KEMET Organic Capacitor (KO-CAP) T520 Series Polymer Tantalum Overview The KEMET Organic Capacitor (KO-CAP) is a tantalum capacitor with a Ta anode and Ta2O5 dielectric. A conductive organic polymer replaces the traditionally used MnO2 as the cathode plate of the capacitor. This results in very low ESR and improved capacitance retention at high frequency. The KO-CAP also exhibits a benign failure mode which eliminates the ignition failures that can occur in standard MnO2 tantalum types. KOCAPs may also be operated at steady state voltages up to 90% of rated voltage for part types with rated voltages of 10 volts and up to 80% of rated voltage for part types >10 volts with equivalent or better reliability than traditional MnO2 tantalum capacitors operated at 50% of rated voltage. The T520 Series KO-CAP Low ESR Polymer captures the best features of multilayer ceramic (low ESR, high frequency capacitance retention), aluminum electrolytic (higher capacitance, benign failure mode), and proven solid tantalum technology (volumetric efficiency, surface mount capability, extremely long life). The T520 can reduce component counts, eliminate throughhole assembly by replacing cumbersome leaded aluminum capacitors, and offer a cost-effective and space-saving solution. Benefits Applications * * * * * * * * * * * * * ESR: 6m to 90m -55C to 105C operating temperature range Polymer cathode technology High frequency capacitance retention Non-ignition failure mode Capacitance: 15F to 1,500F Voltage: 2V to 25V 100% accelerated steady state aging 100% surge current tested Taped and reeled per EIA 481-D Volumetric efficiency Self-healing mechanism EIA standard case sizes Typical applications include DC/DC converters, notebook PCs, portable electronics, telecommunications (mobile phone and base station), displays, SSD, HDD and USB. Environmental Compliance RoHS Compliant (6/6)* according to Directive 2002/95/EC *When ordered with 100% Sn Solder SPICE For a detailed analysis of specific part numbers, please visit kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. One WORLD One Brand One Strategy One Focus One Team (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com One KEMET T2015_T520 * 11/29/2011 1 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Ordering Information T 520 V 157 M 006 A T E045 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material ESR Code T= Tantalum 520 = Polymer T = 100% Matte Tin (Sn) Plated H = Tin/Lead (SnPb) Solder Coated (5% Pb minimum) E = ESR Last three digits specify ESR in m. (045 = 45m) A = 3216-18 First two digits represent B = 3528-21 C = 6032-28 significant figures. Third D = 7343-31 H = 7260-20 digit specifies L = 6032-19 number of zeros. M = 3528-15 T = 3528-12 U = 6032-15 V = 7343-19 W = 7343-15 X = 7343-43 Y = 7343-40 M = 20% 2R5 = 2.5V 003 = 3V 004 = 4V 006 = 6.3V 008 = 8V 010 = 10V 12R = 12.5V 016 = 16V 020 = 20V 025 = 25V A = N/A Packaging (C-Spec) Blank = 7" Reel 7280 = 13" Reel Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range DF (120Hz) ESR (100kHz) Leakage Current -55C to 105C 10F-1,500F @ 120 Hz/25C M Tolerance (20%) 2.5V-25V 10% Refer to Part Number Electrical Specification Table 0.1CV (A) at Rated Voltage after 5 minutes (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 2 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Qualification Test Condition Characteristics C/C Endurance Storage Life Humidity Temperature Stability 105C @ Rated Voltage, 2,000 Hours 105C @ 0 Volts, 2,000 Hours 60C, 90% RH, 500Hr, Rated Voltage 60C, 90% RH, 500Hr, No Load Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +105C, +25C DF Within initial limits DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit C/C Within -20%/+10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit C/C Within -5%/+35% of initial value DF Within initial limits DCL Within 5.0 x initial limit ESR Within 2.0 x initial limit +25C -55C +85C +105C C/C IL* 20% 20% 30% DF IL IL 1.2 x IL 1.5 x IL DCL IL n/a 10 x IL 10 x IL C/C Surge Voltage Mechanical Shock/Vibration Within -20%/+10% of initial value 105 C, 1.32 x Rated Voltage, 1,000 cycles MIL-STD-202, Meth. 213, Cond. I, 100G Peak MIL-STD-202, Meth. 204, Cond. D, 10Hz to 2000Hz, 20G Peak Within -20%/+10% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 3 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 100 1000 T520B157M006ATE035_Imp T520V337M006ATE015_Imp 10 T520D337M006ATE009_Imp T520B157M006ATE035_ESR Capacitance (F) Impedance,ESR (Ohms) T520C227M006ATE025_Imp T520C227M006ATE025_ESR T520V337M006ATE015_ESR 1 T520D337M006ATE009_ESR 0.1 100 10 T520B157M006ATE035 T520C227M006ATE025 T520V337M006ATE015 T520D337M006ATE009 0.01 1 0.001 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions - Millimeters (Inches) Metric will govern Termination cutout at KEMET's option, either end Case Size KEMET EIA A 3216-18 B 3528-21 C 6032-28 D 7343-31 H 7260-38 L 6032-19 M 3528-15 T 3528-12 U 6032-15 V 7343-19 W 7343-15 X 7343-43 Y 7343-40 Component L* 3.2 0.2 (.126 .008) 3.5 02 (138 .008) 6.0 0.3 (.236 .03) 7.3 0.3 (287 .012) 7.3 0.3 (.287 .012) 6.0 0.3 (236 .012) 3.5 0.2 (.138 .008) 3.5 0.2 (.138 .008) 6.0 0.3 (236 .012) 7.3 0.3 (287 .012) 7.3 0.3 (287 .012) 7.3 0.3 (.287 .012) 7.3 0.3 (.287 .012) W* H* 1.6 0.2 1.6 0.2 (.063 .008) (.063 .008) 2.8 0.2 1.9 0.2 (.110 .008) (.075 .008) 3.2 0.3 2.5 0.3 (.126 .012) (.098 .012) 4.3 0.3 2.8 0.3 (.169 .012) (.110 .012) 6.0 0.3 2.0 (.078) max (.236 .012) 3.2 0.2 1.9 (.075) (.110 .008) 2.8 0.2 1.5 (.059) (.110 .008) 2.8 0.2 1.2 (.047) (.110 .008) 3.2 0.2 1.5 (.059) (.110 .008) 4.3 0.3 1.9 max (.169 .012) 4.3 0.3 1.5 (.059) (.169 .012) 4.3 0.3 4.0 0.3 (.169 .012) (.157 .012) 4.3 0.3 4.0 (.157) (.169 .012) F* 0.1 S* 0.3 B* 0.15 (.004) (.012) (Ref) .006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) 0.4 (.016) 0.4 (.016) 0.13 (.005) 1.4 (.055) 1.1 (.043) 1.3 (.051) 1.8 (.071) 2.2 (.087) 0.10 0.10 (.004 .004) 0.10 0.10 (.004 .004) 0.10 0.10 (.004 .004) 0.10 0.10 (.004 .004) 0.10 0.10 (.004 .004) 0.5 (.020) 1.0 (.039) 0.13 (.005) 2.1 (.083) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.1 ( (.122) 2.8 (.110) 2.4 (.094) 0.9 (.035) 1.0 (.039) 0.13 (.005) 0.9 (.035) 1.0 (.039) 0.13 (.005) 0.13 (.005) 3.5 (.138) 3.5 (.138) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.1 (.122) 2.8 (.110) 2.4 (.094) n/a 0.05 (.002) n/a n/a 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087) 0.8 (.031) n/a 0.05 (.002) n/a n/a 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087) 2.2 (.087) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.1 (.122) 2.8 (.110) 2.4 (.094) 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 2.4 (.094) 1.3 (.051) n/a 0.05 (.002) n/a n/a 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.2 (.047) 0.8 (.031) 0.4 (.016) 2.2 (.087) 0.8 (.031) 0.4 (.016) 2.2 (.087) 1.3 (.051) 0.5 (.020) 2.4 (.094) 1.3 (.051) 0.5 (.020) 4.1 (.161) 1.3 (.051) 0.5 (.020) 2.2 (.087) 1.3 (.051) 2.2 (.087) 0.8 (.031) 2.2 (.087) 2.4 (.094) 1.3 (.051) 0.5 (.020) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 0.10 (.004 .004) 0.10 0.10 (.004 .004) 3.8 (.150) 3.5 (.138) 3.5 (.138) Notes: (Ref) - Dimensions provided for reference only. No dimensions are provided for B, P or R because low profile cases do not have a bevel or a notch. * MIL-C-55365/8 specified dimensions (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 4 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Table 1 - Ratings & Part Number Reference Rated Voltage VDC 2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 VDC Rated Voltage Rated Cap 120Hz F 470 47 56 56 68 68 100 100 100 100 100 100 150 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 F 120Hz Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current KEMET/EIA V/7343-19 (See below for part options) T520V477M002A(1)E040 +20C Amps 94 +20C 120Hz % Max 10 +20C 100kHz mOhms 40 +45C 100kHz mAmps 2200 Temp260C J-STD-020D 3 A/3216-18 T/3528-12 T/3528-12 A/3216-18 A/3216-18 T/3528-12 T/3528-12 B/3528-20 B/3528-20 B/3528-20 B/3528-20 U/6032-15 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 U/6032-15 C/6032-28 C/6032-28 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 C/6032-28 L/6032-19 L/6032-19 L/6032-19 W/7343-15 W/7343-15 W/7343-15 T520A476M2R5A(1)E090 T520T566M2R5A(1)E040 T520T566M2R5A(1)E070 T520A686M2R5A(1)E070 T520A686M2R5A(1)E080 T520T107M2R5A(1)E040 T520T107M2R5A(1)E070 T520B107M2R5A(1)E025 T520B107M2R5A(1)E035 T520B107M2R5A(1)E040 T520B107M2R5A(1)E070 T520U157M2R5A(1)E055 T520B227M2R5A(1)E015 T520B227M2R5A(1)E018 T520B227M2R5A(1)E021 T520B227M2R5A(1)E025 T520B227M2R5A(1)E030 T520B227M2R5A(1)E035 T520B227M2R5A(1)E055 T520B227M2R5A(1)E070 T520U227M2R5A(1)E055 T520C227M2R5A(1)E025 T520C227M2R5A(1)E045 T520W227M2R5A(1)E025 T520V227M2R5A(1)E006 T520V227M2R5A(1)E007 T520V227M2R5A(1)E009 T520V227M2R5A(1)E012 T520V227M2R5A(1)E015 T520V227M2R5A(1)E025 T520V227M2R5A(1)E045 T520D227M2R5A(1)E007 T520D227M2R5A(1)E040 T520B337M2R5A(1)E015 T520B337M2R5A(1)E018 T520B337M2R5A(1)E035 T520B337M2R5A(1)E045 T520B337M2R5A(1)E070 T520C337M2R5A(1)E015 T520C337M2R5A(1)E018 T520C337M2R5A(1)E025 T520C337M2R5A(1)E045 T520L337M2R5A(1)E009 T520L337M2R5A(1)E012 T520L337M2R5A(1)E025 T520W337M2R5A(1)E015 T520W337M2R5A(1)E025 T520W337M2R5A(1)E040 KEMET/EIA (see below for part options) 12 14 14 17 17 25 25 25 25 25 25 38 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 55 83 83 83 83 83 83 83 83 83 83 83 83 83 83 83 Amps +20C 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 % Max +20C 120Hz 90 40 70 70 80 40 70 25 35 40 70 55 15 18 21 25 30 35 55 70 55 25 45 25 6 7 9 12 15 25 45 7 40 15 18 35 45 70 15 18 25 45 9 12 25 15 25 40 mOhms +20C 100kHz 1100 1600 1200 1300 1200 1600 1200 2300 1900 1800 1300 1600 2900 2700 2500 2300 2100 1900 1500 1300 1600 2600 1900 2700 5600 5200 4600 3900 3500 2700 2000 5700 2400 2900 2700 1900 1700 1300 3300 3000 2600 1900 4100 3500 2400 3500 2700 2100 mAmps +45C 100kHz 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 J-STD-020D Temp260C Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Moisture Rated Sensitivity Temp (C) 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (C) Rated Temp Other part number options: 1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2015_T520 * 11/29/2011 5 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current KEMET/EIA V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 (See below for part options) T520V337M2R5A(1)E006 T520V337M2R5A(1)E007 T520V337M2R5A(1)E009 T520V337M2R5A(1)E012 T520V337M2R5A(1)E015 T520V337M2R5A(1)E018 T520V337M2R5A(1)E025 T520V337M2R5A(1)E040 T520D337M2R5A(1)E006 T520D337M2R5A(1)E007 T520V477M2R5A(1)E007 T520V477M2R5A(1)E009 T520V477M2R5A(1)E012 T520V477M2R5A(1)E015 T520V477M2R5A(1)E018 T520C477M2R5A(1)E025 T520C477M2R5A(1)E045 T520D477M2R5A(1)E006 T520D477M2R5A(1)E007 T520D477M2R5A(1)E009 T520D687M2R5A(1)E010 T520D687M2R5A(1)E015 T520D687M2R5A(1)E040 T520Y687M2R5A(1)E015 T520Y687M2R5A(1)E025 