Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Vertical Header Assemblies A Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Single Row, Through-Hole, with Retention Feature on Soldertail and Polarization Feature to PCB .051 [1.30] .364 [9.24] Ref. .125 [3.18] Ref. Circuit 1 .152 [3.86] .020 [0.51] Material and Finish Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Contacts -- Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Related Product Data Mateable Housings: Single Row Receptacle Housings-- page 23 .031 [0.80] Dia. Ref. .118 [3.00] Typ. C .118 [3.00] Typ. .077 [1.96] .040 [1.02] Dia. Typ. Circuit 1 .118 [3.00] .050 [1.27] Dia. 2 Plc. B Recommended PC Board Layout* Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 Dimensions Header Part Numbers A B C .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 .360 9.14 .478 12.14 .596 15.14 .714 18.14 .832 21.14 .950 24.14 1.069 27.14 1.187 30.14 1.304 33.14 1.423 36.14 1.541 39.14 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 Plating A Plating B Plating C Mates with Receptacle Housing Part Number 2-1445050-2 2-1445084-2 2-1445093-2 1445022-2 2-1445050-3 2-1445084-3 2-1445093-3 1445022-3 2-1445050-4 2-1445084-4 2-1445093-4 1445022-4 2-1445050-5 2-1445084-5 2-1445093-5 1445022-5 2-1445050-6 2-1445084-6 2-1445093-6 1445022-6 2-1445050-7 2-1445084-7 2-1445093-7 1445022-7 2-1445050-8 2-1445084-8 2-1445093-8 1445022-8 2-1445050-9 2-1445084-9 3-1445093-9 1445022-9 3-1445050-0 3-1445084-0 3-1445093-0 1-1445022-0 3-1445050-1 3-1445084-1 3-1445093-1 1-1445022-1 3-1445050-2 3-1445084-2 3-1445093-2 1-1445022-2 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 30 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) High Density Vertical Header Assemblies (Continued) .364 [9.24] Ref. A .051 [1.30] .125 [3.18] Ref. Single Row, Through-Hole, with Metal Through-Hole Hold-down Contact Circuit 1 .152 [3.86] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Hold-down .020 [0.51] Material and Finish Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel .118 [3.00] Ref. C .085 [2.15] .095 Dia. [2.41] 2 Plc. Related Product Data Mateable Housings: B Single Row Receptacle Housing-- page 23 Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 .040 [1.02] Dia. Typ. .118 [3.00] Typ. Recommended PC Board Layout* Dimensions Header Part Numbers A B C .399 10.14 .517 13.14 .635 16.14 .754 19.14 .871 22.14 .990 25.14 1.108 28.14 1.226 31.14 1.344 34.14 1.462 37.14 1.580 40.14 .293 7.43 .411 10.43 .529 13.43 .647 16.43 .765 19.43 .883 22.43 1.001 25.43 1.119 28.43 1.237 31.43 1.356 34.43 1.474 37.43 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 Plating A Plating B Plating C Mates with Receptacle Housing Part Number 2-1445051-2 2-1445085-2 2-1445094-2 1445022-2 2-1445051-3 2-1445085-3 2-1445094-3 1445022-3 2-1445051-4 2-1445085-4 2-1445094-4 1445022-4 2-1445051-5 2-1445085-5 2-1445094-5 1445022-5 2-1445051-6 2-1445085-6 2-1445094-6 1445022-6 2-1445051-7 2-1445085-7 2-1445094-7 1445022-7 2-1445051-8 2-1445085-8 2-1445094-8 1445022-8 2-1445051-9 2-1445085-9 2-1445094-9 1445022-9 3-1445051-0 3-1445085-0 3-1445094-0 1-1445022-0 3-1445051-1 3-1445085-1 3-1445094-1 1-1445022-1 3-1445051-2 3-1445085-2 3-1445094-2 1-1445022-2 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 31 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) Vertical Header Assemblies .364 [9.24] Ref. (Continued) Single Row, Surface Mount, with Metal Through-Hole Hold-down .236 [6.00] Dia. .118 [3.00] Ref. .051 [1.30] Contact .113 [2.88] Ref. .156 [3.97] Ref. Circuit 1 Material and Finish Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 .152 [3.86] A .010 [0.25] Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Single Row Receptacle Housing-- page 23 C .050 [1.27] Typ. Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Related Product Data Mateable Housings: Hold-down .020 [0.51] Circuit 1 .118 [3.00] Typ. .100 [2.54] .126 [3.20] .095 [2.41] Dia. 2 Plc. .085 [2.15] B Recommended PC Board Layout* Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 Dimensions Header Part Numbers A B C .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 .293 7.43 .411 10.43 .529 13.43 .647 16.43 .765 19.43 .883 22.43 1.001 25.43 1.119 28.43 1.237 31.43 1.356 34.43 1.474 37.43 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 Plating A Plating B Plating C Mates with Receptacle Housing Part Number 2-1445052-2 2-1445086-2 2-1445095-2 1445022-2 2-1445052-3 2-1445086-3 2-1445095-3 1445022-3 2-1445052-4 2-1445086-4 2-1445095-4 1445022-4 2-1445052-5 2-1445086-5 2-1445095-5 1445022-5 2-1445052-6 2-1445086-6 2-1445095-6 1445022-6 2-1445052-7 2-1445086-7 2-1445095-7 1445022-7 2-1445052-8 2-1445086-8 2-1445095-8 1445022-8 2-1445052-9 2-1445086-9 2-1445095-9 1445022-9 3-1445052-0 3-1445086-0 3-1445095-0 1-1445022-0 3-1445052-1 3-1445086-1 3-1445095-1 1-1445022-1 3-1445052-2 3-1445086-2 3-1445095-2 1-1445022-2 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 32 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) .236 [6.00] Dia. (Continued) .118 [3.00] Ref. .051 [1.30] Circuit 1 Single Row, Surface Mount, with Surface Mount Hold-down Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Hold-down .020 [0.51] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .152 [3.86] Material and Finish A Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel .156 [3.97] Ref. Contact C .050.003 [1.270.08] Typ. .118 3.00 Typ. Circuit 1 .100.003 [2.540.08] .126 [3.20] .065.003 [1.650.08] 2 Plc. Related Product Data Mateable Housings: .143 [3.635] Single Row Receptacle Housing-- page 23 .135.003 [3.430.08] 2 Plc. B Recommended PC Board Layout* Number of Circuits 2 3 4 5 6 7 8 9 10 11 12 Dimensions Header Part Numbers A B C .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 .410 10.41 .528 13.41 .646 16.41 .765 19.41 .882 22.41 1.001 25.41 1.119 28.41 1.237 31.41 1.355 34.41 1.473 37.41 1.591 40.41 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 Plating A Plating B Plating C Mates with Receptacle Housing Part Number 2-1445053-2 2-1445087-2 2-1445096-2 1445022-2 2-1445053-3 2-1445087-3 2-1445096-3 1445022-3 2-1445053-4 2-1445087-4 2-1445096-4 1445022-4 2-1445053-5 2-1445087-5 2-1445096-5 1445022-5 2-1445053-6 2-1445087-6 2-1445096-6 1445022-6 2-1445053-7 2-1445087-7 2-1445096-7 1445022-7 2-1445053-8 2-1445087-8 2-1445096-8 1445022-8 2-1445053-9 2-1445087-9 2-1445096-9 1445022-9 3-1445053-0 3-1445087-0 3-1445096-0 1-1445022-0 3-1445053-1 3-1445087-1 3-1445096-1 1-1445022-1 3-1445053-2 3-1445087-2 3-1445096-2 1-1445022-2 *Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 33 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 High Density .364 [9.24] Ref. Vertical Header Assemblies Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) .270 [6.86] Vertical Header Assemblies (Continued) .118 [3.00] Z Dual Row, Through-Hole, with Retention Feature on Soldertail Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline .364 [9.24] Material and Finish Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 Z Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel .118 [3.00] .125 [3.18] Section Z-Z A Retention Feature Located On End Contacts Only 4 Plc. Ref. .341 [8.67] B .138 [3.50] Min. .118 [3.00] Typ. Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel .118 [3.00] Related Product Data Mateable Housings: .079 [2.00] Min. .040 [1.02] Dia. Typ. Dual Row Receptacle Housing--page 24 Recommended PC Board Layout* Number of Circuits 2 4 6 8 10 12 14 16 18 20 22 24 A B Plating A Plating B Plating C Mates with Receptacle Housing Part Number .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 -- 3-794630-2 3-794631-2 3-794632-2 794617-2 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 3-794630-4 3-794631-4 3-794632-4 794617-4 3-794630-6 3-794631-6 3-794632-6 794617-6 3-794630-8 3-794631-8 3-794632-8 794617-8 4-794630-0 4-794631-0 4-794632-0 1-794617-0 4-794630-2 4-794631-2 4-794632-2 1-794617-2 4-794630-4 4-794631-4 4-794632-4 1-794617-4 4-794630-6 4-794631-6 4-794632-6 1-794617-6 4-794630-8 4-794631-8 4-794632-8 1-794617-8 5-794630-0 5-794631-0 5-794632-0 2-794617-0 5-794630-2 5-794631-2 5-794632-2 2-794617-2 5-794630-4 5-794631-4 5-794632-4 2-794617-4 Dimensions Header Part Numbers *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 34 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) .118 [3.00] Z (Continued) Dual Row, Through-Hole, with Retention Feature on Soldertail and Metal Through-Hole Hold-down High Density .270 [6.86] Vertical Header Assemblies .364 [9.24] Contact Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Material and Finish Housing--High Temperature Nylon, Black Flammability Rating--UL 94V-0 .125 [3.18] .118 [3.00] Z Section Z-Z A Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Hold-down Retention Feature Located On End Contacts Only 4 Plc. Ref. .341 [8.67] B .084 [2.13] .118 [3.00] .059 [1.50] .118 [3.00] .095 [2.41] Dia. Typ. Related Product Data Mateable Housings: .040 [1.02] Dia. Typ. .087 [2.20] Min. .079 [2.00] Min. C Dual Row Receptacle Housing--page 24 Recommended PC Board Layout* Number of Circuits 2 4 6 8 10 12 14 16 18 20 22 24 Dimensions Header Part Numbers Mates with Receptacle Housing Part Number A B C Plating A Plating B Plating C .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 -- .169 4.30 .287 7.30 .406 10.30 .524 13.30 .642 16.30 .760 19.30 .878 22.30 .996 25.30 1.114 28.30 1.232 31.30 1.350 34.30 1.469 37.30 3-794680-2 3-794681-2 3-794682-2 794617-2 3-794680-4 3-794681-4 3-794682-4 794617-4 3-794680-6 3-794681-6 3-794682-6 794617-6 3-794680-8 3-794681-8 3-794682-8 794617-8 4-794680-0 4-794681-0 4-794682-0 1-794617-0 4-794680-2 4-794681-2 4-794682-2 1-794617-2 4-794680-4 4-794681-4 4-794682-4 1-794617-4 4-794680-6 4-794681-6 4-794682-6 1-794617-6 4-794680-8 4-794681-8 4-794682-8 1-794617-8 5-794680-0 5-794681-0 5-794682-0 2-794617-0 5-794680-2 5-794681-2 5-794682-2 2-794617-2 5-794680-4 5-794681-4 5-794682-4 2-794617-4 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 35 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP High Density PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) .118 [3.00] Typ. Vertical Header Assemblies (Continued) .431 [10.94] Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Dual Row, Surface Mount, with Metal Through-Hole Hold-down .236 [6.00] Dia. Material and Finish Housing--High Temperature Nylon, Black Flammability Rating--UL 94V-0 Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel B 6 8 10 12 14 16 18 20 22 24 .185 [4.70] .370 [9.40] .050 [1.27] .095 [2.41] Dia. 2 Plc. .098 [2.50] Min. .087 [2.20] Min. Circuit 1 .084 [2.14] C Dual Row Receptacle Housing--page 24 4 .025 [0.635] .100 [2.54] Typ. Related Product Data Mateable Housings: Hold-down .118 [3.00] .050 [1.27] Typ. Pick-up Button--Kapton 2 Contact .364 .477 [9.24] [12.12] Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Number of Circuits .270 [6.86] .010 [0.25] A Recommended PC Board Layout* Dimensions A .