535 1382 614 1
6.3 220 X/7343-43 T495X227(1)006A(2)E080 13.9 8.0 80 1436 1292 574 1
6.3 220 X/7343-43 T495X227(1)006A(2)E100 13.9 8.0 100 1285 1157 514 1
6.3 220 V/7343-20 T495V227(1)006ATE150 13.9 8.0 150 913 822 365 1
6.3 220 X/7343-43 T495X227(1)006A(2)4095 13.9 8.0 100 1285 1157 514 1
6.3 330 D/7343-31 T495D337(1)006A(2)E040 20.8 8.0 40 1936 1742 774 1
6.3 330 D/7343-31 T495D337(1)006A(2)E045 20.8 8.0 45 1826 1643 730 1
6.3 330 D/7343-31 T495D337(1)006A(2)E050 20.8 8.0 50 1732 1559 693 1
6.3 330 D/7343-31 T495D337(1)006A(2)E070 20.8 8.0 70 1464 1318 586 1
6.3 330 D/7343-31 T495D337(1)006A(2)E100 20.8 8.0 100 1225 1103 490 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 77
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
6.3 330 X/7343-43 T495X337(1)006A(2)E045 20.8 8.0 45 1915 1724 766 1
6.3 330 X/7343-43 T495X337(1)006A(2)E050 20.8 8.0 50 1817 1635 727 1
6.3 330 X/7343-43 T495X337(1)006A(2)E065 20.8 8.0 65 1593 1434 637 1
6.3 330 X/7343-43 T495X337(1)006A(2)E080 20.8 8.0 80 1436 1292 574 1
6.3 330 X/7343-43 T495X337(1)006A(2)E100 20.8 8.0 100 1285 1157 514 1
6.3 330 E/7360-38 T495E337(1)006A(2)E060 20.8 8.0 60 1826 1643 730 1
6.3 330 E/7360-38 T495E337(1)006A(2)E100 20.8 8.0 100 1414 1273 566 1
6.3 470 D/7343-31 T495D477(1)006A(2)E045 29.6 12.0 45 1826 1643 730 1
6.3 470 D/7343-31 T495D477(1)006A(2)E100 29.6 12.0 100 1225 1103 490 1
6.3 470 D/7343-31 T495D477(1)006A(2)E125 29.6 12.0 125 1095 986 438 1
6.3 470 D/7343-31 T495D477(1)006A(2)E150 29.6 12.0 150 1000 900 400 1
6.3 470 X/7343-43 T495X477(1)006A(2)E030 29.6 10.0 30 2345 2111 938 1
6.3 470 X/7343-43 T495X477(1)006A(2)E045 29.6 10.0 45 1915 1724 766 1
6.3 470 X/7343-43 T495X477(1)006A(2)E050 29.6 10.0 50 1817 1635 727 1
6.3 470 X/7343-43 T495X477(1)006A(2)E060 29.6 10.0 60 1658 1492 663 1
6.3 470 X/7343-43 T495X477(1)006A(2)E065 29.6 10.0 65 1593 1434 637 1
6.3 470 X/7343-43 T495X477(1)006A(2)E100 29.6 10.0 100 1285 1157 514 1
6.3 470 X/7343-43 T495X477(1)006A(2)E125 29.6 10.0 125 1149 1034 460 1
6.3 470 E/7360-38 T495E477(1)006A(2)E040 29.6 12.0 40 2236 2012 894 1
6.3 470 E/7360-38 T495E477(1)006A(2)E055 29.6 10.0 55 1907 1716 763 1
6.3 470 E/7360-38 T495E477(1)006A(2)E100 29.6 10.0 100 1414 1273 566 1
6.3 680 X/7343-43 T495X687(1)006A(2)E100 42.8 12.0 100 1285 1157 514 1
6.3 680 X/7343-43 T495X687(1)006A(2)E060 42.8 12.0 60 1658 1492 663 1
6.3 680 X/7343-43 T495X687(1)006A(2)E045 42.8 12.0 45 1915 1724 766 1
6.3 1000 E/7360-38 T495E108(1)006A(2)E050 63.0 15.0 50 2000 1800 800 1
10 2.2 A/3216-18 T495A225(1)010A(2)E1K8 0.5 6.0 1800 204 184 82 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K2 0.5 6.0 1200 250 225 100 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K3 0.5 6.0 1300 240 216 96 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K4 0.5 6.0 1400 231 208 92 1
10 4.7 A/3216-18 T495A475(1)010A(2)E1K8 0.5 6.0 1800 204 184 82 1
10 4.7 A/3216-18 T495A475(1)010A(2)E2K0 0.5 6.0 2000 194 175 78 1
10 4.7 B/3528-21 T495B475(1)010A(2)E1K3 0.5 15.0 1300 256 230 102 1
10 4.7 B/3528-21 T495B475(1)010A(2)E1K5 0.5 6.0 1500 238 214 95 1
10 6.8 A/3216-18 T495A685(1)010A(2)E1K8 0.7 6.0 1800 204 184 82 1
10 6.8 B/3528-21 T495B685(1)010A(2)E900 0.7 6.0 900 307 276 123 1
10 6.8 B/3528-21 T495B685(1)010A(2)E1K1 0.7 6.0 1100 278 250 111 1
10 6.8 B/3528-21 T495B685(1)010A(2)E1K2 0.7 6.0 1200 266 239 106 1
10 10 A/3216-18 T495A106(1)010A(2)E1K8 1.0 6.0 1800 204 184 82 1
10 10 A/3216-18 T495A106(1)010A(2) E2K0 1.0 6.0 2000 194 175 78 1
10 10 A/3216-18 T495A106(1)010A(2) E2K5 1.0 6.0 2500 173 156 69 1
10 10 A/3216-18 T495A106(1)010A(2) E3K8 1.0 6.0 3800 140 126 56 1
10 10 B/3528-21 T495B106(1)010A(2) E600 1.0 6.0 600 376 338 150 1
10 10 B/3528-21 T495B106(1)010A(2)E750 1.0 6.0 750 337 303 135 1
10 10 B/3528-21 T495B106(1)010A(2) E1K2 1.0 6.0 1200 266 239 106 1
10 10 B/3528-21 T495B106(1)010A(2)E3K0 1.0 6.0 3000 168 151 67 1
10 10 C/6032-28 T495C106(1)010AT E400 1.0 6.0 400 524 472 210 1
10 10 T/3528-12 T495T106(1)010AT E1K5 1.0 6.0 1500 216 194 86 1
10 15 A/3216-18 T495A156(1)010AT E1K0 1.5 6.0 1000 274 247 110 1
10 15 A/3216-18 T495A156(1)010AT E1K8 1.5 6.0 1800 204 184 82 1
10 15 B/3528-21 T495B156(1)010AT E600 1.5 6.0 600 376 338 150 1
10 15 B/3528-21 T495B156(1)010AT E900 1.5 6.0 900 307 276 123 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 88
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
10 15 T/3528-12 T495T156(1)010AT E1K2 1.5 6.0 1200 242 218 97 1
10 15 B/3528-21 T495B156(1)010A(2)E500 1.5 6.0 500 412 371 165 1
10 15 C/6032-28 T495C156(1)010A(2)E375 1.5 6.0 375 542 488 217 1
10 15 C/6032-28 T495C156(1)010A(2)E400 1.5 6.0 400 524 472 210 1
10 15 C/6032-28 T495C156(1)010A(2)E475 1.5 6.0 475 481 433 192 1
10 22 A/3216-18 T495A226(1)010AT E1K2 2.2 8.0 1200 250 225 100 1
10 22 A/3216-18 T495A226(1)010AT E1K5 2.2 8.0 1500 224 202 90 1
10 22 B/3528-21 T495B226(1)010AT E400 2.2 6.0 400 461 415 184 1
10 22 B/3528-21 T495B226(1)010AT E500 2.2 6.0 500 412 371 165 1
10 22 B/3528-21 T495B226(1)010AT E700 2.2 6.0 700 348 313 139 1