T520D108M2R5A(1)E015 T520D108M2R5A(1)E030 T520Y108M2R5A(1)E010 T520Y108M2R5A(1)E015 T520Y108M2R5A(1)E025 T520X108M2R5A(1)E010 +20C Amps 83 83 83 83 83 83 83 83 83 83 118 118 118 118 118 118 118 118 118 118 170 170 170 170 170 250 250 250 250 250 250 +20C 120Hz % Max 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 +20C 100kHz mOhms 6 7 9 12 15 18 25 40 6 7 7 9 12 15 18 25 45 6 7 9 10 15 40 15 25 15 30 10 15 25 10 +45C 100kHz mAmps 5600 5200 4600 3900 3500 3200 2700 2200 6100 5700 5200 4600 3900 3500 3200 2600 1900 6100 5700 5000 4700 3900 2400 4000 3100 3900 2700 4900 4000 3100 5000 Temp260C J-STD-020D 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Moisture Rated Sensitivity Temp 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 120Hz F 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 680 680 680 680 680 1000 1000 1000 1000 1000 1000 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 100 100 100 100 150 150 150 150 330 330 330 330 680 680 1000 1000 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 X/7343-43 X/7343-43 T520B107M003A(1)E025 T520B107M003A(1)E035 T520B107M003A(1)E040 T520B107M003A(1)E070 T520B157M003A(1)E025 T520B157M003A(1)E035 T520B157M003A(1)E040 T520B157M003A(1)E070 T520V337M003A(1)E009 T520V337M003A(1)E012 T520V337M003A(1)E015 T520V337M003A(1)E025 T520D687M003A(1)E015 T520D687M003A(1)E040 T520X108M003A(1)E015 T520X108M003A(1)E030 30 30 30 30 45 45 45 45 99 99 99 99 204 204 300 300 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 25 35 40 70 25 35 40 70 9 12 15 25 15 40 15 30 2300 1900 1800 1300 2300 1900 1800 1300 4600 3900 3500 2700 3900 2400 4100 2900 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 4 15 F 120Hz T/3528-12 T520T156M004A(1)E100 KEMET/EIA 6 Amps +20C 8 % Max +20C 120Hz 100 mOhms +20C 100kHz 1000 mAmps +45C 100kHz 3 J-STD-020D Temp260C 105 (see below for part options) Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity VDC VDC Rated Voltage Rated Cap (C) 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (C) Rated Temp Other part number options: 1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2015_T520 * 11/29/2011 6 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 VDC Rated Voltage Rated Cap 120Hz F 33 33 47 47 47 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 220 F 120Hz Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current KEMET/EIA A/3216-18 A/3216-18 A/3216-18 A/3216-18 T/3528-12 T/3528-12 B/3528-20 B/3528-20 B/3528-20 B/3528-20 U/6032-15 A/3216-18 A/3216-18 T/3528-12 T/3528-12 B/3528-20 B/3528-20 B/3528-20 B/3528-20 U/6032-15 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 U/6032-15 C/6032-28 C/6032-28 C/6032-28 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 B/3528-20 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 C/6032-28 C/6032-28 L/6032-19 L/6032-19 W/7343-15 W/7343-15 (See below for part options) T520A336M004A(1)E070 T520A336M004A(1)E080 T520A476M004A(1)E070 T520A476M004A(1)E080 T520T476M004A(1)E070 T520T686M004A(1)E070 T520B686M004A(1)E025 T520B686M004A(1)E035 T520B686M004A(1)E040 T520B686M004A(1)E070 T520U686M004A(1)E055 T520A107M004A(1)E150 T520A107M004A(1)E200 T520T107M004A(1)E070 T520T107M004A(1)E150 T520B107M004A(1)E025 T520B107M004A(1)E035 T520B107M004A(1)E040 T520B107M004A(1)E070 T520U107M004A(1)E055 T520B157M004A(1)E015 T520B157M004A(1)E018 T520B157M004A(1)E025 T520B157M004A(1)E030 T520B157M004A(1)E035 T520B157M004A(1)E040 T520B157M004A(1)E070 T520U157M004A(1)E055 T520C157M004A(1)E015 T520C157M004A(1)E025 T520C157M004A(1)E045 T520C157M004A(1)E100 T520V157M004A(1)E007 T520V157M004A(1)E009 T520V157M004A(1)E012 T520V157M004A(1)E015 T520V157M004A(1)E025 T520D157M004A(1)E007 T520B227M004A(1)E035 T520B227M004A(1)E045 T520B227M004A(1)E070 T520C227M004A(1)E015 T520C227M004A(1)E018 T520C227M004A(1)E025 T520C227M004A(1)E045 T520C227M004A(1)E055 T520L227M004A(1)E012 T520L227M004A(1)E025 T520W227M004A(1)E025 T520W227M004A(1)E040 KEMET/EIA (see below for part options) +20C Amps 13 13 19 19 19 27 27 27 27 27 27 40 40 40 40 40 40 40 40 40 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 88 88 88 88 88 88 88 88 88 88 88 88 Amps +20C +20C 120Hz % Max 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 10 10 % Max +20C 120Hz +20C 100kHz mOhms 70 80 70 80 70 70 25 35 40 70 55 150 200 70 150 25 35 40 70 55 15 18 25 30 35 40 70 55 15 25 45 100 7 9 12 15 25 7 35 45 70 15 18 25 45 55 12 25 25 40 mOhms +20C 100kHz +45C 100kHz mAmps 1300 1200 1300 1200 1200 1200 2300 1900 1800 1300 1600 900 700 1200 800 2300 1900 1800 1300 1600 2900 2700 2300 2100 1900 1800 1300 1600 3300 2600 1900 1300 5200 4600 3900 3500 2700 5700 1900 1700 1300 3300 3000 2600 1900 1700 3500 2400 2700 2100 mAmps +45C 100kHz Temp260C J-STD-020D 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 J-STD-020D Temp260C Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Moisture Rated Sensitivity Temp (C) 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (C) Rated Temp Other part number options: 1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2015_T520 * 11/29/2011 7 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 VDC Rated Voltage Rated Cap 120Hz F 220 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 680 680 680 680 680 680 680 680 680 15 22 22 33 33 33 F 120Hz Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current KEMET/EIA V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 C/6032-28 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 (See below for part