VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.
www.vishay.com Vishay Semiconductors
Rev. 1.7, 07-Aug-12 1Document Number: 84789
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Standard SMD LED PLCC-2
DESCRIPTION
These devices have been designed to meet the increasing
demand for surface mounting technology.
The package of the VLM.310. is the PLCC-2.
It consists of a lead frame which is embedded in a white
thermoplast. The reflector inside this package is filled up
with clear epoxy.
PRODUCT GROUP AND PACKAGE DATA
• Product group: LED
• Package: SMD PLCC-2
• Product series: standard
• Angle of half intensity: ± 60°
FEATURES
• SMD LEDs with exceptional brightness
• Luminous intensity categorized
• Compatible with automatic placement
equipment
• EIA and ICE standard package
• Compatible with infrared, vapor phase and
wave solder processes according to
CECC 00802 and J-STD-020
• Available in 8 mm tape
• Low profile package
• Non-diffused lens: excellent for coupling to light pipes and
backlighting
• Low power consumption
• Luminous intensity ratio in one packaging unit
IVmax./IVmin. ≤ 1.6
• Preconditioning: acc. to JEDEC level 2a
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive: backlighting in dashboards, and switches
• Telecommunication: indicator and backlighting in
telephone and fax
• Indicator and backlight for audio and video equipment
• Indicator and backlight in office equipment
• Flat backlight for LCDs, switches, and symbols
• General use
94 8553
PARTS TABLE
PART COLOR
LUMINOUS INTENSITY
(mcd) at IF
(mA)
WAVELENGTH
(nm)
FORWARD VOLTAGE
(V) at IF
(mA) TECHNOLOGY
MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
VLMH3100-GS08 Amber 2.8 10 - 10 612 - 625 - 2 2.8 20 GaAsP on GaP
VLMH3100-GS18 Amber 2.8 10 - 10 612 - 625 - 2 2.8 20 GaAsP on GaP
VLMH3101-GS08 Amber 4.5 - 11.2 10 612 - 625 - 2 2.8 20 GaAsP on GaP
VLMH3101-GS18 Amber 4.5 - 11.2 10 612 - 625 - 2 2.8 20 GaAsP on GaP
VLMH3102-GS08 Amber 7.1 - 18 10 612 - 625 - 2 2.8 20 GaAsP on GaP
VLMH3102-GS18 Amber 7.1 - 18 10 612 - 625 - 2 2.8 20 GaAsP on GaP
VLMO3100-GS08 Soft orange 2.8 8 - 10 598 - 611 - 2 2.8 20 GaAsP on GaP
VLMO3100-GS18 Soft orange 2.8 8 - 10 598 - 611 - 2 2.8 20 GaAsP on GaP
VLMO3101-GS08 Soft orange 4.5 - 11.2 10 598 - 611 - 2 2.8 20 GaAsP on GaP
VLMO3101-GS18 Soft orange 4.5 - 11.2 10 598 - 611 - 2 2.8 20 GaAsP on GaP
VLMY3100-GS08 Yellow 2.8 10 10 581 - 594 - 2.1 2.8 20 GaAsP on GaP
VLMY3100-GS18 Yellow 2.8 10 10 581 - 594 - 2.1 2.8 20 GaAsP on GaP
VLMY3101-GS08 Yellow 4.5 - 11.2 10 581 - 594 - 2.1 2.8 20 GaAsP on GaP
VLMY3101-GS18 Yellow 4.5 - 11.2 10 581 - 594 - 2.1 2.8 20 GaAsP on GaP
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.