10 22 B/3528-21 T495B226(1)010AT E800 2.2 6.0 800 326 293 130 1
10 22 B/3528-21 T495B226(1)010A(2)E2K3 2.2 6.0 2300 192 173 77 1
10 22 C/6032-28 T495C226(1)010A(2)E200 2.2 6.0 200 742 668 297 1
10 22 C/6032-28 T495C226(1)010A(2)E245 2.2 6.0 245 670 603 268 1
10 22 C/6032-28 T495C226(1)010A(2)E290 2.2 6.0 290 616 554 246 1
10 22 C/6032-28 T495C226(1)010A(2)E300 2.2 6.0 300 606 545 242 1
10 22 C/6032-28 T495C226(1)010A(2)E345 2.2 6.0 345 565 509 226 1
10 22 C/6032-28 T495C226(1)010A(2)E350 2.2 6.0 350 561 505 224 1
10 22 C/6032-28 T495C226(1)010A(2)E380 2.2 6.0 380 538 484 215 1
10 33 B/3528-21 T495B336(1)010A(2)E450 3.3 6.0 450 435 392 174 1
10 33 B/3528-21 T495B336(1)010A(2)E550 3.3 6.0 550 393 354 157 1
10 33 B/3528-21 T495B336(1)010A(2)E650 3.3 6.0 650 362 326 145 1
10 33 V/7343-20 T495V336(1)010A(2)E100 3.3 6.0 100 1118 1006 447 1
10 33 V/7343-20 T495V336(1)010A(2)E150 3.3 6.0 150 913 822 365 1
10 47 B/3528-21 T495B476(1)010A(2)E500 4.7 6.0 500 412 371 165 1
10 47 B/3528-21 T495B476(1)010A(2)E650 4.7 6.0 650 362 326 145 1
10 47 C/6032-28 T495C476(1)010A(2)E300 4.7 6.0 300 606 545 242 1
10 47 D/7343-31 T495D476(1)010A(2)E080 4.7 4.0 80 1369 1232 548 1
10 47 D/7343-31 T495D476(1)010A(2)E090 4.7 6.0 90 1291 1162 516 1
10 47 D/7343-31 T495D476(1)010A(2)E100 4.7 6.0 100 1225 1103 490 1
10 47 D/7343-31 T495D476(1)010A(2)E200 4.7 4.0 200 866 779 346 1
10 47 D/7343-31 T495D476(1)010A(2)4095 4.7 4.0 200 866 779 346 1
10 68 B/3528-21 T495B686(1)010A(2)E600 6.8 8.0 600 376 338 150 1
10 68 B/3528-21 T495B686(1)010A(2)E750 6.8 8.0 750 337 303 135 1
10 68 B/3528-21 T495B686(M)010A(2)E900 6.8 8.0 900 307 276 123 1
10 68 C/6032-28 T495C686(1)010A(2)E080 6.8 6.0 80 1173 1056 469 1
10 68 C/6032-28 T495C686(1)010A(2)E200 6.8 6.0 200 742 668 297 1
10 68 C/6032-28 T495C686(1)010A(2)E225 6.8 6.0 225 699 629 280 1
10 68 C/6032-28 T495C686(1)010A(2)E250 6.8 6.0 250 663 597 265 1
10 68 V/7343-20 T495V686(1)010A(2)E070 6.8 6.0 70 1336 1202 534 1
10 68 V/7343-20 T495V686(1)010A(2)E100 6.8 6.0 100 1118 1006 447 1
10 68 V/7343-20 T495V686(1)010A(2)E140 6.8 6.0 140 945 851 378 1
10 68 V/7343-20 T495V686(1)010A(2)E200 6.8 6.0 200 791 712 316 1
10 68 D/7343-31 T495D686(1)010A(2)E070 6.8 6.0 70 1464 1318 586 1
10 68 D/7343-31 T495D686(1)010A(2)E090 6.8 6.0 90 1291 1162 516 1
10 68 D/7343-31 T495D686(1)010A(2)E100 6.8 6.0 100 1225 1103 490 1
10 68 D/7343-31 T495D686(1)010A(2)E150 6.8 6.0 150 1000 900 400 1
10 68 X/7343-43 T495X686(1)010A(2)E150 6.8 4.0 150 1049 944 420 1
10 68 X/7343-43 T495X686(1)010A(2)4095 6.8 4.0 150 1049 944 420 1
10 100 B/3528-21 T495B107(M)010A(2)E350 10.0 12.0 350 493 444 197 1
10 100 B/3528-21 T495B107(M)010A(2)E500 10.0 30.0 500 412 371 165 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 99
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
10 100 B/3528-21 T495B107(M)010A(2)E700 10.0 30.0 700 348 313 139 1
10 100 C/6032-28 T495C107(1)010A(2)E100 10.0 8.0 100 1050 945 420 1
10 100 C/6032-28 T495C107(1)010A(2)E150 10.0 8.0 150 856 812 542 1
10 100 V/7343-20 T495V107(1)010A(2)E100 10.0 8.0 100 1118 1006 447 1
10 100 V/7343-20 T495V107(1)010A(2)E150 10.0 8.0 150 913 822 365 1
10 100 V/7343-20 T495V107(1)010A(2)E200 10.0 8.0 200 791 712 316 1
10 100 D/7343-31 T495D107(1)010A(2)E050 10.0 8.0 50 1732 1559 693 1
10 100 D/7343-31 T495D107(1)010A(2)E065 10.0 8.0 65 1519 1367 608 1
10 100 D/7343-31 T495D107(1)010A(2)E080 10.0 8.0 80 1369 1232 548 1
10 100 D/7343-31 T495D107(1)010A(2)E100 10.0 8.0 100 1225 1103 490 1
10 100 D/7343-31 T495D107(1)010A(2)E120 10.0 8.0 120 1118 1006 447 1
10 100 D/7343-31 T495D107(1)010A(2)E125 10.0 8.0 125 1095 986 438 1
10 100 D/7343-31 T495D107(1)010A(2)4095 10.0 8.0 100 1225 1103 490 1
10 100 X/7343-43 T495X107(1)010A(2)E100 10.0 6.0 100 1285 1157 514 1
10 100 X/7343-43 T495X107(1)010A(2)4095 10.0 6.0 100 1285 1157 514 1
10 150 V/7343-20 T495V157(1)010A(2)E100 15.0 8.0 100 1118 1006 447 1
10 150 V/7343-20 T495V157(1)010A(2)E150 15.0 8.0 150 913 822 365 1
10 150 V/7343-20 T495V157(1)010A(2)E200 15.0 8.0 200 791 712 316 1
10 150 D/7343-31 T495D157(1)010A(2)E050 15.0 8.0 50 1732 1559 693 1
10 150 D/7343-31 T495D157(1)010A(2)E060 15.0 8.0 60 1581 1423 632 1
10 150 D/7343-31 T495D157(1)010A(2)E080 15.0 8.0 80 1369 1232 548 1
10 150 D/7343-31 T495D157(1)010A(2)E100 15.0 8.0 100 1225 1103 490 1
10 150 D/7343-31 T495D157(1)010A(2)4095 15.0 8.0 100 1225 1103 490 1
10 150 X/7343-43 T495X157(1)010A(2)E070 15.0 8.0 70 1535 1382 614 1
10 150 X/7343-43 T495X157(1)010A(2)E080 15.0 8.0 80 1436 1292 574 1
10 150 X/7343-43 T495X157(1)010A(2)E085 15.0 8.0 85 1393 1254 557 1
10 150 X/7343-43 T495X157(1)010A(2)E100 15.0 8.0 100 1285 1157 514 1
10 150 X/7343-43 T495X157(1)010A(2)4095 15.0 8.0 100 1285 1157 514 1
10 220 D/7343-31 T495D227(1)010A(2)E045 22.0 8.0 45 1826 1643 730 1
10 220 D/7343-31 T495D227(1)010A(2)E050 22.0 9.0 50 1732 1559 693 1
10 220 D/7343-31 T495D227(1)010A(2)E075 22.0 8.0 75 1414 1273 566 1
10 220 D/7343-31 T495D227(1)010A(2)E100 22.0 8.0 100 1225 1103 490 1
