FEATURES Small size - Low ESR - Good Pulse Capabilities - Stable with Frequency and Temperature APPLICATIONS General Purpose - Switching Power Supplies - Blocking - Coupling - AC Applications (Not across the Line) Operating Temperature Range Capacitance Tolerance Peak, AC voltage (50/60 Hz) Dissipation Factor (MAX) 25C Insulation Resistance @25C (<70% RH)for 1 minute at 100VDC applied Load Life Damp Heat test Self Inductance Capacitance Drift Factor Capacitance Temperature Coefficient Dielectric Strength Dielectric Construction Coating Leads -55C to +105C +10% at 1 kHz, 25C +5% optional WVDC 100 250 400 630 1000 VAC 63 200 220 250 300 For T>+85C , The voltage must be decreased by 1.5% per C Frequency C<0.1uF 0.1uF<C<1uF 1uF<C<3uF 3uF<C<5uF C>5uF (kHz) 1 0.1% 0.1% 0.1% 0.1% 0.1% 100 0.4% 0.7% 1.2% 1.8% 2.8% Insulation Capacitance Resistance <0.33F 30000 M >0.33F 10000 MxF 2000 Hours, +85C with 125% of rated voltage Capacitance Change <3% of initially measured value Dissipation Factor <0.001 at 1kHz and 25C Insulation Resistance >50% of maximum specified value 56 days at40C with 90 to 95%RH, +40C and no voltage applied Capacitance Change <3% of initially measured value Dissipation Factor <0.001 at 1kHz and 25C Insulation Resistance >50% of maximum specified value <1 nanoHenry per mm of body length and lead length <0.5% after 2 years at 40C 200 ppm/C, +100ppm/C Terminal to Terminal 160% of rated VDC or VAC applied for 2 Seconds and 25C Polypropylene Metallized film Flame Retardant epoxy resin (UL94V0) Lead free tinned copper leads L MAX S+1.0 G MAX d +0.05 12 10 1.5 0.6 18.5 15 1.5 0.8 26 22.5 1.5 0.8 31 27.5 1.5 0.8 MPR Capacitance WVDC (F) IC PART NUMBER dv/dt Dims LxHxT (mm) (v/ sec.) Metallized Polypropylene Epoxy Dipped Radial Lead S (MM) d (MM) Capacitance WVDC (F) IC PART NUMBER dv/dt Dims LxHxT (mm) (v/ sec.) S (MM) d (MM) 0.01 400 103MPR400K 350 13x9x5 10 0.6 0.15 250 154MPR250K 200 18x11x7 15 0.8 0.01 630 103MPR630K 420 13x10x6 10 0.6 0.15 400 154MPR400K 185 26x13x7.5 22.5 0.8 0.015 250 153MPR250K 220 13x9x5 10 0.6 0.15 630 154MPR630K 230 26x17x11 22.5 0.8 0.015 400 153MPR400K 350 13x9.5x5 10 0.6 0.22 250 224MPR250K 200 18x12.5x7.5 15 0.8 0.015 630 153MPR630K 420 13x11x7 10 0.6 0.22 400 224MPR400K 165 26x14x8.5 22.5 0.8 0.022 250 223MPR250K 220 13x9x5 10 0.6 0.22 630 224MPR630K 180 31x17.5x10.5 27.5 0.8 0.022 400 223MPR400K 350 13x10.5x5.5 10 0.6 0.22 1000 224MPR102K 135 31x18x9 27.5 0.8 0.022 630 223MPR630K 420 13x12.5x8.5 10 0.6 0.33 250 334MPR250K 200 18x13x8.5 15 0.8 0.033 250 333MPR250K 220 13x9x5.5 10 0.6 0.33 400 334MPR400K 165 26x15x10 22.5 0.8 0.033 400 333MPR400K 350 13x11x6.5 10 0.6 0.33 630 334MPR630K 180 31x21.5x13 27.5 0.8 0.033 630 333MPR630K 400 18x11.5x7.5 15 0.8 0.47 100 474MPR100K 100 18.5x14x8 15 0.8 0.047 250 473MPR250K 220 13x9.5x5.5 10 0.6 0.47 250 474MPR250K 110 26x14x8.5 22.5 0.8 0.047 400 473MPR400K 350 13x11x7.5 10 0.6 0.47 400 474MPR400K 150 31x16.5x10.5 27.5 0.8 0.047 630 473MPR630K 400 18x13.5x8.5 15 0.8 0.47 630 474MPR630K 180 31x24.5x15.5 27.5 0.8 0.068 250 683MPR250K 220 13x10.5x6 10 0.6 0.47 1000 474MPR102K 135 31x22x13 27.5 0.8 0.068 400 683MPR400K 300 18x12x6.5 15 0.8 0.68 250 684MPR250K 115 26x15x9.5 22.5 0.8 0.068 630 683MPR630K 400 18x15.5x9.5 15 0.8 1 250 105MPR250K 110 26x16x12 22.5 0.8 0.1 250 104MPR250K 220 13x11x7 10 0.6 1 400 105MPR400K 150 31x22x15 27.5 0.8 0.1 400 104MPR400K 300 18x12.5x7.5 15 0.8 1.5 250 155MPR250K 100 31x18x13 27.5 0.8 0.1 630 104MPR630K 230 26x15x10 22.5 0.8 2.2 250 225MPR250K 100 31x21x15 27.5 0.8