Data Sheet HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Description These non-diffused lamps out-perform conventional LED lamps. By using new higher intensity material, superior product performance is achived. Features The HLMP-3750/3390/1340 Series Lamps are Gallium Arsenide Phosphide on Gallium Phosphide red light emitting diodes. The HLMP-3850/3490/1440 Series are Gallium Arsenide Phosphide on Gallium Phosphide yellow light emitting diodes. The HLMP-3950/3590/3960/1540/ K640 Series Lamps are Gallium Phosphide green light emitting diodes. Improved brightness Improved color performance Available in popular T-1 and T-1 3/4 packages New sturdy leads IC compatible/low current capability Reliable and rugged Choice of three bright colors - High Efficiency Red - High Brightness Yellow - High Performance Green Applications Broadcom Lighted switches Backlighting front panels Light pipe sources Keyboard indicators AV02-1556EN July 19, 2017 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Package Dimensions Figure 1: Package Outline "A" HLMP-3750/3850/3950 Figure 2: Package Outline "B" HLMP-3390/3490/3590 Figure 3: Package Outline "C" HLMP-1340/1440/1540 5.08 (0.200) 4.57 (0.180) 13.25 (0.522) 12.45 (0.490) 0.89 (0.035) 0.64 (0.025) O 3.43 (.135) 2.92 (.115) 9.19 (0.362) 8.43 (0.332) 1.32 (0.052) 1.02 (0.040) 23.0 MIN. (0.90) 3.17 (.125) 2.67 (.105) 4.70 (.185) 4.19 (.165) 1.14 (.045) 0.51 (.020) 6.35 (.250) 5.58 (.220) 0.65 (0.026) max. 0.46 (0.018) SQUARE NOMINAL 24.1 (.95) min. 1.27 (0.050) NOM. 1.52 (.060) 1.02 (.040) 6.1 (0.240) 5.6 (0.220) CATHODE 2.54 (0.100) NOM. (0.022) 0.55 SQ. TYP. (0.016) 0.40 2.79 (.110) 2.29 (.090) NOTE: 1. All dimensions are in millimeters (inches). 2. An epoxy meniscus may extend about 1 mm (0.40 in.) down the leads. 3. For PCB hole recommendations, see Precautions. Broadcom AV02-1556EN 2 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet Figure 4: Package Outline "D" HLMP-3914 T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Figure 5: Package Outline "E" HLMP-3960 5.08 (0.200) 4.57 (0.180) 9.19 (0.362) 8.43 (0.332) 0.65 MAX. (0.026) Figure 6: Package Outline "F" HLMP-3707/3907 5.08 (0.200) 4.78 (0.188) 5.08 (0.200) 4.78 (0.188) 12.47 (0.491) 11.71 (0.461) 0.89 (0.035) 0.64 (0.025) 1.02 (0.040) MAX. 9.07 (0.357) 8.56 (0.337) 13.11 (0.516) 12.34 (0.486) 0.89 (0.035) 0.64 (0.025) 0.89 (0.035) 0.64 (0.025) 0.65 (0.026) MAX. 25.40 (1.00) MIN. 1.02 (0.040) MAX. EPOXY MENISCUS 1.32 (0.052) 1.02 (0.040) 23.0 MIN. (0.900) 22.86 (0.900) MIN. CATHODE LEAD (NOTE 1) 1.27 (0.050) NOM. 9.07 (0.357) 8.56 (0.337) 0.46 (0.018) SQUARE NOM. 1.52 (0.060) 1.02 (0.040) 6.10 (0.240) 5.59 (0.220) 0.46 (0.018) SQUARE NOMINAL O 6.10 (0.240) 5.60 (0.220) CATHODE FLAT 2.54 (0.100) NOM. 2.54 (0.100) NOM. 1.52 (0.060) 1.02 (0.040) CATHODE FLAT 0.53 (0.021) 0.43 (0.017) SQ. 6.10 (0.240) 5.60 (0.220) 2.79 (0.110) 2.29 (0.090) NOTE: 1. All dimensions are in millimeters (inches). 2. An epoxy meniscus may extend about 1 mm (0.40 in.) down the leads. 