10 220 D/7343-31 T495D227(1)010A(2)E125 22.0 8.0 125 1095 986 438 1
10 220 X/7343-43 T495X227(1)010A(2)E045 22.0 8.0 45 1915 1724 766 1
10 220 X/7343-43 T495X227(1)010A(2)E050 22.0 8.0 50 1817 1635 727 1
10 220 X/7343-43 T495X227(1)010A(2)E060 22.0 8.0 60 1658 1492 663 1
10 220 X/7343-43 T495X227(1)010A(2)E070 22.0 8.0 70 1535 1382 614 1
10 220 X/7343-43 T495X227(1)010A(2)E080 22.0 8.0 80 1436 1292 574 1
10 220 X/7343-43 T495X227(1)010A(2)E100 22.0 8.0 100 1285 1157 514 1
10 220 X/7343-43 T495X227(1)010A(2)4095 22.0 8.0 100 1285 1157 514 1
10 330 D/7343-31 T495D337(1)010A(2)E100 33.0 8.0 100 1225 1103 490 1
10 330 D/7343-31 T495D337(1)010A(2)E125 33.0 10.0 125 1095 986 438 1
10 330 D/7343-31 T495D337(1)010A(2)E150 33.0 10.0 150 1000 900 400 1
10 330 X/7343-43 T495X337(1)010A(2)E035 33.0 10.0 35 2171 1954 868 1
10 330 X/7343-43 T495X337(1)010A(2)E040 33.0 10.0 40 2031 1828 812 1
10 330 X/7343-43 T495X337(1)010A(2)E050 33.0 10.0 50 1817 1635 727 1
10 330 X/7343-43 T495X337(1)010A(2)E060 33.0 10.0 60 1658 1492 663 1
10 330 X/7343-43 T495X337(1)010A(2)E080 33.0 10.0 80 1436 1292 574 1
10 330 X/7343-43 T495X337(1)010A(2)E100 33.0 10.0 100 1285 1157 514 1
10 330 E/7360-38 T495E337(1)010A(2)E040 33.0 8.0 40 2236 2012 894 1
10 330 E/7360-38 T495E337(1)010A(2)E060 33.0 10.0 60 1826 1643 730 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 1010
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
10 330 E/7360-38 T495E337(1)010A(2)E100 33.0 10.0 100 1414 1273 566 1
10 470 X/7343-43 T495X477(1)010A(2)E045 47.0 10.0 45 1915 1724 766 1
10 470 X/7343-43 T495X477(1)010A(2)E050 47.0 10.0 50 1817 1635 727 1
10 470 X/7343-43 T495X477(1)010A(2)E060 47.0 10.0 60 1658 1492 663 1
10 470 X/7343-43 T495X477(1)010A(2)E080 47.0 10.0 80 1436 1292 574 1
10 470 X/7343-43 T495X477(1)010A(2)E100 47.0 10.0 100 1285 1157 514 1
10 470 X/7343-43 T495X477(1)010A(2)E200 47.0 10.0 200 908 817 363 1
10 470 E/7360-38 T495E477(1)010A(2)E040 47.0 10.0 40 2236 2012 894 1
10 470 E/7360-38 T495E477(1)010A(2)E060 47.0 10.0 60 1826 1643 730 1
10 470 E/7360-38 T495E477(1)010A(2)E100 47.0 10.0 100 1414 1273 566 1
16 2.2 A/3216-18 T495A225(1)016A(2)E2K5 0.5 6.0 2500 173 156 69 1
16 3.3 A/3216-18 T495A335(1)016A(2)E3K0 0.5 6.0 3000 158 142 63 1
16 4.7 A/3216-18 T495A475(1)016A(2)E2K0 0.8 6.0 2000 194 175 78 1
16 4.7 B/3528-21 T495B475(1)016A(2)E700 0.8 6.0 700 348 313 139 1
16 4.7 B/3528-21 T495B475(1)016A(2)E800 0.8 6.0 800 326 293 130 1
16 6.8 C/6032-28 T495C685(1)016A(2)E750 1.1 6.0 750 383 345 153 1
16 10 B/3528-21 T495B106(1)016A(2)E650 1.6 6.0 650 362 326 145 1
16 10 B/3528-21 T495B106(1)016A(2)E800 1.6 6.0 800 326 293 130 1
16 10 B/3528-21 T495B106(1)016A(2)E2K5 1.6 6.0 2500 184 166 74 1
16 10 T/3528-12 T495T106(M)016A(2)E4K0 1.6 8.0 4000 132 119 53 1
16 15 A/3216-18 T495A156(1)016A(2)E2K5 2.4 8.0 2500 173 156 69 1
16 15 B/3528-21 T495B156(1)016A(2)E800 2.4 6.0 800 326 293 130 1
16 15 C/6032-28 T495C156(1)016A(2)E400 2.4 6.0 400 524 472 210 1
16 22 B/3528-21 T495B226(1)016A(2)E700 3.5 6.0 700 348 313 139 1
16 22 C/6032-28 T495C226(1)016A(2)E350 3.5 6.0 350 561 505 224 1
16 22 C/6032-28 T495C226(1)016A(2)E500 3.5 6.0 500 469 422 188 1
16 33 C/6032-28 T495C336(1)016A(2)E200 5.3 6.0 200 742 668 297 1
16 33 C/6032-28 T495C336(1)016A(2)E225 5.3 6.0 225 699 629 280 1
16 33 C/6032-28 T495C336(1)016A(2)E230 5.3 6.0 230 692 623 277 1
16 33 C/6032-28 T495C336(1)016A(2)E275 5.3 6.0 275 632 569 253 1
16 33 C/6032-28 T495C336(1)016A(2)E300 5.3 6.0 300 606 545 242 1
16 33 B/3528-21 T495B336(1)016A(2)E350 5.3 6.0 350 493 444 197 1
16 33 D/7343-31 T495D336(1)016A(2)E150 5.3 6.0 150 1000 900 400 1
16 33 D/7343-31 T495D336(1)016A(2)E175 5.3 6.0 175 926 833 370 1
16 33 D/7343-31 T495D336(1)016A(2)E200 5.3 6.0 200 866 779 346 1
16 33 D/7343-31 T495D336(1)016A(2)E225 5.3 4.0 225 816 734 326 1
16 33 D/7343-31 T495D336(1)016A(2)E250 5.3 6.0 250 775 698 310 1
16 33 D/7343-31 T495D336(1)016A(2)4095 5.3 4.0 250 775 698 310 1
16 47 C/6032-28 T495C476(1)016A(2)E300 7. 5 6.0 300 606 545 242 1
16 47 C/6032-28 T495C476(1)016A(2)E350 7.5 6.0 350 561 505 224 1
16 47 D/7343-31 T495D476(1)016A(2)E080 7. 5 6.0 80 1369 1232 548 1
16 47 D/7343-31 T495D476(1)016A(2)E100 7.5 6.0 100 1225 1103 490 1
16 47 D/7343-31 T495D476(1)016A(2)E150 7.5 6.0 150 1000 900 400 1
16 47 D/7343-31 T495D476(1)016A(2)E180 7.5 6.0 180 913 822 365 1
16 47 D/7343-31 T495D476(1)016A(2)E800 7.5 6.0 800 433 390 173 1
16 47 D/7343-31 T495D476(1)016A(2)4095 7.5 6.0 200 866 779 346 1
16 68 C/6032-28 T495C686(1)016A(2)E250 10.9 6.0 250 663 597 265 1
16 68 V/7343-20 T495V686(1)016A(2)E180 10.9 6.0 180 833 750 333 1
16 68 V/7343-20 T495V686(1)016A(2)E250 10.9 6.0 250 707 636 283 1
16 68 V/7343-20 T495V686(1)016A(2)E300 10.9 6.0 300 645 581 258 1
16 68 D/7343-31 T495D686(1)016A(2)E070 10.9 6.0 70 1464 1318 586 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 1111
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
16 68 D/7343-31 T495D686(1)016A(2)E100 10.9 6.0 100 1225 1103 490 1
