Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi1-EH04-AP6X-V1331 o4 25 o 6,5 42,5 smooth barrel, 4 mm diameter stainless steel 1.4301 3-wire DC, 10...30 VDC normally open pnp output connector, M8 x 1 Wiring diagram LED M8 x 1 pnp Type Ident-No. Bi1-EH04-AP6X-V1331 4608440 Rated operating distance Sn Mounting mode Hysteresis (switching distance) Min. repeat accuracy Temperature drift Operating temperature 1 mm flush 3... 15 % 2 % 10 % -25 ...+ 70 C Rated operational voltage (DC) UB 10... 30 VDC Max. ripple 10 % Upp Rated operational current (DC) Ie 100 mA No-load current I0 15 mA Max. OFF-state current Max. switching frequency Rated insulation voltage Output function Short-circuit protection Max. voltage drop at Ie 0,1 mA 3 kHz 0,5 kV 3-wire, normally open, PNP yes, cyclic 1,8 V Wire breakage / reverse polarity protection yes / complete Housing style Dimensions Housing material Active face Wiring Vibration resistance Shock resistance Degree of protection smooth barrel; 4 mm 42,5 mm metal, A2 1.4301 (AISI 304) plastic, PA12-GF20 connector, M8 x 1 55 Hz (1 mm) 30 x g (11 ms) IP67 Switching status indication LED yellow 1 BN + 3 BU 4 BK 4 BK 1 BN 3 BU Function principles Inductive proximity switches are designed for wear-free non-contact detection of metal objects. For this they use a high-frequency electro-magnetic AC field that interacts with the target. With inductive sensors, this field is generated by an LC resonant circuit with a ferrite core coil. Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi1-EH04-AP6X-V1331 Mounting instructions Gap D Gap W Gap T Gap S Gap G minimum gap 2xB 3 x Sn 3xB 1,5 x B 6 x Sn Diameter of active face B O 4 mm G S D T W Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi1-EH04-AP6X-V1331 Accessories Typ BS540 IdentNo. 69475 Description Dimension drawing fixing clamp; material mounting block: anodized aluminium; clamp sleeve: steel 11 o4 M3 20 6,5 25 5 M2 x 4 DIN 963 MBS40 69477 fixing clamp; material mounting block: anodized aluminium o 3,2 3,75 7,5 12 M3 x 8 DIN 912 S 2,5 o4 20 16 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264