options) T520V227M004A(1)E006 T520V227M004A(1)E007 T520V227M004A(1)E009 T520V227M004A(1)E012 T520V227M004A(1)E015 T520V227M004A(1)E018 T520V227M004A(1)E025 T520V227M004A(1)E040 T520V227M004A(1)E045 T520D227M004A(1)E006 T520D227M004A(1)E007 T520D227M004A(1)E012 T520D227M004A(1)E065 T520C337M004A(1)E025 T520C337M004A(1)E045 T520V337M004A(1)E007 T520V337M004A(1)E009 T520V337M004A(1)E012 T520V337M004A(1)E018 T520V337M004A(1)E025 T520V337M004A(1)E040 T520D337M004A(1)E006 T520D337M004A(1)E007 T520D337M004A(1)E009 T520D337M004A(1)E012 T520D337M004A(1)E015 T520D337M004A(1)E040 T520D337M004A(1)E045 T520D477M004A(1)E010 T520D477M004A(1)E012 T520D477M004A(1)E015 T520D477M004A(1)E018 T520D477M004A(1)E025 T520D477M004A(1)E040 T520D687M004A(1)E012 T520D687M004A(1)E015 T520D687M004A(1)E025 T520Y687M004A(1)E010 T520Y687M004A(1)E015 T520Y687M004A(1)E025 T520X687M004A(1)E010 T520X687M004A(1)E015 T520X687M004A(1)E035 +20C Amps 88 88 88 88 88 88 88 88 88 88 88 88 88 132 132 132 132 132 132 132 132 132 132 132 132 132 132 132 188 188 188 188 188 188 272 272 272 272 272 272 272 272 272 +20C 120Hz % Max 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 +20C 100kHz mOhms 6 7 9 12 15 18 25 40 45 6 7 12 65 25 45 7 9 12 18 25 40 6 7 9 12 15 40 45 10 12 15 18 25 40 12 15 25 10 15 25 10 15 35 +45C 100kHz mAmps 5600 5200 4600 3900 3500 3200 2700 2200 2000 6100 5700 4300 1900 2600 1900 5200 4600 3900 3200 2700 2200 6100 5700 5000 4300 3900 2400 2200 4700 4300 3900 3500 3000 2400 4300 3900 3000 4900 4000 3100 5000 4100 2700 Temp260C J-STD-020D 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 T/3528-12 A/3216-18 A/3216-18 A/3216-18 A/3216-18 A/3216-18 T520T156M006A(1)E100 T520A226M006A(1)E090 T520A226M006A(1)E100 T520A336M006A(1)E070 T520A336M006A(1)E080 T520A336M006A(1)E120 KEMET/EIA (see below for part options) 9 14 14 21 21 21 Amps +20C 8 8 8 8 8 8 % Max +20C 120Hz 100 90 100 70 80 120 mOhms +20C 100kHz 1000 1100 1100 1300 1200 1000 mAmps +45C 100kHz 3 3 3 3 3 3 J-STD-020D Temp260C Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Moisture Rated Sensitivity Temp (C) 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (C) Rated Temp Other part number options: 1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2015_T520 * 11/29/2011 8 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 VDC Rated Voltage Rated Cap 120Hz F 33 33 33 33 33 33 47 47 47 47 47 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 120 150 150 150 150 150 150 150 150 150 150 F 120Hz Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current KEMET/EIA T/3528-12 B/3528-20 B/3528-20 B/3528-20 B/3528-20 C/6032-28 A/3216-18 T/3528-12 T/3528-12 B/3528-20 B/3528-20 B/3528-20 B/3528-20 A/3216-18 T/3528-12 T/3528-12 B/3528-20 B/3528-20 B/3528-20 B/3528-20 U/6032-15 U/6032-15 C/6032-28 T/3528-12 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 B/3528-20 U/6032-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 C/6032-28 C/6032-28 B/3528-20 M/3528-15 M/3528-15 B/3528-20 B/3528-20 B/3528-20 B/3528-20 M/3528-15 M/3528-15 M/3528-15 C/6032-28 (See below for part options) T520T336M006A(1)E070 T520B336M006A(1)E025 T520B336M006A(1)E035 T520B336M006A(1)E040 T520B336M006A(1)E070 T520C336M006A(1)E100 T520A476M006A(1)E150 T520T476M006A(1)E040 T520T476M006A(1)E070 T520B476M006A(1)E025 T520B476M006A(1)E035 T520B476M006A(1)E040 T520B476M006A(1)E070 T520A686M006A(1)E150 T520T686M006A(1)E070 T520T686M006A(1)E150 T520B686M006A(1)E025 T520B686M006A(1)E035 T520B686M006A(1)E040 T520B686M006A(1)E070 T520U686M006A(1)E055 T520U686M006A(1)E070 T520C686M006A(1)E100 T520T107M006A(1)E070 T520B107M006A(1)E015 T520B107M006A(1)E018 T520B107M006A(1)E025 T520B107M006A(1)E035 T520B107M006A(1)E040 T520B107M006A(1)E045 T520B107M006A(1)E070 T520U107M006A(1)E055 T520W107M006A(1)E040 T520V107M006A(1)E009 T520V107M006A(1)E012 T520V107M006A(1)E015 T520V107M006A(1)E045 T520C107M006A(1)E025 T520C107M006A(1)E045 T520B127M006A(1)E035 T520M157M006A(1)E070 T520M157M006A(1)E150 T520B157M006A(1)E025 T520B157M006A(1)E035 T520B157M006A(1)E045 T520B157M006A(1)E070 T520M157M006A(1)E070 T520M157M006A(1)E150 T520M157M006A(1)E200 T520C157M006A(1)E015 KEMET/EIA (see below for part options) +20C Amps 21 21 21 21 21 21 30 30 30 30 30 30 30 43 43 43 43 43 43 43 43 43 43 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 76 95 95 95 95 95 95 95 95 95 95 Amps +20C +20C 120Hz % Max 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 8 % Max +20C 120Hz +20C 100kHz mOhms 70 25 35 40 70 100 150 40 70 25 35 40 70 150 70 150 25 35 40 70 55 70 100 70 15 18 25 35 40 45 70 55 40 9 12 15 45 25 45 35 70 150 25 35 45 70 70 150 200 15 mOhms +20C 100kHz +45C 100kHz mAmps 1200 2300 1900 1800 1300 1300 900 1600 1200 2300 1900 1800 1300 900 1200 800 2300 1900 1800 1300 1600 1400 1300 1200 2900 2700 2300 1900 1800 1700 1300 1600 2100 4600 3900 3500 2000 2600 1900 1900 1300 900 2300 1900 1700 1300 1300 900 800 3300 mAmps +45C 100kHz Temp260C J-STD-020D 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 J-STD-020D Temp260C Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Moisture Rated Sensitivity Temp (C) 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (C) Rated Temp Other part number options: 1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2015_T520 * 11/29/2011 9 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 VDC Rated Voltage Rated Cap 120Hz F 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 F 120Hz Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current