www.vishay.com Vishay Semiconductors
Rev. 1.7, 07-Aug-12 2Document Number: 84789
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) In one packing unit IVmax./IVmin. ≤ 1.6
VLMY3102-GS08 Yellow 7.1 - 18 10 581 - 594 - 2.1 2.8 20 GaAsP on GaP
VLMY3102-GS18 Yellow 7.1 - 18 10 581 - 594 - 2.1 2.8 20 GaAsP on GaP
VLMG3100-GS08 Green 4.5 16 - 10 562 - 575 - 2.2 2.8 20 GaP on GaP
VLMG3100-GS18 Green 4.5 16 - 10 562 - 575 - 2.2 2.8 20 GaP on GaP
VLMG3102-GS08 Green 11.2 - 18 10 562 - 575 - 2.2 2.8 20 GaP on GaP
VLMG3102-GS18 Green 11.2 - 18 10 562 - 575 - 2.2 2.8 20 GaP on GaP
VLMG3105-GS08 Green 7.1 - 18 10 562 - 575 - 2.2 2.8 20 GaP on GaP
VLMG3105-GS18 Green 7.1 - 18 10 562 - 575 - 2.2 2.8 20 GaP on GaP
VLMP3100-GS08 Pure green 1.12 4 - 10 555 - 565 - 2.1 2.8 20 GaP on GaP
VLMP3100-GS18 Pure green 1.12 4 - 10 555 - 565 - 2.1 2.8 20 GaP on GaP
VLMP3101-GS08 Pure green 1.8 - 4.5 10 555 - 565 - 2.1 2.8 20 GaP on GaP
VLMP3101-GS18 Pure green 1.8 - 4.5 10 555 - 565 - 2.1 2.8 20 GaP on GaP
VLMP3107-GS08 Pure green 2.8 - 7.1 10 555 - 565 - 2.1 2.8 20 GaP on GaP
VLMP3107-GS18 Pure green 2.8 - 7.1 10 555 - 565 - 2.1 2.8 20 GaP on GaP
VLMP3102-GS08 Pure green 2.8 - 5.6 10 555 - 565 - 2.1 2.8 20 GaP on GaP
VLMP3102-GS18 Pure green 2.8 - 5.6 10 555 - 565 - 2.1 2.8 20 GaP on GaP
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
VLMG310. ,VLMH310. ,VLMO310. ,VLMP310. ,VLMY310.
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
Reverse voltage VR6V
DC forward current Tamb ≤ 60 °C IF30 mA
Surge forward current tp ≤ 10 ∝sI
FSM 0.5 A
Power dissipation Tamb ≤ 60 °C PV100 mW
Junction temperature Tj100 °C
Operating temperature range Tamb - 40 to + 100 °C
Storage temperature range Tstg - 40 to + 100 °C
Soldering temperature t ≤ 5 s Tsd 260 °C
Thermal resistance junction/ambient Mounted on PC board (pad size > 16 mm2)R
thJA 400 K/W
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
VLMH310., AMBER
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity (1) IF = 10 mA
VLMH3100 IV2.8 10 - mcd
VLMH3101 IV4.5 - 11.2 mcd
VLMH3102 IV7.1 - 18 mcd
Dominant wavelength IF = 10 mA λd612 - 625 nm
Peak wavelength IF = 10 mA λp- 635 - nm
Angle of half intensity IF = 10 mA ϕ-± 60- deg
Forward voltage IF = 20 mA VF-22.8V
Reverse voltage IR = 10 μA VR615- V
Junction capacitance VR = 0 V, f = 1 MHz Cj-15-pF
PARTS TABLE
PART COLOR
LUMINOUS INTENSITY
(mcd) at IF
(mA)
WAVELENGTH
(nm)
FORWARD VOLTAGE
(V) at IF
(mA) TECHNOLOGY
MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.
www.vishay.com Vishay Semiconductors
Rev. 1.7, 07-Aug-12 3Document Number: 84789
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) In one packing unit IVmax./IVmin. ≤ 1.6
Note
(1) In one packing unit IVmax./IVmin. ≤ 1.6
Note
(1) In one packing unit IVmax./IVmin. ≤ 1.6
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
VLMO310., SOFT ORANGE
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity (1) IF = 10 mA VLMO3100 IV2.8 8 - mcd
VLMO3101 IV4.5 - 11.2 mcd
Dominant wavelength IF = 10 mA λd598 - 611 nm
Peak wavelength IF = 10 mA λp- 605 - nm
Angle of half intensity IF = 10 mA ϕ-± 60- deg
Forward voltage IF = 20 mA VF-22.8V
Reverse voltage IR = 10 ∝AV
R615- V
Junction capacitance VR = 0 V, f = 1 MHz Cj-15-pF
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
VLMY310., YELLOW
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity (1) IF = 10 mA
VLMY3100 IV2.8 10 mcd
VLMY3101 IV4.5 - 11.2 mcd
VLMY3102 IV7.1 - 18 mcd
Dominant wavelength IF = 10 mA λd581 - 594 nm
Peak wavelength IF = 10 mA λp- 585 - nm
Angle of half intensity IΦ = 10 mA ϕ-± 60- deg
Forward voltage IF = 20 mA VF-2.12.8V
Reverse voltage IR = 10 μA VR615- V
Junction capacitance VR = 0 V, f = 1 MHz Cj-15-pF
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
VLMG310., GREEN
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity (1) IF = 10 mA
VLMG3100 IV4.5 16 - mcd
VLMG3102 IV11.2 - 18 mcd
VLMG3105 IV7.1 - 18 mcd
Dominant wavelength IF = 10 mA λd562 - 575 nm
Peak wavelength IF = 10 mA λp- 565 - nm
Angle of half intensity IF = 10 mA ϕ-± 60- deg
Forward voltage IF = 20 mA VF-2.22.8V
Reverse voltage IR = 10 ∝AV
R615- V
Junction capacitance VR = 0 V, f = 1 MHz - - 15 - pF
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.