3. For PCB hole recommendations, see Precautions. Broadcom AV02-1556EN 3 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Selection Guide Luminous Intensity Iv (mcd) @ 20 mA Package Description Color Device HLMP- Min. Typ. Max. 21/2 Degree Package Outline T-1 3/4 Red 3707-L00xx 90.2 -- -- 24 F A T-1 3/4 Low Profile T-1 3750 90.2 125.0 -- 24 3750-L00xx 90.2 125.0 -- 24 A Yellow 3850 96.2 140.0 -- 24 A 3850-K00xx 96.2 140.0 -- 24 A Green 3907-K00xx 111.7 -- -- 24 F 3914 111.7 -- -- 24 D Red 3950 111.7 265.0 -- 24 A 3950-K00xx 111.7 265.0 -- 24 A 3950-LM000 170.0 300.0 490.0 24 A 3960-K0xxx 111.7 265.0 -- 24 E 3950-MNC00 245.0 490.0 760.0 24 A 3390 35.2 55.0 -- 32 B Yellow 3490 37.6 55.0 -- 32 B Green 3590 43.6 55.0 -- 32 B Red 1340 35.2 55.0 -- 45 C 1340-J00xx 35.2 55.0 -- 45 C Yellow 1440 23.5 45.0 -- 45 C 1440-H00xx 23.5 45.0 -- 45 C Green Emerald Green 1440-HJ000 23.5 45.0 120.2 45 C 1440-IJB00 37.6 75.0 120.2 45 C 1540 27.3 45.0 -- 45 C 1540-H00xx 27.3 45.0 -- 45 C 1540-IJ000 43.6 60.0 139.6 45 C K640 4.2 21.0 -- 45 C Absolute Maximum Ratings at TA = 25C Parameter Red Yellow Green/Emerald Green Units Peak Forward Current 90 60 90 mA Average Forward Currenta 25 20 25 mA DC Currentb 30 20 30 mA Transient Forward Currentc (10-s Pulse) 500 500 500 mA 5 5 5 V 110 110 110 C Reverse Voltage (IR = 100 A) LED Junction Temperature Operating Temperature Range -40 to +100 -40 to +100 -20 to +100 C Storage Temperature Range -40 to +100 -40 to +100 -40 to +100 C a. See Figure 8 to establish pulsed operating conditions. b. For Red and Green series derate linearly from 50C at 0.5 mA/C. For Yellow series derate linearly from 50C at 0.2 mA/C. c. The transient peak current is the maximum non-recurring peak current the devices can withstand without damaging the LED die and wire bonds. It is not recommended that the device be operated at peak currents beyond the Absolute Maximum Peak Forward Current. Broadcom AV02-1556EN 4 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Electrical/Optical Characteristics at TA = 25C Parameter Symbol T-1 3/4 T-1 -3/4 Low Dome T-1 Min. Typ. Max. Peak Wavelength PEAK 37xx 3390 1340 -- 635 -- 38xx 3490 1440 -- 583 -- 39xx 3590 1540 -- 565 -- K640 -- 558 -- Dominant Wavelength Spectral Line Halfwidth Speed of Respond Capacitance Thermal Resistance Forward Voltage Reverse Breakdown Voltage Luminous Efficacy d 3 /4 s C RJ-PIN VF VR v 37xx 3390 1340 -- 626 -- 38xx 3490 1440 -- 585 -- 39xx 3590 1540 -- 569 -- K640 -- 560 -- 37xx 3390 1340 -- 40 -- 38xx 3490 1440 -- 36 -- 39xx 3590 -- 1540 -- 28 K640 -- 24 -- 90 -- 37xx 3390 1340 -- 38xx 3490 1440 -- 90 -- 39xx 3590 1540 -- 500 -- K640 -- 3100 -- 37xx 3390 1340 -- 11 -- 38xx 3490 1440 -- 15 -- 39xx 3590 1540 -- 18 -- K640 -- 35 -- 37xx 3390 -- 210 -- 38xx 3490 -- 210 -- 39xx 3590 -- 210 -- -- 510 -- 1340 -- 290 -- 1440 -- 290 -- 1540 -- 290 -- K640 -- 290 -- 37xx 3390 1340 1.5 1.9 2.6 38xx 3490 1440 1.5 2.1 2.6 39xx 3590 1540 1.5 2.2 3.0 K640 -- 2.2 3.0 37xx 3390 1340 5.0 -- -- 38xx 3490 1440 -- -- -- 39xx 3590 -- 1540 -- -- K640 -- -- -- 37xx 3390 1340 -- 145 -- 38xx 3490 1440 -- 500 -- 39xx 3590 1540 -- 595 -- K640 -- 655 -- Units Test Conditions nm Measurement at Peak nm Note a nm ns pF C/W VF = 0, f = 1 MHz Junction to Cathode Lead V IF = 20 mA V IR = 100 A lumens/ Note b watt a. The dominant wavelength,d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. b. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = IV/V , where IV is the luminous intensity in candelas and V is the luminous efficacy in lumens/watt. Broadcom AV02-1556EN 5 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Part Numbering System H L M P - x1 x2 x3 x4 - x5 Code Description Option x1 Package Type 1 x2 Color x6 x7 K T-1 (3 mm) 3 T-1 3/4 (5 mm) 3, 7 Gap HER 4, 8 GaP Yellow (except K4xx series) 5, 9 Gap Green 6 GaP Emerald Green Product Specific Designation -- x5 Minimum Intensity Bin See Intensity