16 68 D/7343-31 T495D686(1)016A(2)E150 10.9 6.0 150 1000 900 400 1
16 100 D/7343-31 T495D107(1)016A(2)E100 16.0 8.0 100 1225 1103 490 1
16 100 D/7343-31 T495D107(1)016A(2)E125 16.0 8.0 125 1095 986 438 1
16 100 D/7343-31 T495D107(1)016A(2)E130 16.0 8.0 130 1074 967 430 1
16 100 D/7343-31 T495D107(1)016A(2)E150 16.0 8.0 150 1000 900 400 1
16 100 D/7343-31 T495D107(1)016A(2)E800 16.0 8.0 800 433 390 173 1
16 100 X/7343-43 T495X107(1)016A(2)E080 16.0 8.0 80 1436 1292 574 1
16 100 X/7343-43 T495X107(1)016A(2)E100 16.0 8.0 100 1285 1157 514 1
16 100 X/7343-43 T495X107(1)016A(2)4095 16.0 8.0 125 1149 1034 460 1
16 150 D/7343-31 T495D157(M)016A(2)E060 24.0 12.0 60 1581 1423 632 1
16 150 D/7343-31 T495D157(M)016A(2)E085 24.0 8.0 85 1328 1195 531 1
16 150 D/7343-31 T495D157(1)016A(2)E100 24.0 8.0 100 1225 1103 490 1
16 150 D/7343-31 T495D157(1)016A(2)E125 24.0 8.0 125 1095 986 438 1
16 150 D/7343-31 T495D157(1)016A(2)E130 24.0 8.0 130 1074 967 430 1
16 150 D/7343-31 T495D157(1)016A(2)E150 24.0 8.0 150 1000 900 400 1
16 150 X/7343-43 T495X157(1)016A(2)E075 24.0 8.0 75 1483 1335 593 1
16 150 X/7343-43 T495X157(1)016A(2)E100 24.0 8.0 100 1285 1157 514 1
16 220 X/7343-43 T495X227(1)016A(2)E100 35.2 8.0 100 1285 1157 514 1
16 220 E/7360-38 T495E227(1)016A(2)E050 35.2 12.0 50 2000 1800 800 1
16 220 E/7360-38 T495E227(1)016A(2)E075 35.2 8.0 75 1633 1470 653 1
16 220 E/7360-38 T495E227(1)016A(2)E100 35.2 7.2 100 1414 1273 566 1
16 220 E/7360-38 T495E227(1)016A(2)E150 35.2 7. 2 150 1155 1040 462 1
20 1A/3216-18 T495A105(1)020A(2)E3K0 0.5 4.0 3000 158 142 63 1
20 1A/3216-18 T495A105(1)020A(2)E5K0 0.5 4.0 5000 122 110 49 1
20 4.7 A/3216-18 T495A475(1)020A(2)E1K8 0.9 6.0 1800 204 184 82 1
20 4.7 A/3216-18 T495A475(1)020A(2)E2K0 0.9 6.0 2000 194 175 78 1
20 10 B/3528-21 T495B106(1)020A(2)E1K0 2.0 6.0 1000 292 263 117 1
20 10 B/3528-21 T495B106(1)020A(2)E800 2.0 6.0 800 326 293 130 1
20 10 C/6032-28 T495C106(1)020A(2)E300 2.0 6.0 300 606 545 242 1
20 10 C/6032-28 T495C106(1)020A(2)E350 2.0 6.0 350 561 505 224 1
20 10 C/6032-28 T495C106(1)020A(2)E400 2.0 6.0 400 524 472 210 1
20 10 C/6032-28 T495C106(1)020A(2)E450 2.0 6.0 450 494 445 198 1
20 10 C/6032-28 T495C106(1)020A(2)E475 2.0 6.0 475 481 433 192 1
20 15 C/6032-28 T495C156(1)020A(2)E375 3.0 6.0 375 542 488 217 1
20 15 C/6032-28 T495C156(1)020A(2)E400 3.0 6.0 400 524 472 210 1
20 15 D/7343-31 T495D156(1)020A(2)E275 3.0 4.0 275 739 665 296 1
20 15 D/7343-31 T495D156(1)020A(2)E1K2 3.0 4.0 1200 354 319 142 1
20 15 D/7343-31 T495D156(1)020A(2)4095 3.0 4.0 275 739 665 296 1
20 22 D/7343-31 T495D226(1)020A(2)E180 4.4 4.0 180 913 822 365 1
20 22 D/7343-31 T495D226(1)020A(2)E200 4.4 4.0 200 866 779 346 1
20 22 D/7343-31 T495D226(1)020A(2)E225 4.4 4.0 225 816 734 326 1
20 22 D/7343-31 T495D226(1)020A(2)4095 4.4 4.0 275 739 665 296 1
20 33 D/7343-31 T495D336(1)020A(2)E100 6.6 6.0 100 1225 1103 490 1
20 33 D/7343-31 T495D336(1)020A(2)E150 6.6 6.0 150 1000 900 400 1
20 33 D/7343-31 T495D336(1)020A(2)E200 6.6 6.0 200 866 779 346 1
20 47 D/7343-31 T495D476(1)020A(2)E075 9.4 6.0 75 1414 1273 566 1
20 47 D/7343-31 T495D476(1)020A(2)E100 9.4 6.0 100 1225 1103 490 1
20 47 D/7343-31 T495D476(1)020A(2)E150 9.4 6.0 150 1000 900 400 1
20 47 D/7343-31 T495D476(1)020A(2)E175 9.4 6.0 175 926 833 370 1
20 47 D/7343-31 T495D476(1)020A(2)E200 9.4 6.0 200 866 779 346 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 1212
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
20 47 D/7343-31 T495D476(1)020A(2)E250 9.4 6.0 250 775 698 310 1
20 47 X/7343-43 T495X476(1)020A(2)E065 9.4 8.0 65 1593 1434 637 1
20 47 X/7343-43 T495X476(1)020A(2)E070 9.4 6.0 70 1535 1382 614 1
20 47 X/7343-43 T495X476(1)020A(2)E100 9.4 6.0 100 1285 1157 514 1
20 47 X/7343-43 T495X476(1)020A(2)E125 9.4 6.0 125 1149 1034 460 1
20 47 X/7343-43 T495X476(1)020A(2)E130 9.4 6.0 130 1127 1014 451 1
20 47 X/7343-43 T495X476(1)020A(2)E150 9.4 4.0 150 1049 944 420 1
20 47 X/7343-43 T495X476(1)020A(2)4095 9.4 4.0 150 1049 944 420 1
20 68 D/7343-31 T495D686(1)020A(2)E070 13.6 6.0 70 1464 1318 586 1
20 68 D/7343-31 T495D686(1)020A(2)E150 13.6 6.0 150 1000 900 400 1
20 68 D/7343-31 T495D686(1)020A(2)E200 13.6 6.0 200 866 779 346 1
20 68 D/7343-31 T495D686(1)020A(2)E300 13.6 6.0 300 707 636 283 1
20 68 X/7343-43 T495X686(1)020A(2)E120 13.6 6.0 120 1173 1056 469 1
20 68 X/7343-43 T495X686(1)020A(2)E130 13.6 6.0 130 1127 1014 451 1
20 68 X/7343-43 T495X686(1)020A(2)E150 13.6 6.0 150 1049 944 420 1
20 68 X/7343-43 T495X686(1)020A(2)E200 13.6 6.0 200 908 817 363 1
20 68 X/7343-43 T495X686(1)020A(2)4095 13.6 6.0 150 1049 944 420 1
20 100 X/7343-43 T495X107(1)020A(2)E100 20.0 6.0 100 1285 1157 514 1
20 100 X/7343-43 T495X107(1)020A(2)E150 20.0 8.0 150 1049 944 420 1
20 100 E/7360-38 T495E107(1)020A(2)E060 20.0 8.0 60 1826 1643 730 1
20 100 E/7360-38 T495E107(1)020A(2)E085 20.0 8.0 85 1534 1381 614 1
20 100 E/7360-38 T495E107(1)020A(2)E100 20.0 8.0 100 1414 1273 566 1