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.10 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 Header Part Numbers Mates with Receptacle Housing Part Number B C Plating A Plating B Plating C -- .169 4.30 .287 7.30 .406 10.30 .524 13.30 .642 16.30 .760 19.30 .878 22.30 .996 25.30 1.114 28.30 1.232 31.30 1.350 34.30 1.469 37.30 3-794633-2 3-794634-2 3-794635-2 794617-2 3-794633-4 3-794634-4 3-794635-4 794617-4 3-794633-6 3-794634-6 3-794635-6 794617-6 3-794633-8 3-794634-8 3-794635-8 794617-8 4-794633-0 4-794634-0 4-794635-0 1-794617-0 4-794633-2 4-794634-2 4-794635-2 1-794617-2 4-794633-4 4-794634-4 4-794635-4 1-794617-4 4-794633-6 4-794634-6 4-794635-6 1-794617-6 4-794633-8 4-794634-8 4-794635-8 1-794617-8 5-794633-0 5-794634-0 5-794635-0 2-794617-0 5-794633-2 5-794634-2 5-794635-2 2-794617-2 5-794633-4 5-794634-4 5-794635-4 2-794617-4 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 2.827 21.00 0.945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 *Recommended PC Board thickness .062 [1.57]. Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 36 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Soft Shell Pin and Socket Connectors AMP PageHead_12_HelvCdBd Micro MATE-N-LOK 3 mm(Continued) Connector System (Continued) High Density Vertical Header Assemblies .118 [3.00] Typ. (Continued) Dual Row, Surface Mount, with Surface Mount Hold-down .431 [10.94] Housing -- High Temperature Nylon, Black Flammability Rating -- UL 94V-0 .236 [6.00] Dia. A Contacts--Brass Plating A--.000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Plating B--.000015 [0.00038] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Plating C--.000030 [0.00076] gold in mating area, .000100 [0.00254] min. tin in solder area, with entire contact underplated .000050 [0.00127] min. nickel Hold-downs--Phosphor Bronze, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel Hold-down .050 [1.27] Typ. .025 .068 [.635] [1.715] 6 8 10 12 14 16 18 20 22 24 .118 [3.00] .100 [2.54] .050 [1.27] .370 [9.40] .185 [4.70] .032 [0.825] .098 [2.50] Min. .065 [1.65] Typ. Circuit 1 .118 [3.00] Min. .135 [3.43] Typ. C Dual Row Receptacle Housing--page 24 4 Contact B Related Product Data Mateable Housings: 2 .270 [6.86] .010 [0.25] .364 [9.24] Pick-up Button -- Kapton Number of Circuits Micro MATE-N-LOK 3 mm Connector System .118 [3.00] Centerline Material and Finish Recommended PC Board Layout* Dimensions A .276 7.00 .394 10.00 .512 13.00 .630 16.00 .748 19.00 .866 22.00 .984 25.00 1.102 28.00 1.220 31.00 1.339 34.00 1.457 37.00 1.575 40.00 Header Part Numbers Mates with Receptacle Housing Part Number B C Plating A Plating B Plating C -- .286 7.27 .404 10.27 .522 13.27 .640 16.27 .758 19.27 .876 22.27 .994 25.27 1.112 28.27 1.230 31.27 1.349 34.27 1.467 37.27 1.585 40.27 3-794636-2 3-794637-2 3-794638-2 794617-2 3-794636-4 3-794637-4 3-794638-4 794617-4 3-794636-6 3-794637-6 3-794638-6 794617-6 3-794636-8 3-794637-8 3-794638-8 794617-8 4-794636-0 4-794637-0 4-794638-0 1-794617-0 4-794636-2 4-794637-2 4-794638-2 1-794617-2 4-794636-4 4-794637-4 4-794638-4 1-794617-4 4-794636-6 4-794637-6 4-794638-6 1-794617-6 4-794636-8 4-794637-8 4-794638-8 1-794617-8 5-794636-0 5-794637-0 5-794638-0 2-794617-0 5-794636-2 5-794637-2 5-794638-2 2-794617-2 5-794636-4 5-794637-4 5-794638-4 2-794617-4 .118 3.00 .236 6.00 .354 9.00 .472 12.00 .591 15.00 .709 18.00 .827 21.00 .945 24.00 1.063 27.00 1.181 30.00 1.299 33.00 *Always consult customer drawing for PC Board layout dimensions. Note: All part numbers are RoHS Compliant. 37 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208