www.vishay.com Vishay Semiconductors
Rev. 1.7, 07-Aug-12 4Document Number: 84789
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) In one packing unit IVmax./IVmin. ≤ 1.6
Note
• Wavelengths are tested at a current pulse duration of 25 ms.
Note
• Luminous intensity is tested at a current pulse duration of 25 ms
and an accuracy of ± 11 %.
The above type numbers represent the order groups which
include only a few brightness groups. Only one group will be
shipped on each reel (there will be no mixing of two groups on
each reel).
In order to ensure availability, single brightness groups will not
be orderable.
In a similar manner for colors where wavelength groups are
measured and binned, single wavelength groups will be shipped
on any one reel.
In order to ensure availability, single wavelength groups will not
be orderable.
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
VLMP310., PURE GREEN
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity (1) IF = 10 mA
VLMP3100 IV1.12 4 - mcd
VLMP3101 IV1.8 - 4.5 mcd
VLMP3102 IV2.8 - 7.1 mcd
VLMP3107 IV2.8 - 5.6 mcd
Dominant wavelength IF = 10 mA λd555 - 565 nm
Peak wavelength IF = 10 mA λp- 555 - nm
Angle of half intensity IF = 10 mA ϕ-± 60- deg
Forward voltage IF = 20 mA VF-2.12.8V
Reverse voltage IR = 10 ∝AV
R615- V
Junction capacitance VR = 0 V, f = 1 MHz Cj-15-pF
COLOR CALSSIFICATION
GROUP
YELLOW GREEN SOFT ORANGE PURE GREEN
DOM. WAVELENGTH (nm) DOM. WAVELENGTH (nm)
MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.
0555 559
1 581 584 598 601 558 561
2 583 586 600 603 560 563
3 585 588 602 605 562 565
4 587 590 564 567 604 607
5 589 592 566 569 606 609
6 591 594 568 571 608 611
7 570 573
8 572 575
LUMINOUS INTENSITY CLASSIFICATION
GROUP LIGHT INTENSITY (mcd)
STANDARD OPTIONAL MIN. MAX.
F---
2 1.40 1.80
G1 1.80 2.24
2 2.24 2.80
H1 2.80 3.55
2 3.55 4.50
J1 4.50 5.60
2 5.60 7.10
K1 7.10 9.00
2 9.00 11.20
L1 11.20 14.00
2 14.00 18.00
M1 18.00 22.40
2 22.40 28.00
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.
www.vishay.com Vishay Semiconductors
Rev. 1.7, 07-Aug-12 5Document Number: 84789
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 1 - Maximum Permissible Forward Current vs.
Ambient Temperature
Fig. 2 - Permissible Pulse Forward Current vs. Pulse Duration
Fig. 3 - Relative Luminous Intensity vs. Angular Displacement
Fig. 4 - Forward Current vs. Forward Voltage
CROSSING TABLE
VISHAY OSRAM STANLEY
VLMH3100 - -
VLMH3101 - -
VLMH3102 - -
VLMO3100 LOT670J1L2 -
VLMO3101 LOT670J1K2 -
VLMY3100 LYT670J1L2 -
VLMY3101 LYT670J1K2 -
VLMY3102 LYT670K1L2 -
VLMG3100 LGT670K1M2 VYBG1104B
VLMG3102 LGT670L1L2 -
VLMG3105 LGT671K1L2 -
VLMP3100 LPT670F2J2 -
VLMP3101 LPT670G1H2 VYBG1101W
VLMP3102 LPT670H1J2 -
VLMP3107 LPT670H1J1 -
0
10
20
30
40
60
I
F
- Forward Current (mA)
95 10905
50
T
amb
- Ambient Temperature (°C)
100806040200
0.01 0.1 1 10
1
10
100
1000
10 000
tp - Pulse Length (ms)
100
95 9985
IF - Forward Current (mA)
DC
t
p
/T = 0.005
0.5
0.2
0.1
0.01
0.05
0.02
T
amb
< 60 °C
0.4 0.2 0
95 10319
0.6
0.9
0.8
0°
30°
10° 20°
40°
50°
60°
70°
80°
0.7
1.0
I
V rel
- Relative Luminous Intensity
ϕ - Angular Displacement
0.1
1
10
100
V
F
- Forward Voltage (V)
5432
I
F
- Forward Current (mA)
Amber
10
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.