20 100 E/7360-38 T495E107(1)020A(2)E200 20.0 8.0 200 1000 900 400 1
20 150 E/7360-38 T495E157(1)020A(2)E080 30.0 8.0 80 1581 1423 632 1
25 0.47 A/3216-18 T495A474(1)025A(2)E4K5 0.5 4.0 4500 129 116 52 1
25 0.47 A/3216-18 T495A474(1)025A(2)E7K0 0.5 4.0 7000 104 94 42 1
25 1A/3216-18 T495A105(1)025A(2)E2K5 0.5 4.0 2500 173 156 69 1
25 1A/3216-18 T495A105(1)025A(2)E3K0 0.5 4.0 3000 158 142 63 1
25 1A/3216-18 T495A105(1)025A(2)E4K0 0.5 4.0 4000 137 123 55 1
25 1A/3216-18 T495A105(1)025A(2)E5K0 0.5 4.0 5000 122 110 49 1
25 2.2 C/6032-28 T495C225(1)025A(2)E1K3 0.6 6.0 1300 291 262 116 1
25 3.3 C/6032-28 T495C335(1)025A(2)E750 0.8 6.0 750 383 345 153 1
25 4.7 C/6032-28 T495C475(1)025A(2)E530 1.2 6.0 530 456 410 182 1
25 4.7 C/6032-28 T495C475(1)025A(2)E575 1.2 6.0 575 437 393 175 1
25 4.7 B/3528-21 T495B475(1)025A(2)E700 1.2 6.0 700 348 313 139 1
25 4.7 B/3528-21 T495B475(1)025A(2)E750 1.2 6.0 750 337 303 135 1
25 4.7 B/3528-21 T495B475(1)025A(2)E800 1.2 6.0 800 326 293 130 1
25 4.7 B/3528-21 T495B475(1)025A(2)E900 1.2 6.0 900 307 276 123 1
25 4.7 B/3528-21 T495B475(1)025A(2)E1K0 1.2 6.0 1000 292 263 117 1
25 6.8 B/3528-21 T495B685(1)025A(2)E1K5 1.7 6.0 1500 238 214 95 1
25 6.8 C/6032-28 T495C685(1)025A(2)E400 1.7 6.0 400 524 472 210 1
25 6.8 C/6032-28 T495C685(1)025A(2)E490 1.7 6.0 490 474 427 190 1
25 6.8 C/6032-28 T495C685(1)025A(2)E500 1.7 6.0 500 469 422 188 1
25 10 B/3528-21 T495B106(1)025A(2)E750 2.5 6.0 750 337 303 135 1
25 10 C/6032-28 T495C106(1)025A(2)E275 2.5 6.0 275 632 569 253 1
25 10 C/6032-28 T495C106(1)025A(2)E300 2.5 6.0 300 606 545 242 1
25 10 C/6032-28 T495C106(1)025A(2)E450 2.5 6.0 450 494 445 198 1
25 10 D/7343-31 T495D106(1)025A(2)E1K2 2.5 6.0 1200 354 319 142 1
25 15 D/7343-31 T495D156(1)025A(2)E100 3.8 6.0 100 1225 1103 490 1
25 15 D/7343-31 T495D156(1)025A(2)E230 3.8 4.0 230 808 727 323 1
25 15 D/7343-31 T495D156(1)025A(2)E275 3.8 6.0 275 739 665 296 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 1313
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
25 15 D/7343-31 T495D156(1)025A(2)4095 3.8 6.0 275 739 665 296 1
25 15 X/7343-43 T495X156(1)025A(2)E200 3.8 4.0 200 908 817 363 1
25 15 X/7343-43 T495X156(1)025A(2)4095 3.8 4.0 200 908 817 363 1
25 22 C/6032-28 T495C226(1)025A(2)E275 5.5 6.0 275 632 569 253 1
25 22 C/6032-28 T495C226(1)025A(2)E280 5.5 6.0 280 627 564 251 1
25 22 C/6032-28 T495C226(1)025A(2)E300 5.5 8.0 300 606 545 242 1
25 22 C/6032-28 T495C226(1)025A(2)E900 5.5 6.0 900 350 315 140 1
25 22 D/7343-31 T495D226(1)025A(2)E200 5.5 6.0 200 866 779 346 1
25 22 D/7343-31 T495D226(1)025A(2)E230 5.5 6.0 230 808 727 323 1
25 22 X/7343-43 T495X226(1)025A(2)E225 5.5 4.0 225 856 770 342 1
25 22 X/7343-43 T495X226(1)025A(2)4095 5.5 4.0 225 856 770 342 1
25 33 D/7343-31 T495D336(1)025A(2)E090 8.3 6.0 90 1291 1162 516 1
25 33 D/7343-31 T495D336(1)025A(2)E100 8.3 6.0 100 1225 1103 490 1
25 33 D/7343-31 T495D336(1)025A(2)E150 8.3 6.0 150 1000 900 400 1
25 33 D/7343-31 T495D336(1)025A(2)E200 8.3 6.0 200 866 779 346 1
25 33 D/7343-31 T495D336(1)025A(2)E225 8.3 6.0 225 816 734 326 1
25 33 D/7343-31 T495D336(1)025A(2)E230 8.3 6.0 230 808 727 323 1
25 33 D/7343-31 T495D336(1)025A(2)E300 8.3 6.0 300 707 636 283 1
25 33 X/7343-43 T495X336(1)025A(2)E100 8.3 4.0 100 1285 1157 514 1
25 33 X/7343-43 T495X336(1)025A(2)E175 8.3 4.0 175 971 874 388 1
25 33 X/7343-43 T495X336(1)025A(2)E200 8.3 4.0 200 908 817 363 1
25 33 X/7343-43 T495X336(1)025A(2)4095 8.3 4.0 175 971 874 388 1
25 47 X/7343-43 T495X476(1)025A(2)E080 11.8 6.0 80 1436 1292 574 1
25 47 X/7343-43 T495X476(1)025A(2)E100 11.8 6.0 100 1285 1157 514 1
25 47 X/7343-43 T495X476(1)025A(2)E120 11.8 6.0 120 1173 1056 469 1
25 47 X/7343-43 T495X476(1)025A(2)E150 11.8 6.0 150 1049 944 420 1
25 47 X/7343-43 T495X476(1)025A(2)E185 11.8 6.0 185 944 850 378 1
25 47 X/7343-43 T495X476(1)025A(2)E200 11.8 6.0 200 908 817 363 1
25 47 D/7343-31 T495D476(1)025A(2)E100 11.8 6.0 100 1225 1103 490 1
25 47 D/7343-31 T495D476(1)025A(2)E120 11.8 6.0 120 1118 1006 447 1
25 47 D/7343-31 T495D476(1)025A(2)E130 11.8 6.0 130 1074 967 430 1
25 47 D/7343-31 T495D476(1)025A(2)E150 11.8 6.0 150 1000 900 400 1
25 47 D/7343-31 T495D476(1)025A(2)E250 11.8 6.0 250 775 698 310 1
25 68 D/7343-31 T495D686(1)025A(2)E150 17.0 10.0 150 1000 900 400 1
25 68 D/7343-31 T495D686(1)025A(2)E200 17.0 10.0 200 866 779 346 1
25 68 X/7343-43 T495X686(1)025A(2)E125 17.0 6.0 125 1149 1034 460 1
25 68 X/7343-43 T495X686(1)025A(2)E130 17.0 6.0 130 1127 1014 451 1
25 68 X/7343-43 T495X686(1)025A(2)E150 17.0 6.0 150 1049 944 420 1
25 68 X/7343-43 T495X686(1)025A(2)E200 17.0 6.0 200 908 817 363 1
25 100 X/7343-43 T495X107(1)025A(2)E150 25.0 10.0 150 1049 944 420 1
25 100 E/7360-38 T495E107(1)025A(2)E100 25.0 8.0 100 1414 1273 566 1
35 0.33 A/3216-18 T495A334(1)035A(2)E6K0 0.5 4.0 6000 112 101 45 1
35 0.47 B/3528-21 T495B474(1)035A(2)E1K5 0.5 4.0 1500 238 214 95 1
35 0.47 B/3528-21 T495B474(1)035A(2)E2K2 0.5 4.0 2200 197 177 79 1
35 0.47 B/3528-21 T495B474(1)035A(2)E2K5 0.5 4.0 2500 184 166 74 1