Bin Limits x6 Maximum Intensity Bin x7 x8x9 Broadcom Color Bin Selection Packaging Option x9 T-1 (3 mm) x3x4 Maximum lv Bin x8 0 Open (no maximum limit) Others Refer to the lv Bin Table 0 Full range B Color bin 2 and 3 only C Color bin 3 and 4 only 00 Bulk packaging 01 Tape and reel, crimped leads 02 Tape and reel, straight leads A1 Right angle housing, uneven leads A2, B2 Right angle housing, even leads AV02-1556EN 6 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Intensity Bin Limits Intensity Range (mcd) Intensity Range (mcd) Color Red Yellow Broadcom Bin Min. Max. G 9.7 15.5 H 15.5 24.8 I 24.8 39.6 J 39.6 63.4 K 63.4 101.5 L 101.5 162.4 M 162.4 234.6 N 234.6 340.0 O 340.0 540.0 P 540.0 850.0 Q 850.0 1200.0 R 1200.0 1700.0 S 1700.0 2400.0 T 2400.0 3400.0 U 3400.0 4900.0 V 4900.0 7100.0 W 7100.0 10200.0 X 10200.0 14800.0 Y 14800.0 21400.0 Z 21400.0 30900.0 F 10.3 16.6 G 16.6 26.5 H 26.5 42.3 I 42.3 67.7 J 67.7 108.2 K 108.2 173.2 L 173.2 250.0 M 250.0 360.0 N 360.0 510.0 O 510.0 800.0 P 800.0 1250.0 Q 1250.0 1800.0 R 1800.0 2900.0 S 2900.0 4700.0 T 4700.0 7200.0 U 7200.0 11700.0 V 11700.0 18000.0 W 18000.0 27000.0 Color Green/ Emerald Green Bin Min. Max. A 1.1 1.8 B 1.8 2.9 C 2.9 4.7 D 4.7 7.6 E 7.6 12.0 F 12.0 19.1 G 19.1 30.7 H 30.7 49.1 I 49.1 78.5 J 78.5 125.7 K 125.7 201.1 L 201.1 289.0 M 289.0 417.0 N 417.0 680.0 O 680.0 1100.0 P 1100.0 1800.0 Q 1800.0 2700.0 R 2700.0 4300.0 S 4300.0 6800.0 T 6800.0 10800.0 U 10800.0 16000.0 V 16000.0 25000.0 W 25000.0 40000.0 Maximum tolerance for each bin limit is 18%. AV02-1556EN 7 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Color Categories Lambda (nm) Lambda (nm) Color Cat # Min. Max. 9 552.5 555.5 8 555.5 558.5 7 558.5 561.5 6 561.5 564.5 6 561.5 564.5 5 564.5 567.5 4 567.5 570.5 3 570.5 573.5 2 573.5 576.5 1 582.0 584.5 3 584.5 587.0 2 587.0 589.5 4 589.5 592.0 5 592.0 593.0 Emerald Green Green Yellow Color Cat # Min. Max. Orange 1 597.0 599.5 2 599.5 602.0 3 602.0 604.5 4 604.5 607.5 5 607.5 610.5 6 610.5 613.5 7 613.5 616.5 8 616.5 619.5 Packaging Option Matrix Packaging Option Code Definition 00 Bulk Packaging, minimum increment 500 pcs/bag 01 Tape and Reel, crimped leads, min. increment 1300 pcs/bag for T-1 3/4, 1800 pcs/bag for T-1 02 Tape and Reel, straight leads, min. increment 1300 pcs/bag for T-1 3/4, 1800 pcs/bag for T-1 A1 T-1, Right Angle Housing, uneven leads, minimum increment 500 pcs/bag A2 T-1, Right Angle Housing, even leads, minimum increment 500 psc/bag B2 T-1 3/4, Right Angle Housing, even leads, minimum increment 500 psc/bag NOTE: Broadcom All categories are established for classification of products. Products may not be available in all categories. Please contact your local Broadcom representative for further clarification and information. AV02-1556EN 8 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Red, Yellow, and Green Figure 7: Relative Intensity vs. Wavelength 1.0 EMERALD GREEN T A= 25 C RELATIVE INTENSITY GREEN HIGH EFFICIENCY RED 0.5 YELLOW 0 500 550 600 650 700 WAVELENGTH - nm Figure 8: Maximum Tolerable Peak Current vs. Pulse Duration (IDC MAX as per MAX Ratings) Figure 9: Forward Current vs. Forward Voltage Figure 10: Relative Luminous Intensity vs. Forward Current Figure 11: Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current Broadcom AV02-1556EN 9 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet Figure 12: Relative Luminous Intensity vs. Angular Displacement, T-1 3/4 Lamp