KEMET/EIA C/6032-28 C/6032-28 C/6032-28 U/6032-15 U/6032-15 L/6032-19 L/6032-19 W/7343-15 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-20 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 (See below for part options) T520C157M006A(1)E025 T520C157M006A(1)E045 T520C157M006A(1)E055 T520U157M006A(1)E045 T520U157M006A(1)E055 T520L157M006A(1)E012 T520L157M006A(1)E025 T520W157M006A(1)E025 T520W157M006A(1)E040 T520V157M006A(1)E006 T520V157M006A(1)E007 T520V157M006A(1)E009 T520V157M006A(1)E012 T520V157M006A(1)E015 T520V157M006A(1)E018 T520V157M006A(1)E025 T520V157M006A(1)E040 T520V157M006A(1)E045 T520D157M006A(1)E006 T520D157M006A(1)E007 T520D157M006A(1)E015 T520D157M006A(1)E025 T520D157M006A(1)E055 T520B227M006A(1)E035 T520B227M006A(1)E045 T520B227M006A(1)E070 T520C227M006A(1)E015 T520C227M006A(1)E018 T520C227M006A(1)E025 T520C227M006A(1)E045 T520V227M006A(1)E007 T520V227M006A(1)E009 T520V227M006A(1)E012 T520V227M006A(1)E015 T520V227M006A(1)E018 T520V227M006A(1)E025 T520V227M006A(1)E040 T520D227M006A(1)E006 T520D227M006A(1)E007 T520D227M006A(1)E009 T520D227M006A(1)E015 T520D227M006A(1)E018 T520D227M006A(1)E025 T520D227M006A(1)E040 T520D227M006A(1)E050 T520V337M006A(1)E015 T520V337M006A(1)E018 T520V337M006A(1)E025 T520V337M006A(1)E040 T520V337M006A(1)E045 KEMET/EIA (see below for part options) +20C Amps 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 139 208 208 208 208 208 Amps +20C +20C 120Hz % Max 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 % Max +20C 120Hz +20C 100kHz mOhms 25 45 55 45 55 12 25 25 40 6 7 9 12 15 18 25 40 45 6 7 15 25 55 35 45 70 15 18 25 45 7 9 12 15 18 25 40 6 7 9 15 18 25 40 50 15 18 25 40 45 mOhms +20C 100kHz +45C 100kHz mAmps 2600 1900 1700 1700 1600 3500 2400 2700 2100 5600 5200 4600 3900 3500 3200 2700 2200 2000 6100 5700 3900 3000 2000 1900 1700 1300 3300 3000 2600 1900 5200 4600 3900 3500 3200 2700 2200 6100 5700 5000 3900 3500 3000 2400 2100 3500 3200 2700 2200 2000 mAmps +45C 100kHz Temp260C J-STD-020D 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 J-STD-020D Temp260C Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Moisture Rated Sensitivity Temp (C) 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (C) Rated Temp Other part number options: 1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2015_T520 * 11/29/2011 10 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current KEMET/EIA D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 W/7343-15 V/7343-19 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 H/7260-20 H/7260-20 (See below for part options) T520D337M006A(1)E009 T520D337M006A(1)E010 T520D337M006A(1)E015 T520D337M006A(1)E018 T520D337M006A(1)E025 T520D337M006A(1)E040 T520D337M006A(1)E045 T520Y337M006A(1)E010 T520Y337M006A(1)E015 T520Y337M006A(1)E025 T520Y337M006A(1)E040 T520W477M006A(1)E055 T520V477M006A(1)E055 T520Y477M006A(1)E010 T520Y477M006A(1)E015 T520Y477M006A(1)E018 T520Y477M006A(1)E025 T520Y477M006A(1)E035 T520D477M006A(1)E015 T520D477M006A(1)E025 T520D477M006A(1)E030 T520X477M006A(1)E010 T520X477M006A(1)E018 T520X477M006A(1)E035 T520X477M006A(1)E040 T520H108M006A(1)E055 T520H158M006A(1)E055 +20C Amps 208 208 208 208 208 208 208 208 208 208 208 296 296 296 296 296 296 296 296 296 296 296 296 296 296 630 945 +20C 120Hz % Max 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 20 20 +20C 100kHz mOhms 9 10 15 18 25 40 45 10 15 25 40 55 55 10 15 18 25 35 15 25 30 10 18 35 40 55 55 +45C 100kHz mAmps 5000 4700 3900 3500 3000 2400 2200 4900 4000 3100 2500 1800 1800 4900 4000 3700 3100 2600 3900 3000 2700 5000 3700 2700 2500 1800 1800 Temp260C J-STD-020D 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 Moisture Rated Sensitivity Temp 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 120Hz F 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 470 470 470 470 1000 1500 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 33 33 33 33 33 33 33 47 47 82 82 150 150 150 150 T/3528-12 T/3528-12 B/3528-20 B/3528-20 B/3528-20 B/3528-20 U/6032-15 B/3528-20 B/3528-20 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 V/7343-19 T520T336M008A(1)E070 T520T336M008A(1)E080 T520B336M008A(1)E025 T520B336M008A(1)E035 T520B336M008A(1)E040 T520B336M008A(1)E070 T520U336M008A(1)E070 T520B476M008A(1)E035 T520B476M008A(1)E070 T520C826M008A(1)E025 T520C826M008A(1)E045 T520D157M008A(1)E025 T520D157M008A(1)E040 T520D157M008A(1)E055 T520V157M008A(1)E040 26 26 26 26 26 26 26 38 38 66 66 120 120 120 120 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 70 80 25 35 40 70 70 35 70 25 45 25 40 55 40 1200 1100 2300 1900 1800 1300 1400 1900 1300 2600 1900 3000 2400 2000 2200 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 10 10 10 10 10 10 10 15 22 33 33 33 F 120Hz A/3216-18 A/3216-18 A/3216-18 T/3528-12 T/3528-12 T/3528-12 T520A106M010A(1)E080 T520A156M010A(1)E080 T520A226M010A(1)E080 T520T336M010A(1)E040 T520T336M010A(1)E070 T520T336M010A(1)E080 (see below for part options) 8 8 8 8 8 8 % Max +20C 120Hz 80 80 80 40 70 80 mOhms +20C 100kHz 1200 1200 1200 1600 1200 1100 mAmps +45C 100kHz 3 3 3 3 3 3 J-STD-020D Temp260C 105 105 105 105 105 105 KEMET/EIA 10 15 22 33 33 33 Amps +20C Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity VDC VDC Rated Voltage Rated Cap (C) 105 105 105 105 105 105 105 105 105 105 105 85 85 105 105 105 105 105 105 105 105 105 105 105 105 85 85 (C) Rated Temp Other part number options: 1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2015_T520 * 11/29/2011 11 