35 0.47 B/3528-21 T495B474(1)035A(2)E11K 0.5 4.0 11000 88 79 35 1
35 1A/3216-18 T495A105(1)035A(2)E3K0 0.5 4.0 3000 158 142 63 1
35 1B/3528-21 T495B105(1)035A(2)E1K5 0.5 4.0 1500 238 214 95 1
35 1B/3528-21 T495B105(1)035A(2)E1K7 0.5 4.0 1700 224 202 90 1
35 1B/3528-21 T495B105(1)035A(2)E2K0 0.5 4.0 2000 206 185 82 1
35 1B/3528-21 T495B105(1)035A(2)E7K0 0.5 4.0 7000 110 99 44 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 1414
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
35 2.2 B/3528-21 T495B225(1)035A(2)E1K5 0.8 6.0 1500 238 214 95 1
35 2.2 B/3528-21 T495B225(1)035A(2)E2K0 0.8 6.0 2000 206 185 82 1
35 2.2 C/6032-28 T495C225(1)035A(2)E750 0.8 6.0 750 383 345 153 1
35 3.3 B/3528-21 T495B335(1)035A(2)E1K0 1.2 6.0 1000 292 263 117 1
35 3.3 B/3528-21 T495B335(1)035A(2)E900 1.2 6.0 900 307 276 123 1
35 3.3 C/6032-28 T495C335(1)035A(2)E525 1.2 6.0 525 458 412 183 1
35 3.3 C/6032-28 T495C335(1)035A(2)E550 1.2 6.0 550 447 402 179 1
35 3.3 C/6032-28 T495C335(1)035A(2)E600 1.2 6.0 600 428 385 171 1
35 4.7 B/3528-21 T495B475(1)035A(2)E1K0 1.6 6.0 1000 292 263 117 1
35 4.7 C/6032-28 T495C475(1)035A(2)E450 1.6 6.0 450 494 445 198 1
35 4.7 C/6032-28 T495C475(1)035A(2)E500 1.6 6.0 500 469 422 188 1
35 4.7 C/6032-28 T495C475(1)035A(2)E600 1.6 6.0 600 428 385 171 1
35 4.7 C/6032-28 T495C475(1)035A(2)4095 1.6 6.0 600 428 385 171 1
35 4.7 D/7343-31 T495D475(1)035A(2)E300 1.6 6.0 300 707 636 283 1
35 6.8 C/6032-28 T495C685(1)035A(2)E1K8 2.4 6.0 1800 247 222 99 1
35 6.8 D/7343-31 T495D685(1)035A(2)E150 2.4 6.0 150 1000 900 400 1
35 6.8 D/7343-31 T495D685(1)035A(2)E300 2.4 6.0 300 707 636 283 1
35 6.8 D/7343-31 T495D685(1)035A(2)E400 2.4 6.0 400 612 551 245 1
35 6.8 X/7343-43 T495X685(1)035A(2)E300 2.4 4.0 300 742 668 297 1
35 6.8 X/7343-43 T495X685(1)035A(2)4095 2.4 4.0 300 742 668 297 1
35 10 D/7343-31 T495D106(1)035A(2)E120 3.5 4.0 120 1118 1006 447 1
35 10 D/7343-31 T495D106(1)035A(2)E125 3.5 6.0 125 1095 986 438 1
35 10 D/7343-31 T495D106(1)035A(2)E130 3.5 6.0 130 1074 967 430 1
35 10 D/7343-31 T495D106(1)035A(2)E250 3.5 6.0 250 775 698 310 1
35 10 D/7343-31 T495D106(1)035A(2)E260 3.5 6.0 260 760 684 304 1
35 10 D/7343-31 T495D106(1)035A(2)E300 3.5 6.0 300 707 636 283 1
35 10 D/7343-31 T495D106(1)035A(2)E1K0 3.5 6.0 1000 387 348 155 1
35 10 D/7343-31 T495D106(1)035A(2)4095 3.5 4.0 300 707 636 283 1
35 10 X/7343-43 T495X106(1)035A(2)E175 3.5 6.0 175 971 874 388 1
35 10 X/7343-43 T495X106(1)035A(2)E200 3.5 6.0 200 908 817 363 1
35 10 X/7343-43 T495X106(1)035A(2)E250 3.5 4.0 250 812 731 325 1
35 10 X/7343-43 T495X106(1)035A(2)E260 3.5 4.0 260 797 717 319 1
35 10 X/7343-43 T495X106(1)035A(2)4095 3.5 4.0 250 812 731 325 1
35 15 C/6032-28 T495C156(M)035A(2)E350 5.3 6.0 350 561 505 224 1
35 15 D/7343-31 T495D156(1)035A(2)E225 5.3 6.0 225 816 734 326 1
35 15 D/7343-31 T495D156(1)035A(2)E260 5.3 6.0 260 760 684 304 1
35 15 D/7343-31 T495D156(1)035A(2)E300 5.3 6.0 300 707 636 283 1
35 15 X/7343-43 T495X156(1)035A(2)E200 5.3 6.0 200 908 817 363 1
35 15 X/7343-43 T495X156(1)035A(2)E225 5.3 6.0 225 856 770 342 1
35 15 X/7343-43 T495X156(1)035A(2)E250 5.3 6.0 250 812 731 325 1
35 15 X/7343-43 T495X156(1)035A(2)E260 5.3 6.0 260 797 717 319 1
35 15 X/7343-43 T495X156(1)035A(2)4095 5.3 6.0 225 856 770 342 1
35 22 D/7343-31 T495D226(1)035A(2)E125 7.7 6.0 125 1095 986 438 1
35 22 D/7343-31 T495D226(1)035A(2)E200 7.7 6.0 200 866 779 346 1
35 22 D/7343-31 T495D226(1)035A(2)E250 7.7 6.0 250 775 698 310 1
35 22 D/7343-31 T495D226(1)035A(2)E260 7.7 6.0 260 760 684 304 1
35 22 D/7343-31 T495D226(1)035A(2)E300 7.7 6.0 300 707 636 283 1
35 22 X/7343-43 T495X226(1)035A(2)E125 7.7 6.0 125 1149 1034 460 1
35 22 X/7343-43 T495X226(1)035A(2)E130 7.7 6.0 130 1127 1014 451 1
35 22 X/7343-43 T495X226(1)035A(2)E180 7.7 6.0 180 957 861 383 1
35 22 X/7343-43 T495X226(1)035A(2)E200 7.7 6.0 200 908 817 363 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 1515
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates
termination nish.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked
with the higher voltage rating. Substitutions can include better than series.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
35 22 X/7343-43 T495X226(1)035A(2)E260 7.7 6.0 260 797 717 319 1
35 22 X/7343-43 T495X226(1)035A(2)E275 7.7 6.0 275 775 698 310 1
35 22 X/7343-43 T495X226(1)035A(2)E300 7.7 6.0 300 742 668 297 1
35 22 X/7343-43 T495X226(1)035A(2)4095 7.7 6.0 300 742 668 297 1
35 33 D/7343-31 T495D336(1)035A(2)E200 11.6 6.0 200 866 779 346 1
35 33 D/7343-31 T495D336(1)035A(2)E300 11.6 6.0 300 707 636 283 1
35 33 X/7343-43 T495X336(1)035A(2)E100 11.6 6.0 100 1285 1157 514 1
35 33 X/7343-43 T495X336(1)035A(2)E175 11.6 6.0 175 971 874 388 1
35 33 X/7343-43 T495X336(1)035A(2)E250 11.6 6.0 250 812 731 325 1
35 33 X/7343-43 T495X336(1)035A(2)E260 11.6 6.0 260 797 717 319 1
35 33 E/7360-38 T495E336(1)035A(2)E200 11.6 6.0 200 1000 900 400 1
35 47 X/7343-43 T495X476(1)035A(2)E185 16.5 8.0 185 944 850 378 1