www.vishay.com Vishay Semiconductors
Rev. 1.7, 07-Aug-12 6Document Number: 84789
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature
Fig. 6 - Specific Luminous Intensity vs. Forward Current/Duty Cycle
Fig. 7 - Relative Luminous Intensity vs. Forward Current
Fig. 8 - Relative Intensity vs. Wavelength
Fig. 9 - Forward Current vs. Forward Voltage
Fig. 10 - Relative Luminous Intensity vs. Ambient Temperature
0
0.4
0.8
1.2
1.6
2.0
100
I
V rel
- Relative Luminous Intensity
T
amb
- Ambient Temperature (°C)
020406080
Amber
10 20 50 100 200
0
0.4
0.8
1.2
1.6
2.4
500
0.5 0.2 0.1 0.05 0.021
IF (mA)
tp
/T
2.0
Ispec - Specific Luminous Intensity
Amber
0.01
0.1
1
10
IF - Forward Current (mA)
100101
IV rel - Relative Luminous Intensity
Amber
590 610 630 650 670
0
0.2
0.4
0.6
0.8
1.2
690
λ - Wavelength (nm)
1.0
I rel - Relative Intensity
Amber
0.1
1
10
100
95 9990
I - Forward Current (mA)
F
soft orange
VF- Forward Voltage (V)
543210
95 9994
soft orange
0
0.4
0.8
1.2
1.6
2.0
100
IV rel - Relative Luminous Intensity
Tamb - Ambient Temperature (°C)
020406080
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.
www.vishay.com Vishay Semiconductors
Rev. 1.7, 07-Aug-12 7Document Number: 84789
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 11 - Specific Luminous Intensity vs. Forward Current/Duty
Cycle
Fig. 12 - Relative Luminous Intensity vs. Forward Current
Fig. 13 - Relative Intensity vs. Wavelength
Fig. 14 - Forward Current vs. Forward Voltage
Fig. 15 - Relative Luminous Intensity vs. Ambient Temperature
Fig. 16 - Specific Luminous Intensity vs. Forward Current/Duty
Cycle
95 10259
soft orange
10 20 50 100 200
0
0.4
0.8
1.2
1.6
2.4
500
0.5 0.2 0.1 0.05 0.021
I
F
(mA)
t
p
/T
2.0
I
spec
- Specific Luminous Intensity
0.01
0.1
1
10 1001
10
I
F - Forward Current (mA)
95 9997
I - Relative Luminous Intensity
v rel
soft orange
95 10324
soft orange
570 590 610 630 650
0
0.2
0.4
0.6
0.8
1.2
670
λ - Wavelength (nm)
1.0
Irel - Relative Intensity
yellow
0.1
1
10
100
95 9987 V
F
- Forward Voltage (V)
I- Forward Current (mA)
F
521034
yellow
0
0.4
0.8
1.6
1.2
2.0
95 9992
I- Relative Luminous Intensity
v rel
T
amb
- Ambient Temperature (°C)
20 40 60 800 100
yellow
10 20 50 100 200
0
0.4
0.8
1.2
1.6
2.4
95 10260
500
0.5 0.2 0.1 0.05 0.021
I
F
(mA)
t
p
/T
Ispec - Specific Luminous Intensity
2.0
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.