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Table 1 - Ratings & Part Number Reference cont'd Rated Voltage VDC 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 VDC Rated Voltage Rated Cap 120Hz F 33 33 33 33 33 47 47 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 330 330 F 120Hz Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current KEMET/EIA B/3528-20 B/3528-20 B/3528-20 B/3528-20 U/6032-15 B/3528-20 B/3528-20 U/6032-15 C/6032-28 U/6032-15 W/7343-15 W/7343-15 C/6032-28 V/7343-19 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 C/6032-28 C/6032-28 L/6032-19 W/7343-15 V/7343-19 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 C/6032-28 V/7343-19 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 (See below for part options) T520B336M010A(1)E025 T520B336M010A(1)E035 T520B336M010A(1)E040 T520B336M010A(1)E070 T520U336M010A(1)E070 T520B476M010A(1)E035 T520B476M010A(1)E070 T520U476M010A(1)E055 T520C476M010A(1)E100 T520U686M010A(1)E055 T520W686M010A(1)E025 T520W686M010A(1)E040 T520C686M010A(1)E045 T520V686M010A(1)E025 T520V686M010A(1)E040 T520V686M010A(1)E045 T520V686M010A(1)E060 T520V686M010A(1)E100 T520D686M010A(1)E100 T520C107M010A(1)E025 T520C107M010A(1)E045 T520L107M010A(1)E025 T520W107M010A(1)E040 T520V107M010A(1)E018 T520V107M010A(1)E025 T520V107M010A(1)E045 T520V107M010A(1)E050 T520D107M010A(1)E018 T520D107M010A(1)E055 T520D107M010A(1)E080 T520C157M010A(1)E055 T520V157M010A(1)E018 T520V157M010A(1)E025 T520V157M010A(1)E040 T520D157M010A(1)E015 T520D157M010A(1)E018 T520D157M010A(1)E025 T520D157M010A(1)E040 T520D157M010A(1)E055 T520Y157M010A(1)E015 T520Y157M010A(1)E018 T520Y157M010A(1)E025 T520V227M010A(1)E045 T520V227M010A(1)E025 T520D227M010A(1)E018 T520D227M010A(1)E025 T520D227M010A(1)E040 T520Y227M010A(1)E040 T520Y337M010A(1)E010 T520Y337M010A(1)E015 KEMET/EIA (see below for part options) +20C Amps 33 33 33 33 33 47 47 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 330 330 Amps +20C +20C 120Hz % Max 8 8 8 8 8 8 8 8 8 8 10 10 8 10 10 10 10 10 10 8 8 8 10 10 10 10 10 10 10 10 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 % Max +20C 120Hz +20C 100kHz mOhms 25 35 40 70 70 35 70 55 100 55 25 40 45 25 40 45 60 100 100 25 45 25 40 18 25 45 50 18 55 80 55 18 25 40 15 18 25 40 55 15 18 25 45 25 18 25 40 40 10 15 mOhms +20C 100kHz +45C 100kHz mAmps 2300 1900 1800 1300 1400 1900 1300 1600 1300 1600 2700 2100 1900 2700 2200 2000 1800 1400 1500 2600 1900 2400 2100 3200 2700 2000 1900 3500 2000 1700 1700 3200 2700 2200 3900 3500 3000 2400 2000 4000 3700 3100 2000 2700 3500 3000 2400 2500 4900 4000 mAmps +45C 100kHz Temp260C J-STD-020D 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 J-STD-020D Temp260C Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Moisture Rated Sensitivity Temp (C) 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 (C) Rated Temp Other part number options: 1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2015_T520 * 11/29/2011 12 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Table 1 - Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current KEMET/EIA Y/7343-40 X/7343-43 X/7343-43 X/7343-43 (See below for part options) T520Y337M010A(1)E035 T520X337M010A(1)E010 T520X337M010A(1)E025 T520X337M010A(1)E040 +20C Amps 330 330 330 330 +20C 120Hz % Max 10 10 10 10 +20C 100kHz mOhms 35 10 25 40 +45C 100kHz mAmps 2600 5000 3100 2500 Temp260C J-STD-020D 3 3 3 3 Moisture Rated Sensitivity Temp 10 10 10 10 120Hz F 330 330 330 330 12.5 12.5 10 15 T/3528-12 T/3528-12 T520T106M12RA(1)E150 T520T156M12RA(1)E080 13 19 8 8 150 80 800 1100 3 3 105 105 16 16 16 16 16 16 16 16 16 16 16 16 16 10 22 33 33 33 33 47 47 47 47 47 68 150 B/3528-20 C/6032-28 W/7343-15 V/7343-19 V/7343-19 V/7343-19 W/7343-15 V/7343-19 V/7343-19 D/7343-31 D/7343-31 D/7343-31 X/7343-43 T520B106M016A(1)E100 T520C226M016A(1)E080 T520W336M016A(1)E045 T520V336M016A(1)E045 T520V336M016A(1)E060 T520V336M016A(1)E070 T520W476M016A(1)E045 T520V476M016A(1)E045 T520V476M016A(1)E070 T520D476M016A(1)E035 T520D476M016A(1)E070 T520D686M016A(1)E050 T520X157M016A(1)E040 16 35 53 53 53 53 75 75 75 75 75 109 240 8 8 10 10 10 10 10 10 10 10 10 10 10 100 80 45 45 60 70 45 45 70 35 70 50 40 1100 1400 2000 2000 1800 1600 2000 2000 1600 2500 1800 2100 2500 3 3 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 105 105 20 20 20 22 22 22 V/7343-19 V/7343-19 V/7343-19 T520V226M020A(1)E040 T520V226M020A(1)E045 T520V226M020A(1)E090 44 44 44 10 10 10 40 45 90 2200 2000 1400 3 3 3 105 105 105 25 25 25 15 15 15 F 120Hz V/7343-19 D/7343-31 D/7343-31 T520V156M025A(1)E090 T520D156M025A(1)E060 T520D156M025A(1)E080 (see below for part options) 38 38 38 Amps +20C 10 10 10 % Max +20C 120Hz 90 60 80 mOhms +20C 100kHz 1400 1900 1700 mAmps +45C 100kHz 3 3 3 J-STD-020D Temp260C 105 105 105 KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity VDC VDC Rated Voltage Rated Cap KEMET/EIA Case Code/ Case Size (C) 105 105 105 105 (C) Rated Temp Other part number options: 1- Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2015_T520 * 11/29/2011 13 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Derating Guidelines Voltage Rating Max Recommended Steady State Voltage Max Recommended Transient Voltage (1ms-1s) -55C to 105C 2.5V Vr 10V 90% of Vr Vr 12.5V Vr 16V 80% of Vr Vr Vr = Rated Voltage Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1) The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2) The negative peak AC voltage, in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the below left table. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Please refer to the below right table for temperature compensation requirements. Case Code KEMET T520T/T525T/ T540T T520M T520A T520B/T525B/ T540B T520U T520L T520C T520W T520V/T521V/ T522V T520D/T521D/ T525D/T540D T520Y/T522Y/ T525Y T520X/T521X T520H T528I T528K T528W T528Z T530/T541D T530/T541Y T530/T541X EIA Maximum Power Dissipation (P max) mWatts @ 45C w/ +30C Rise 3528-12 105 3528-15 3216-18 120 112 3538-21 127 6032-15 3528-19 6032-28 7343-15 135 150 165 180 7343-20 187 7343-31 225 7343-40 241 7343-43 7260-20 3216-10 3528-10 7343-15 7343-17 7343-31 7343-40 7443-43 247 187 95 150 325 325 255 263 270 Temperature Compensation Multipliers for Maximum Power Dissipation (P max) 45C 1.00 45C < T 85C 0.70 85C < T 125C 0.25 T= Environmental Temperature Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = P max/R E(max) = P max*R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation (watts) R = ESR at specified frequency (ohms) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 14 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Reverse Voltage Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. Temperature Permissible Transient Reverse Voltage 25C 55C 85C 105C 125C* 15% of Rated Voltage 10% of Rated Voltage 5% of Rated Voltage 3% of Rated Voltage 1% of Rated Voltage *For series rated to 125C Table 2 - Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA X Y C V1 V2 X Y C V1 V2 X Y C V1 V2 A 3216-18 1.35 2.15 1.45 6.10 2.80 1.25 1.75 1.35 5.00 2.30 1.15 1.35 1.25 4.10 2.00 B 3258-19 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20 C 6032-25 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.80 3.90 2.15 1.85 2.40 6.90 3.60 D 7343-31 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 H 7260-20 4.25 2.65 3.20 10.10 7.20 4.15 2.25 3.30 9.40 6.70 4.05 1.85 3.00 8.10 6.40 E 7260-38 4.25 2.65 3.20 10.10 7.20 4.15 2.25 3.30 9.40 6.70 4.05 1.85 3.00 8.10 6.40 R 2012-12 1.05 1.80 1.00 4.80 2.40 0.95 1.45 0.90 3.80 1.90 0.85 1.05 0.80 2.90 1.60 S 3216-12 1.35 2.15 1.45 6.10 2.80 1.25 1.75 1.35 5.00 2.30 1.15 1.35 1.25 4.10 2.00 T 3258-12 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20 U 6032-15 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.80 3.90 2.15 1.85 2.40 6.90 3.60 V 7343-20 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 X 7343-43 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 Y 7343-35 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). Height of these chips may create problems in wave soldering. Land pattern geometry is too small for silkscreen outline. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 15 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Soldering Process Note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal and is not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Min (TSmin) 100C 150C Temperature Max (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60-120 sec 60-120 sec Ramp-up Rate (TL to TP) 3C/sec max 3C/sec max Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60-150 sec 220C* 235C** 60-150 sec 250C* 260C** Peak Temperature (TP) Time within 5C of Max Peak Temperature (tP) 20 sec max 30 sec max Ramp-down Rate (TP to TL) 6C/sec max 6C/sec max Time 25C to Peak Temperature 6 minutes max 8 minutes max Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W and Z TP Temperature KEMET's families of surface mount capacitors are compatible with wave (single or dual), convection, IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. TL tP Max Ramp Up Rate = 3 C/sec Max Ramp Down Rate = 6 C/sec tL Tsmax Tsmin 25 tS 25 C to Peak Time Construction Polymer /Ta2O5/Ta Silver Adhesive Silver Paint Washer Leadframe (-Cathode) Leadframe (+Anode) Carbon Tantalum Wire Weld (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 16 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Capacitor Marking Rated Voltage 476 16 K 030 Polarity Indicator (+) (KO) KEMET Organic Polymer Picofarad Code KEMET ID Rated Voltage PWC* PWC* KO Polarity Indicator (+) KEMET ID 476 16V KO K (KO) KEMET Organic Polymer Picofarad Code A6 Internal Code 49 * 030 = 30th week of 2010 PWC* Year V = 2008 W = 2008 X = 2009 A = 2010 B = 2011 1 = Jan 2 = Feb 3 = Mar 4 = Apr 5 = May Month 7 = Jul 8 = Aug 9 = Spt O = Oct N = Nov C = 2012 6 = Jun D = Dec Storage All KO-CAP Series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classified as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working environments with temperatures not to exceed 40C and humidity not in excess of 60% RH. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 17 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Tape & Reel Packaging Information KEMET's Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-D: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Table 3 - Packaging Quantity Case Code KEMET R I S T M U L W Z V A B C D Y X E EIA 2012-12 3216-10 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-40 7343-43 7260-38 Tape Width-mm 7" Reel* 13" Reel* 8 8 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 2,500 3,000 2,500 2,500 2,000 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 10,000 12,000 10,000 10,000 8,000 5,000 5,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 18 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ODo Po [10 pitches cumulative tolerance on tape 0.2 mm] E1 Ao F Ko W B1 E2 Bo S1 P1 T1 Center Lines of Cavity OD 1 Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Embossment For cavity size, see Note 1 Table 5 User Direction of Unreeling Table 4 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 8 mm 12 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 16 mm D1 Min. Note 1 1.0 (0.039) 1.5 (0.059) E1 P0 P2 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) R Ref. Note 2 25.0 (0.984) 30 (1.181) S1 Min. Note 3 T Max. T1 Max. 