35 47 X/7343-43 T495X476(1)035A(2)E200 16.5 8.0 200 908 817 363 1
35 47 X/7343-43 T495X476(1)035A(2)E230 16.5 8.0 230 847 762 339 1
35 47 X/7343-43 T495X476(1)035A(2)E300 16.5 8.0 300 742 668 297 1
50 1C/6032-28 T495C105(1)050A(2)E1K3 0.5 4.0 1300 291 262 116 1
50 1C/6032-28 T495C105(1)050A(2)E1K6 0.5 4.0 1600 262 236 105 1
50 2.2 D/7343-31 T495D225(1)050A(2)E600 1.1 6.0 600 500 450 200 1
50 3.3 D/7343-31 T495D335(1)050A(2)E700 1.7 6.0 700 463 417 185 1
50 4.7 D/7343-31 T495D475(1)050A(2)E275 2.4 6.0 275 739 665 296 1
50 4.7 D/7343-31 T495D475(1)050A(2)E300 2.4 6.0 300 707 636 283 1
50 4.7 X/7343-43 T495X475(1)050A(2)E300 2.4 4.0 300 742 668 297 1
50 4.7 X/7343-43 T495X475(1)050A(2)4095 2.4 4.0 300 742 668 297 1
50 6.8 D/7343-31 T495D685(1)050A(2)E190 3.4 6.0 190 889 800 356 1
50 6.8 D/7343-31 T495D685(1)050A(2)E200 3.4 6.0 200 866 779 346 1
50 6.8 D/7343-31 T495D685(1)050A(2)E275 3.4 6.0 275 739 665 296 1
50 6.8 D/7343-31 T495D685(1)050A(2)E300 3.4 6.0 300 707 636 283 1
50 6.8 D/7343-31 T495D685(1)050A(2)E400 3.4 6.0 400 612 551 245 1
50 10 X/7343-43 T495X106(1)050A(2)E250 5.0 8.0 250 812 731 325 1
50 10 X/7343-43 T495X106(1)050A(2)E260 5.0 6.0 260 797 717 319 1
50 10 X/7343-43 T495X106(1)050A(2)E300 5.0 6.0 300 742 668 297 1
50 15 X/7343-43 T495X156(1)050A(2)E200 7.5 6.0 200 908 817 363 1
50 15 X/7343-43 T495X156(1)050A(2)E250 7.5 6.0 250 812 731 325 1
50 15 X/7343-43 T495X156(1)050A(2)E300 7. 5 6.0 300 742 668 297 1
VDC µF KEMET/EIA
(See below for
part options)
µAmps +20ºC
Max/5 Min
% @ +20ºC
120 Hz Max
mΩ @ 20ºC
100 kHz Max
(mA) 100 kHz
+25ºC
(mA) 100 kHz
+85ºC
(mA) 100 kHz
+125ºC
Reow Temp
≤ 260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 1616
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Recommended Voltage Derating Guidelines
-55°Cto85°C 85°Cto125°C
% Change in Working DC
Voltage with Temperature
VR67% of VR
Recommended Maximum
Application Voltage
50% of VR33% of VR
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage,ifany,mustnotexceedtheallowablelimitsspeciedfor
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
Temperature Compensation Multipliers
for Maximum Power Dissipation
T≤25°C
T≤85°C
T≤125°C
1.00
0.90
0.40
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
KEMET
Case Code
EIA
Case Code
Maximum Power
Dissipation (P max)
mWatts @ 25°C
w/+20°C Rise
A
3216–18
75
B
352821
85
C
6032–28
110
D
734331
150
X
734343
165
E
7360–38
200
S
3216–12
60
T
3528–12
70
U
6032–15
90
V
7343–20
125
T510X
734343
270
T510E
7360–38
285
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature Compensation
Multiplier table for details.
0%
20%
40%
60%
80%
100%
120%
-55 25 85 125
% Working Voltage
% Change in Working DC Voltage
with Temperature
Temperature (ºC)
67%
33%
Recommended Maximum
Application Voltage (As %
of Rated Voltage)
R = ESR at specied frequency (ohms)
Z = Impedance at specied frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 1717
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positiveterminalisidentiedonthecapacitorbodybyastripeplusinsomecasesabevelededge.Asmalldegreeoftransientreverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature Permissible Transient Reverse Voltage
25°C
15% of Rated Voltage
85°C
5% of Rated Voltage
12C
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case
EIA
W
L
S
V1
V2
W
L
S
V1
V2
W
L
S
V1
V2
A
3216–18
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
B
352821
2.35
2.21
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
C
6032–25
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
D
734331
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
L
6032-19
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
M
3528-15
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
H
7360-20
4.25
2.77
3.67
10.22
7.3 0
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
E
1
7360–38
4.25
2.77
3.67
10.22
7.3 0
4.13
2.37
3.87
9.12
6.80
4.03
1.99
4.03
8.26
6.54
Q
7343-12
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
R2
2012-12
1.05
1.83
0.15
4.82
2.50
0.93
1.50
0.22
3.72
2.00
0.83
1.12
0.38
2.86
1.74
S2
3216–12
1.35
2.20
0.62
6.02
2.80
1.23
1.80
0.82
4.92
2.30
1.13
1.42
0.98
4.06
2.04
T
3528–12
2.35
2.20
0.92
6.32
4.00
2.23
1.80
1.12
5.22
3.50
2.13
1.42
1.28
4.36
3.24
U
6032–15
2.35
2.77
2.37
8.92
4.50
2.23
2.37
2.57
7.82
4.00
2.13
1.99
2.73
6.96
3.74
V
7343–20
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
W
7343–15
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
X
1
734343
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Y
1
734340
2.55
2.77
3.67
10.22
5.60
2.43
2.37
3.87
9.12
5.10
2.33
1.99
4.03
8.26
4.84
Density Level A: For low-density product applications. Recommended for wave solder applications and
provides a wider process window for reow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder
attachment condition for reow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land
pattern variations the user should perform qualication testing based on the conditions outlined in IPC
standard 7351 (IPC–7351).