T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Figure 13: Relative Luminous Intensity vs. Angular Displacement, T-1 3/4 Low Profile Lamp Figure 14: Relative Luminous Intensity vs. Angular Displacement, T-1 Lamp Broadcom AV02-1556EN 10 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Packaging Label Broadcom Mother Label Available on packaging box of ammo pack and shipping box. (1P) Item: Part Number STANDARD LABEL LS0002 RoHS Compliant e3 max temp 250C (1T) Lot: Lot Number (Q) QTY: Quantity LPN: CAT: Intensity Bin (9D)MFG Date: Manufacturing Date BIN: Color Bin (P) Customer Item: (V) Vendor ID: (9D) Date Code: Date Code DeptID: Made In: Country of Origin Broadcom AV02-1556EN 11 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Broadcom Baby Label Only available on bulk packaging. Lamps Baby Label (1P) PART #: Part Number RoHS Compliant e3 max temp 250C (1T) LOT #: Lot Number (9D)MFG DATE: Manufacturing Date QUANTITY: Packing Quantity C/O: Country of Origin Customer P/N: CAT: Intensity Bin Supplier Code: BIN: Color Bin DATECODE: Date Code Broadcom AV02-1556EN 12 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet Precautions T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Lead Forming Preform or cut the leads of an LED lamp to length prior to insertion and soldering on PC board. For better control, use proper tool to precisely form and cut the leads to applicable length rather than doing it manually. If manual lead cutting is necessary, cut the leads after the soldering process. The solder connection forms a mechanical ground that prevents mechanical stress due to lead cutting from traveling into LED package. This is highly recommended for hand solder operation, as the excess lead length also acts as small heat sink. NOTE: - PCBs with different size and design (component density) will have different heat mass (heat capacity). This might cause a change in temperature experienced by the board if same wave soldering setting is used. So, you should recalibrate the soldering profile again before loading a new type of PCB. - Take extra precautions during wave soldering to ensure that the maximum wave temperature does not exceed 250C and the solder contact time does not exceeding 3s. Over-stressing the LED during soldering process might cause premature failure to the LED due to delamination. Soldering and Handling Take care during PCB assembly and soldering process to prevent damage to the LED component. The LED component may be effectively hand soldered to PCB. However, it is only recommended under unavoidable circumstances, such as rework. The closest manual soldering distance of the soldering heat source (soldering iron's tip) to the body is 1.59 mm. Soldering the LED using soldering iron tip closer than 1.59 mm might damage the LED. 1.59 mm Apply proper ESD precaution on the soldering station and by personnel to prevent ESD damage to the LED component that is ESD sensitive. For details, refer to Broadcom application note AN 1142. The soldering iron used should have a grounded tip to ensure electrostatic charge is properly grounded. Recommended soldering conditions follow. Wave Solderinga, b Manual Solder Dipping 105C Max. -- Pre-heat Time 60 sec Max. -- Peak Temperature 250C Max. 260C Max. Dwell Time 3 sec Max. 5 sec Max. Pre-heat Temperature a. These conditions refer to measurement with a thermocouple mounted at the bottom of PCB. b. To reduce thermal stress experienced by the LED, it is