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8 mm Single (4 mm) 12 mm Single (4 mm) & Double (8 mm) 16 mm Triple (12 mm) B1 Max. Note 4 4.35 (0.171) E2 Min. F P1 T2 Max W Max 6.25 (0.246) 3.5 0.05 (0.138 0.002) 4.0 0.10 (0.157 0.004) 2.5 (0.098) 8.3 (0.327) 8.2 (0.323) 10.25 (0.404) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 12.3 (0.484) 12.1 (0.476) 14.25 (0.561) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 16.3 (0.642) A0,B0 & K0 Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape with or without components shall pass around R without damage (see Figure 5). 3. If S1<1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Document 481 paragraph 4.3 (b)). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12mm tapes and 10 maximum for 16mm tapes (see Figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm tape (see Figure 4). (e) see Addendum in EIA Document 481 for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 19 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 12 mm & 16 mm 0.1 Newton to 1.0 Newton (10gf to 100gf) 0.1 Newton to 1.3 Newton (10gf to 130gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 30010 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624. Figure 2 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Maximum Width (mm) Rotation ( 8,12 20 16-200 10 Bo T) Typical Component Centerline Ao s Tape Width (mm) 8,12 16-56 72-200 Maximum Rotation ( 20 10 5 S) Figure 3 - Maximum Lateral Movement 8mm & 12mm Tape 16mm Tape 0.5 mm maximum 0.5 mm maximum 1.0 mm maximum 1.0 mm maximum Figure 4 - Bending Radius Embossed Carrier R Punched Carrier Bending Radius R (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 20 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Figure 5 - Reel Dimensions Full Radius, See Note W3 (Includes Access Hole at Slot Location (O 40 mm min.) flange distortion at outer edge) W2 (Measured at hub) D A N (See Note) C (Arbor hole diameter) B (see Note) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm min. width x 10.0 mm min. depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Min C D Min 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm Variable Dimensions -- Millimeters (Inches) Tape Size N Min 8 mm 12 mm 16 mm 50 (1.969) W1 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com W2 Max 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) W3 Shall accommodate tape width without interference T2015_T520 * 11/29/2011 21 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Figure 6 - Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only Round Sprocket Holes END START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum, Components 100 mm Min. Leader 400 mm Minimum, Top Cover Tape Figure 7 - Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 22 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum KEMET Corporation World Headquarters Europe Asia 2835 KEMET Way Simpsonville, SC 29681 Southern Europe Geneva, Switzerland Tel: 41-22-715-0100 Northeast Asia Paris, France Tel: 33-1-4646-1009 Shenzhen, China Tel: 86-755-2518-1306 Sasso Marconi, Italy Tel: 39-051-939111 Beijing, China Tel: 86-10-5829-1711 Milan, Italy Tel: 39-02-57518176 Shanghai, China Tel: 86-21-6447-0707 Fort Lauderdale, FL Tel: 954-766-2800 Rome, Italy Tel: 39-06-23231718 Taipei, Taiwan Tel: 886-2-27528585 North America Madrid, Spain Tel: 34-91-804-4303 Southeast Asia Mailing Address: P.O. Box 5928 Greenville, SC 29606 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Corporate Offices Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 West Chester, PA Tel: 610-692-4642 Central Europe Hong Kong Tel: 852-2305-1168 Singapore Tel: 65-6586-1900 Landsberg, Germany Tel: 49-8191-3350800 Penang, Malaysia Tel: 60-4-6430200 Dortmund, Germany Tel: 49-2307-3619672 Bangalore, India Tel: 91-806-53-76817 Kwidzyn, Poland Tel: 48-55-279-7025 Central Novi, MI Tel: 248-994-1030 Carmel, IN Tel: 317-706-6742 West Milpitas, CA Tel: 408-433-9950 Mexico Zapopan, Jalisco Tel: 52-33-3123-2141 Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-757201 Weymouth, United Kingdom Tel: 44-1305-830747 Coatbridge, Scotland Tel: 44-1236-434455 Farjestaden, Sweden Tel: 46-485-563934 Espoo, Finland Tel: 358-9-5406-5000 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 23 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Other KEMET Resources Tools Resource Location Configure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Contact Resource Location Website Contact Us Investor Relations www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifications, statements, information and data (collectively, the "Information") are subject to change without notice. All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 24 KEMET Organic Capacitor (KO-CAP) - T520 Series Polymer Tantalum Digitally signed by Marcy Brand DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy Brand, email=marcybrand@kemet.com Date: 2012.02.14 15:17:36 -05'00' (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2015_T520 * 11/29/2011 25