www.vishay.com Vishay Semiconductors
Rev. 1.7, 07-Aug-12 8Document Number: 84789
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 17 - Relative Luminous Intensity vs. Forward Current
Fig. 18 - Relative Intensity vs. Wavelength
Fig. 19 - Forward Current vs. Forward Voltage
Fig. 20 - Relative Luminous Intensity vs. Ambient Temperature
Fig. 21 - Specific Luminous Intensity vs. Forward Current
Fig. 22 - Relative Luminous Intensity vs. Forward Current
550 570 590 610 630
0
0.2
0.4
0.6
0.8
1.2
650
95 10039
λ - Wavelength (nm)
1.0
yellow
I
rel
- Relative Intensity
green
0.1
1
10
100
V
F - Forward Voltage (V)
I- Forward Current (mA)
F
52103
95 9986
4
green
0
0.4
0.8
1.6
1.2
2.0
95 10320
I- Relative Luminous Intensity
v rel
Tamb - Ambient Temperature (°C)
20 40 60 800 100
10 20 50 100 200
0
0.4
0.8
1.2
1.6
2.4
95 10263
500
2.0
green
Ispec - Specific Luminous Intensity
IF (mA)
0.5 0.2 0.1 0.05 0.021 tp/T
green
I
F - Forward Current (mA)
100
0.01
0.1
1
10
95 9996
I- Relative Luminous Intensity
v rel
101
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.
www.vishay.com Vishay Semiconductors
Rev. 1.7, 07-Aug-12 9Document Number: 84789
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 23 - Relative Intensity vs. Wavelength
Fig. 24 - Forward Current vs. Forward Voltage
Fig. 25 - Relative Luminous Intensity vs. Ambient Temperature
Fig. 26 - Specific Luminous Intensity vs. Forward Current
Fig. 27 - Relative Luminous Intensity vs. Forward Current
Fig. 28 - Relative Intensity vs. Wavelength
520 540 560 580 600
0
0.2
0.4
0.6
0.8
1.2
620
95 10038 λ - Wavelength (nm)
1.0
green
Irel - Relative Intensity
02
0.1
1
10
100
5
95 9988
pure green
I
F
- Forward Current (mA)
V
F
- Forward Voltage (V)
13
4
0
0.4
0.8
1.2
1.6
2.0
95 9991
pure green
I
V rel
- Relative Luminous Intensity
T
amb
- Ambient Temperature (°C)
010080604020
95 10261
10 1000100
0
0.4
0.8
1.2
1.6
2.4
2.0
pure green
I
Spec
- Specific Luminous Flux
I
F
- Forward Current (mA)
0.01
0.1
1
10
100101
95 9998
pure green
IV rel - Relative Luminous Intensity
IF - Forward Current (mA)
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.
www.vishay.com Vishay Semiconductors
Rev. 1.7, 07-Aug-12 10 Document Number: 84789
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters
METHOD OF TAPING/POLARITY AND TAPE AND REEL
SMD LED (VLM3-SERIES)
Vishay’s LEDs in SMD packages are available in an
antistatic 8 mm blister tape (in accordance with DIN IEC
40 (CO) 564) for automatic component insertion. The blister
tape is a plastic strip with impressed component cavities,
covered by a top tape.
TAPING OF VLM.3..
Fig. 29 - Tape Dimensions in mm for PLCC-2
20541
Mounting Pad Layout
1.2
2.6 (2.8)
1.6 (1.9)
4
4
area covered with
solder resist
3.5 ± 0.2
3 + 0.15
1.75 ± 0.1
0.9
2.8 ± 0.15
CA
Pin identification
2.2
Ø 2.4
technical drawings
according to DIN
specifications
Drawing-No.: 6.541-5067.01-4
Issue: 5; 04.11.08
Adhesive tape
Component cavity
Blister tape
94 8670
1.85
1.65
4.0
3.6
3.6
3.4
2.05
1.95
1.6
1.4
4.1
3.9
4.1
3.9
5.75
5.25
8.3
7.7
3.5
3.1
2.2
2.0
0.25
94 8668
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.
www.vishay.com Vishay Semiconductors
Rev. 1.7, 07-Aug-12 11 Document Number: 84789
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
REEL PACKAGE DIMENSION IN MILLIMETERS
FOR SMD LEDS, TAPE OPTION GS08
(= 1500 PCS.)
Fig. 30 - Reel Dimensions - GS08
REEL PACKAGE DIMENSION IN MILLIMETERS
FOR SMD LEDS, TAPE OPTION GS18
(= 8000 PCS.) PREFERRED
Fig. 31 - Reel Dimensions - GS18
SOLDERING PROFILE
Fig. 32 - Vishay Lead (Pb)-free Reflow Soldering Profile
(acc. to J-STD-020)
Fig. 33 - Double Wave Soldering of Opto Devices (all Packages)
180
178
4.5
3.5
2.5
1.5
13.00
12.75
63.5
60.5
14.4 max.
