6
.100" x .200" SERIES 6352
#
CONTACTS ABCDEG
±.010 ±.005 ±.005 ±.005 ±.005 ±.007
±[0,25] [0,13] [0,13] [0,13] [0,13] [0,18]
1.435 1.175 0.860 0.700 0.500 0.750
12 [36,45] [29,85] [21,84] [17,78] [12,70] [19,05]
1.835 1.575 1.260 1.100 0.900 1.150
20 [40,61] [40,01] [32,00] [27,94] [22,86] [29,21]
2.835 2.575 2.260 2.100 1.900 2.150
40 [72,01] [65,41] [57,40] [53,34] [48,26] [54,61]
3.035 2.775 2.460 2.300 2.100 2.350
44 [77,09] [70,49] [62,48] [58,42] [53,34] [59,69]
3.335 3.075 2.760 2.600 2.400 2.650
50 [84,71] [78,11] [70,10] [66,04] [60,96] [67,31]
3.635 3.375 3.060 2.900 2.700 2.950
56 [92,33] [85,73] [77,72] [73,66] [68,58] [74,93]
3.835 3.575 3.260 3.100 2.900 3.150
60 [97,41] [90,81] [82,80] [78,74] [73,66] [80,10]
4.335 4.075 3.760 3.600 3.400 3.650
70 [110,11] [103,51] [95,50] [91,44] [86,36] [92,71]
4.435 4.175 3.860 3.700 3.500 3.750
72 [112,65] [106,05] [98,04] [93,98] [88,90] [95,25]
4.835 4.575 4.260 4.100 3.900 4.150
80 [122,81] [116,21] [108,20] [104,14] [99,06] [105,41]
5.135 4.875 4.560 4.400 4.200 4.450
86 [130,43] [123,83] [115,82] [111,76] [106,68] [113,03]
5.835 5.575 5.260 5.100 4.900 5.150
100 [148,21] [141,61] [133,60] [129,54] [124,46] [130,81]
Inches [mm] Consult factory for other sizes
Rectangular Tails
Features
.100" by .200" contact
centers
Cantilevered contacts
Dual read-out connector
on sizes 12 through 140
contacts
Three insulator mounting
configurations
Selective gold over nickel
plating
Available as discrete
connector
7
.100" x .200" SERIES 6352
PC CARD LAYOUT
Specifications
Insertion / Withdrawal Force:
8 to 16 ounces per contact pair
Contact Resistance:
10 milliohms maximum
Insulation Resistance:
5000 megohms minimum
at 500 VDC
Dielectric Withstanding Voltage:
≥1500 VAC, rms, at sea level
Current Rating: 3 amps maximum
Operating Temperature:
-65°C to + 125°C
Insulator Specifications
Material:
94 V-O glass-filled polyester, black
Positions: Dual readout.
Even numbers only,
12 through 140 contacts
Mounting Configurations:
Center mount, with .128"
diameter mounting holes
Flush mount, with .128"
diameter mounting holes
No mounting ears
Contact Specifications
Material: Phosphor bronze
Type: Cantilever
Termination Style: Solder
Tail Length: .205"
Standard Plating:
mating area: 10 microinches gold
tail: 75-175 tin-lead
(Remainder bare nickel under
plating of 50-150 microinches nickel.)
Ordering Code
Typical Example 00 6352 100 257 861
SERIES
NUMBER OF CONTACTS
CONTACT CODE
257 P. C. solder tail length .205" (.010" x .025")
VARIATION CODE
DUAL READ-OUT
See chart on page 6
for available sizes
VARIATION 861 VARIATION 863 VARIATION 865
Center Mounting
.128 Dia. Mounting Holes