¹ Height of these chips may create problems in wave soldering.
2 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 1818
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Time
Temperature
T
smin
25ºC to Peak
tL
tS
25
tP
T
smax
TL
TP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
Soldering Process
KEMET’s families of surface mount capacitors are compatible
withwave(singleordual),convection,IR,orvaporphasereow
techniques. Preheating of these components is recommended
toavoidextremethermalstress.KEMET'srecommendedprole
conditionsforconvectionandIRreowreecttheproleconditions
of the IPC/J–STD–020D standard for moisture sensitivity testing.
Thedevicescansafelywithstandamaximumofthreereow
passes at these conditions.
Please note that although the X/7343–43 case size can withstand
wavesoldering,thetallprole(4.3mmmaximum)dictatescarein
wave process development.
Handsolderingshouldbeperformedwithcareduetothedifculty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
andthetermination,untilreowoccurs.Oncereowoccurs,the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
Duringtypicalreowoperations,aslightdarkeningofthegold-
colored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Prole Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (T
Smin
)10C 15C
Temperature Maximum (T
Smax
)15C 200°C
Time (t
s
) from T
smin
to T
smax
) 60 – 120 seconds 60 – 120 seconds
Ramp-up Rate (T
L
to T
P
)3°C/secondsmaximum C/secondsmaximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (t
L
) 60 – 150 seconds 60 – 150 seconds
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Timewithin5°CofMaximum
Peak Temperature (tP)
20 seconds maximum 30 seconds maximum
Ramp-down Rate (TP to TL)
6°C/secondsmaximum
6°C/secondsmaximum
Time25°CtoPeakTemperature 6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
Construction
MnO
2
/Ta
2
O
5
/Ta Silver Adhesive
Carbon
Silver Paint Washer
Tantalum Wire
Weld
Leadframe
(-Cathode) Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 1919
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Capacitor Marking
C, D, X Case Sizes
KEMET
Surge
Robust
MnO2
Rated
Voltage
156
25 K
230
R+ Polarity
Indicator (+)
Picofarad Code
KEMET ID
Date
Code*
* 230 = 30th week of 2012
Date Code *
1
st
digit = Last number of Year
9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to
52 = 52nd week of the Year
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase.KEMETrecommendsthatmaximumstoragetemperaturenotexceed40ºCandmaximumstoragehumiditynotexceed60%
relativehumidity.Temperatureuctuationsshouldbeminimizedtoavoidcondensationonthepartsandatmospheresshouldbefreeof
chlorineandsulphurbearingcompounds.Foroptimizedsolderabilitychipstockshouldbeusedpromptly,preferablywithinthreeyears
of receipt.
KEMET
Industrial
Grade
MnO2
Rated
Voltage
156
25V
Polarity
Indicator (+)
Picofarad
Code
KEMET ID
Date
Code*
K
C6 49 Internal
Code
Date Code*
Year Month
X = 2009 1 = Jan 7 = Jul
A = 2010 2=Feb 8 = Aug
B = 2011 3 = Mar 9 = Spt
C = 2012 4 = Apr O = Oct
D = 2013 5 = May N = Nov
E = 2014 6 = Jun D = Dec
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 2020
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape-fed automatic pick-and-place systems.
Table 3 – Packaging Quantity
Case Code
Tape Width
(mm) 7" Reel* 13" Reel*
KEMET
EIA
I
3216-10
8
3,000
12,000
S
3216-12
8
2,500
10,000
T
3528-12
8
2,500
10,000
M
3528-15
8
2,000
8,000
U
6032-15
12
1,000
5,000
L
6032-19
12
1,000
5,000
W
7343-15
12
1,000
3,000
Z
7343-17
12
1,000
3,000
V
7343-20
12
1,000
3,000
A
3216-18
8
2,000
9,000
B
3528-21
8
2,000
8,000
C
6032-28
12
500
3,000
D
7343-31
12
500
2,500
Y
7343-40
12
500
2,000
X
7343-43
12
500
2,000
E/T428P
7360-38
12
500
2,000
H
7360-20
12
1,000
2,500
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
8 mm (0.315")
or
12 mm (0.472") 180 mm (7.0")
or
330 mm (13.0")
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 2121
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
Po
T
F
W
Center Lines of Cavity
Ao
Bo
User Direction of Unreeling
Cover Tape
Ko
B
1
is for tape feeder reference only,
including draft concentric about B
o.
T
2
ØD
1
ØDo
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1 Table 4
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Minimum
Note 1
E1P0 P2
R Reference
Note 2
S
1
Minimum
Note 3
T Maximum T1 Maximum
8 mm
1.5+0.10/-0.0
(0.059+0.004/-0.0)
1.0
(0.039)
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
25.0
(0.984)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm 1.5
(0.059)
30
(1.181)
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Maximum
Note 4
E2 Minimum F P1 T2 Maximum W Maximum A0, B0 & K0
8 mm Single (4 mm)
4.35
(0.171)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
2.5
(0.098)
8.3
(0.327)
Note 512 mm
Single (4 mm) &
Double (8 mm)
8.2
(0.323)
10.25
(0.404)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
12.3
(0.484)
16 mm Triple (12 mm)
12.1
(0.476)
14.25
(0.561)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
16.3
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 5).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 2222
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf)
Thedirectionofthepullshallbeoppositethedirectionofthecarriertapetravel.Thepullangleofthecarriertapeshallbe165°to180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Tape Maximum
Width (mm) Rotation (°
T)
8,12 20
16 – 200 10 Tape Maximum
Width (mm) Rotation ( °
S)
8,12 20
16 – 56 10
72 – 200 5
Typical Pocket Centerline
Typical Component Centerline
Figure 3 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8 mm & 12 mm Tape
1.0 mm maximum
1.0 mm maximum
16 mm Tape
Figure 4 – Bending Radius
RR
Bending
Radius
Embossed
Carrier
Punched
Carrier
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 2323
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Figure 5 – Reel Dimensions
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm minimum)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Minimum C D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0+0.5/-0.2
(0.521+0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Minimum W
1
W
2
Maximum W
3
8 mm
50
(1.969)
8.4+1.5/-0.0
(0.331+0.059/-0.0)
14.4
(0.567)
Shall accommodate tape width
without interference
12 mm
12.4+2.0/-0.0
(0.488+0.078/-0.0)
18.4
(0.724)
16 mm
16.4+2.0/-0.0
(0.646+0.078/-0.0)
22.4
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 2424
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Figure 6 – Tape Leader & Trailer Dimensions
Trailer
160 mm Minimum
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm
Minimum Leader
400 mm Minimum
Figure 7 – Maximum Camber
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
Elongated sprocket holes
(32 mm & wider tapes)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 2525
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax:864-963-6521
Corporate Of ces
FortLauderdale,FL
Tel: 954-766-2800
North America
Southeast
LakeMary,FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-306-9353
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Paris,France
Tel: 33-1-4646-1006
Sasso Marconi, Italy
Tel: 39-051-939111
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
Espoo,Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2009_T495 • 2/3/2014 2626
Low ESR MnO2 Tantalum & Aluminum Surface Mount Capacitors – T495 Surge Robust Low ESR MnO2 Series
Other KEMET Resources
Tools
Resource Location
CongureAPart:CapEdge http://capacitoredge.kemet.com
SPICE&FITSoftware http://www.kemet.com/spice
SearchOurFAQs:KnowledgeEdge http://www.kemet.com/keask
Electrolytic LifeCalculator http://www.kemet.com:8080/elc
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
notintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.TheInformationisintendedforuseonly
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all productrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.