105MMR400K GENERAL PURPOSE FILM Parts are RoHS compliant ELECTRICAL SPECIFICATIONS Capacitance: 1 uF Tolerance: -10 % , +10 % Dissipation Factor: 0.01 Max at 1000 Hz and 25C Temperature Range: -40C to +105C Temperature Coefficient: 400 PPM/*C: -200 PPM/C, 200 PPM/*C Above 35C the rated (DC/AC) voltage must be derated at per 1.2590/2.25%C Ripple Current: at and WvDC: 400 Volts DC ESR: - at - and - SVDC: N/A Volts DC Self Inductance: 1 Nanohenries maximum per mm of pitch VAC: 200 Volts AC dvdt: 30 V/s Terminal to Terminal Dielectric strength: 1.5 times the rated DC voltage when Terminal to case Dielectric strength: 0 VAC when applied between the applied between the terminals for 60 seconds terminals and case for 0 seconds Insulation Resistance (Terminal to Terminal): 3000 MINIMUM after 100 Volts Insulation resistance (Terminal to Case): N/A Megohms MINIMUM after 0 Volts DC is applied for 60 seconds at 20C DC is applied for 0 seconds at 0 Reliability: Load Life: 2000 hours at 65C with 125% of rated voltage Capacitance Change: <5% of initially measured value D.F. Change: <50% of maximum specified value LR. Change: =50% of minimum specified value PHYSICAL DIMENSIONS Length (L): 26 mm, MAX mm Lead Spacing (5): 22.5 mm, +/-1 mm Height (H): 18 mm, +/-MAX mm Lead Diameter (d): 0.6 mm, +/-0.05 mm Thickness (T): 8.5 mm, +/-MAX mm Lead Length (LL): 15mm, +/- MIN mm T G Max d yn a 2400 East Devon Avenue Suite 292 Des Plaines, IL 60018 (847) 675-1760 FAX (847) 673-2850 4 Jos CAPACITOR illinois Capacitor (HK) Ltd., Tel: 85227930931, Fax: 85227930731, www illeap com hk Copyright 2020 Illinois Capacitor. An affiliate of Cornell Dubilier, All Rights Reserved