10.0
9.0
120°
94 8665
Identification
Label:
Vishay
type
group
tape code
production
code
quantity
321
329
Identification
4.5
3.5
2.5
1.5
13.00
12.75
62.5
60.0
14.4 max.
10.4
8.4
120°
18857
Label:
Vishay
type
group
tape code
production
code
quantity
0
50
100
150
200
250
300
0 50 100 150 200 250 300
Time (s)
Temperature (°C)
240 °C 245 °C
max. 260 °C
max. 120 s max. 100 s
217 °C
max. 30 s
max. ramp up 3 °C/s max. ramp down 6 °C/s
19885
IR Reflow Soldering Profile for Lead (Pb)-free Soldering
Preconditioning acc. to JEDEC level 2a
max. 2 cycles allowed
255 °C
235 °C
to 260 °C
2 K/s
ca. 200 K/s
second
wave
first wave
5 s
full line: typical
dotted line: process limits
Time (s)
Temperature (°C)
lead temperature
300
250
200
150
100
50
0
0 50 100 150 200 250
948626-1
TTW Soldering (acc. to CECC00802)
100 °C
to 130 °C
forced cooling
ca. 2 K/s
ca. 5 K/s
VLMH310., VLMO310., VLMY310., VLMG310., VLMP310.
www.vishay.com Vishay Semiconductors
Rev. 1.7, 07-Aug-12 12 Document Number: 84789
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BAR CODE PRODUCT LABEL (example)
A) Type of component
B) Manufacturing plant
C) SEL - selection code (bin):
e.g.: K1= code for luminous intensity group
4= code for color group
D) Date code year/week
E) Day code (e.g. 2: Tuesday)
F) Batch no.
G) Total quantity
H) Company code
DRY PACKING
The reel is packed in an anti-humidity bag to protect the
devices from absorbing moisture during transportation and
storage.
FINAL PACKING
The sealed reel is packed into a cardboard box. A secondary
cardboard box is used for shipping purposes.
RECOMMENDED METHOD OF STORAGE
Dry box storage is recommended as soon as the aluminum
bag has been opened to prevent moisture absorption. The
following conditions should be observed, if dry boxes are
not available:
• Storage temperature 10 °C to 30 °C
• Storage humidity ≤ 60 % RH max.
After more than 672 h under these conditions moisture
content will be too high for reflow soldering.
In case of moisture absorption, the devices will recover to
the former condition by drying under the following condition:
192 h at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen)
or
96 h at 60 °C + 5 °C and < 5 % RH for all device containers
or
24 h at 100 °C + 5 °C not suitable for reel or tubes.
An EIA JEDEC standard JESD22-A112 level 2a label is
included on all dry bags.
Example of JESD22-A112 level 2a label
ESD PRECAUTION
Proper storage and handling procedures should be followed
to prevent ESD damage to the devices especially when they
are removed from the antistatic shielding bag. Electro-static
sensitive devices warning labels are on the packaging.
VISHAY SEMICONDUCTORS STANDARD
BAR CODE LABELS
The Vishay Semiconductors standard bar code labels are
printed at final packing areas. The labels are on each
packing unit and contain Vishay Semiconductors specific
data.
106
37
VISHAY
A
H
BC D E F G 19788
Aluminum bag
Label
Reel
15973
L E V E L
CAUTION
This bag contains
MOISTURE –SENSITIVE DEVICES
1. Shelf life in sealed bag 12 months at <40°C and < 90% relative humidity (RH)
2. After this bag is opened devices that will be subjected to infrared reflow,
vapor-phase reflow, or equivalent processing (peak package body temp.
260°C) must be:
a) Mounted within
672 hours at factory condition of < 30°C/60%RH or
b) Stored at <10% RH.
3. Devices require baking before mounting if:
a) Humidity Indicator Card is >10% when read at 23°C + 5°C or
b) 2a or 2b is not met.
4. If baking is required, devices may be baked for:
192 hours at 40°C + 5°C/-0°C and <5%RH (dry air/nitrogen) or
96 hours at 60±5
o
Cand <5%RH For all device containers or
24 hours at 100±5°C Not suitable for reels or tubes
Bag Seal Date: ______________________________
(If blank, see bar code label)
Note: LEVEL defined by EIA JEDEC Standard JESD22-A113
2a
19786
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.