CURRENT 1.0 Amperes VOLTAGE 50 to 1000 Volts RS101 THRU RS107 Features * Glass Passivated Die Construction * High Case Dielectric Strength of 1500VRMS * Low Reverse Leakage Current * Surge Overload Rating to 65A Peak * Ideal for Printed Circuit Board Applications * Plastic Material - UL Flammability Classification 94V-0 A B - + C H Mechanical Data RS G * Case : Molded Plastic * Terminals : Plated Leads, Solderable per MIL-STD-202, Method 208 * Polarity : As Marked on Body * Approx. Weight : 1.52 grams * Mounting Position : Any * Marking : Type Number Dim Min Max A 15.50 16.00 B 10.00 10.50 C 15.00 D 3.70 4.00 E 2.50 3.00 G 2.30 2.50 H 0.70 T ypical D E A ll Dimens ions in mm Maximum Ratings And Electrical Characteristics (Ratings at 25 ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols RS 101 RS 102 RS 103 RS 104 RS 105 RS 106 RS 107 Units Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRMM VRWM VR 50 100 200 400 600 800 1000 Volts RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 Volts Io 1.0 Amps Non-Repetitive Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load per element (JEDEC method) IFSM 50 Amps Forward Voltage (per element) @ IF=1.0 A VFM 1.0 Volts Peak Reverse Current at Rated DC Blocking Voltage @ TC=25 Average Rectified Output Current @ TC = 50 @ TC=100 Typical Junction Capacitance per Element (Note 2) Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range IRM 10.0 1000 A Cj 25 pF RJC 38 /W Tj TSTG -55 to +150 Notes: (1) Thermal resistance from junction to case per element. Unit mounted on 75 x 75 x 16mm aluminum plate heat sink. (2) Measured at 1.0MHz and Applied Reverse Voltage of 4.0V DC. RATING AND CHARACTERISTIC CURVES RS101 THRU RS107 RECTIFIED 1.0 0.5 I F , INST ANT ANEOUS FWD CURRENT CURRENT 1.5 I O , AVERAGE (A) (A) 2.0 Lead Case Ambient 10 T J = 150C T J = 25C 1.0 0.1 Pulse Width = 300 s 0 0 0 50 100 0 150 0.6 0.8 100 50 C j, CAP ACIT ANCE (pF) 40 1.0 1.2 1.4 T j = 25C f = 1MHz T j = 150c Single Half Sine Wave (JEDEC Method) (A) 30 20 10 10 1 0 1 10 1 100 CURRENT (mA) 10,000 1000 T j = 150C 100 10 V R , REVERSE VOL TAGE (V) Fi g. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60 Hz Fi g. 3 Max Non-Repetitive Peak Fwd Sur ge Current I R , INST ANT ANEOUS REVERSE CURRENT 0.4 V F , INST ANT ANEOUS FWD VOL TAGE (V) Fi g. 2 Typical Fwd Characteristics T, TEMPERA TURE (C) Fi g. 1 Forward Current Deratin g Curve I FSM , PEAK FWD SURGE 0.2 T j = 125C T j = 100C 10 1.0 T j = 25C 0.1 0.01 0 PERCENT 20 40 60 80 100 120 140 OF RA TED PEAK REVERSE VOL TAGE (%) Fi g. 5 Typical Reverse Characteristics 100