MURF1620CTG, SURF1620CT−SPG
http://onsemi.com
2
MAXIMUM RATINGS (Per Leg)
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
200 V
Average Rectified Forward Current
Per Diode, (Rated VR), TC = 150C
Total Device
IF(AV) 8
16
A
Peak Repetitive Forward Current
(Rated VR, Square Wave, 20 kHz), TC = 150C
IFM 16
A
Non−repetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
IFSM 100
A
Operating Junction and Storage Temperature TJ, Tstg −65 to +150 C
RMS Isolation Voltage
(t = 0.3 second, R.H. 30%, TA = 25C)
(Note 1) Per Figure 3
Viso1
4500
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Proper strike and creepage distance must be provided.
THERMAL CHARACTERISTICS (Per Leg)
Characteristic Symbol Value Unit
Maximum Thermal Resistance, Junction−to−Case RqJC 4.2 C/W
Lead Temperature for Soldering Purposes: 1/8 from the Case for 5 seconds TL260 C
ELECTRICAL CHARACTERISTICS (Per Leg)
Characteristic Symbol Value Unit
Maximum Instantaneous Forward Voltage (Note 2)
(iF = 8.0 A, TC = 150C)
(iF = 8.0 A, TC = 25C)
vF0.895
0.975
V
Maximum Instantaneous Reverse Current (Note 2)
(Rated DC Voltage, TC = 150C)
(Rated DC Voltage, TC = 25C)
iR250
5.0
mA
Maximum Reverse Recovery Time
(IF = 1.0 A, di/dt = 50 A/ms)
(IF = 0.5 A, iR = 1.0 A, IREC = 0.25 A)
trr 35
25
ns
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%.
VR, REVERSE VOLTAGE (VOLTS)
IR, REVERSE CURRENT (A)m
0.01
0.04
0.1
0.4
1.0
2.0
10
40
100
400
1.0 k
20016012080400
100
50
20
, INSTANTANEOUS FORWARD CURRENT (AMPS)
iF
10
5.0
2.0
1.0
0.1
0.2 0.4 0.6 0.8 1.0 1.2
vF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Typical Forward Voltage, Per Leg
0.3
TJ = 100C25C
20 60 100 140 180
TJ = 100C
25C
10 k
Figure 2. Typical Reverse Current, Per Leg*