recommended that you use only the bottom preheaters. Broadcom Set and maintain wave soldering parameters according to the recommended temperature and dwell time. Perform daily checks on the soldering profile to ensure that it is always conforming to recommended soldering conditions. Any alignment fixture that is being applied during wave soldering should be loosely fitted and should not apply weight or force on the LED. Nonmetal material is recommended as it will absorb less heat during wave soldering process. At elevated temperature, the LED is more susceptible to mechanical stress. Therefore, PCB must allowed to cool down to room temperature prior to handling, which includes removal of alignment fixture or pallet. If PCB board contains both through hole (TH) LED and other surface mount components, solder surface-mount components on the top side of the PCB. If surfacemount must be on the bottom side, solder these components using reflow soldering prior to insertion the TH LED. Recommended PC board plated through holes (PTH) size for LED component leads: LED Component Plated ThroughLead Size Diagonal Hole Diameter Lead size (typ.) 0.45 x 0.45 mm 0.636 mm 0.98 to 1.08 mm (0.018 x 0.018 in.) (0.025 in.) (0.039 to 0.043 in.) Dambar shear- 0.65 mm off area (max.) (0.026 in.) 0.919 mm (0.036 in.) Lead size (typ.) 0.50 x 0.50 mm 0.707 mm 1.05 to 1.15 mm (0.020 x 0.020 in.) (0.028 in.) (0.041 to 0.045 in.) Dambar shear- 0.70 mm off area (max.) (0.028 in.) 0.99 mm (0.039 in.) Over-sizing the PTH can lead to a twisted LED after it is clinched. On the other hand, undersizing the PTH can make inserting the TH LED difficult. For more information about soldering and handling of TH LED lamps, refer to application note AN5334. AV02-1556EN 13 HLMP-3707, HLMP-3907, HLMP-3750, HLMP-3850, HLMP-3950, HLMP-3960, HLMP-3390, HLMP-3490, HLMP-3590, HLMP-1340, HLMP-1440, HLMP-1540, HLMP-K640 Data Sheet T-1 3/4 (5 mm), T-1 (3 mm), Ultra-Bright LED Lamps Example of Wave Soldering Temperature Profile for TH LED LAMINAR HOT AIR KNIFE TURBULENT WAVE 250 Recommended solder: Sn63 (Leaded solder alloy) SAC305 (Lead free solder alloy) Flux: Rosin flux Solder bath temperature: 245C 5C (maximum peak temperature = 250C) TEMPERATURE (C) 200 Dwell time: 1.5 sec - 3.0 sec (maximum = 3 sec) 150 Note: Allow for board to be sufficiently cooled to room temperature before exerting mechanical force. Recommended solder: Sn63 (Leaded solder alloy) SAC305 (Lead free solder alloy) 100 Flux: Rosin flux Solder bath temperature: 245C 5C (maximum peak temperature = 250C) 50 PREHEAT Dwell time: 1.5 sec - 3.0 sec (maximum = 3 sec) 0 Broadcom 10 20 30 40 50 60 TIME (SECONDS) 70 80 90 100 Note: Allow for board to be sufficiently cooled to room temperature before exerting mechanical force. AV02-1556EN 14 Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, and the A logo are among the trademarks of Broadcom and/or its affiliates in the United States, certain other countries and/or the EU. Copyright (c) 2015-2017 by Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Limited and/or its subsidiaries. For more information, please visit www.broadcom.com. Broadcom reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design. Information furnished by Broadcom is believed to be accurate and reliable. However, Broadcom does not assume any liability arising out of the application or use of this information, nor the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.