1285AS-H-1R0M# "#" indicates a package specification code. < List of part numbers with package codes > 1285AS-H-1R0M=P2 Shape Notes Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40C by DC current. References Packaging code =P2 L size 2.0 0.2mm W size 1.6 0.2mm T size 1.0 mm Size code in inch (mm) 0806 (2016) Specifications 180mm Embossed taping Minimum quantity 3000 Mass (Typ.) 1 piece 0.015g Specifications Inductance 1.0H 20% Inductance test frequency 1MHz Rated current (Isat) (Based on Inductance change) 2200mA Rated current (Itemp) (Based on Temperature rise) 2000mA Max. of DC resistance 0.096 Operating temperature range (Self-temperature rise is included) -40 to 85 Class of magnetic shield Metal Alloy Absolute maximum voltage 20V DC Series DFE201610C 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : https://www.murata.com/ Last updated: 2019/05/04 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) 2 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2019/05/04